Professional Documents
Culture Documents
Oil & Petrochemical Brochure - 2016
Oil & Petrochemical Brochure - 2016
TYPICAL USES:
ANALYSIS DESIGN TRAINING
Simulation. System sizing. System behavior examination.
Performance assessment. Component sizing. Performing basic ow and
Modication assessment. Determining operating ranges. heat transfer calculations.
Fault root cause assessment. Flow, temperature, pressure, Thermohydraulic principles
power consumption, etc. and properties referencing.
Testing of control philosophy.
Senior Thermal & Process Engineer
Gasco
I am not aware of any other tool with which I could have obtained the required results
in such a short time span. Part of the success must undoubtedly be attributed to the
prompt and high level support provided by Flownex International almost daily in
answering all my questions and oering suggestions throughout this very technically
challenging simulation. The support fee has been paid for with this one project!
www.ownex.com +27 18 297 0326/7 enquire1@ownex.com
STEAM SYSTEMS HEAT EXCHANGERS
Calculating heat transfer and pressure drop for
FEED WATER various geometries: nned tube, shell and tube,
Root cause analysis of pump NPSH problems. tube-in-tube, plate heat exchangers.
Analysis of feed water heater tube breaks. Calculating the heating or cooling requirement
Cavitation/phase change detection. for various processes: evaporation, condensation
or temperature control.
COOLING WATER CIRCUITS Calculation of natural circulation evaporators
Flow balancing. recirculation rate.
Pump and pipe sizing. Simulation of transient behavior for startup,
Energy optimization. shut-down or process upset conditions.
Heat load calculations. Calculation of temperatures and boiling pressure drop.
Heat exchanger sizing.
Calculation of metal temperature change rates
Water reticulation system design. during transients.
Water hammer analysis and prevention.
Environment - cooling tower - plant matching.
FIRE PROTECTION
SYSTEMS Pump, pipe and tank sizing.
Sizing of nozzles and orices.
Flow balancing.