Professional Documents
Culture Documents
BluestemElectricViolinPlan PDF
BluestemElectricViolinPlan PDF
1" r
1-1/2" r
3-1/4" long 4-1/2" long
1-7/8" TOP VIEW
7/16" r 1/2" r 1/2" r 3/4" r
M.O.P. inlay
1-1/4"
5/8" r Materials checklist:
1. 2-1/2" wide by 2" by 24" center section blank
2. 2-1/2" wide by 2" by 24" blank for both body wings
3. Set of 4 Ukulele tuners, black plastic buttons
4"
4. Ebony fingerboard nut
5. 2" by 5" by 3/32" ebony for headstock veneer (Cut 2) 7-3/4" by 2-5/8"
6. fingerboard blank
CUTTING PATTERN
7. Bridge
8. Tailpiece LAYER 2
9. Tailpiece fastener
10. Endpin
11. Chinrest
12. #10-32 tee nut & 1" #10-32 screw with flat washer
13. 8" by 15" by 1/8" figured wood for top and lower body wing
REAR VIEW
1/2" / 5/8" / 3/4" weight reducing chambers bored in wings and center section
Angled edges to match shoulder rest grips
3/4" by 5/8" thumb stop
Form to traditional shape
1/8" cap
17/32" 7/8"
7/16"
1-1/2"
1/2" radius 1/4"X1-1/2"
NOTE: Wings and body center section have extra material removed for weight reduction
1" radius
1/2"