This document is an exam for a reinforced concrete structures class. It contains two questions. Question 1 has 5 parts asking about assumptions of limit state design, doubly reinforced beams, characteristic strength/load, limit states in codes, and stress-strain diagrams for reinforced concrete sections. Question 2 has 4 parts asking students to design reinforced concrete beams and slabs given load and dimensional criteria.
This document is an exam for a reinforced concrete structures class. It contains two questions. Question 1 has 5 parts asking about assumptions of limit state design, doubly reinforced beams, characteristic strength/load, limit states in codes, and stress-strain diagrams for reinforced concrete sections. Question 2 has 4 parts asking students to design reinforced concrete beams and slabs given load and dimensional criteria.
This document is an exam for a reinforced concrete structures class. It contains two questions. Question 1 has 5 parts asking about assumptions of limit state design, doubly reinforced beams, characteristic strength/load, limit states in codes, and stress-strain diagrams for reinforced concrete sections. Question 2 has 4 parts asking students to design reinforced concrete beams and slabs given load and dimensional criteria.
Engineering & Technology Subject: Limit State Method for Reinforced Concrete Date: 06/08/15 Structures Maximum Marks: 30 Time: 10.30 -11.30 am Class: B. E. Civil (Old) Sem VII Duration : 1 Hr.
Q.1 Solve any FIVE. 2 X 5 =10
a. State the assumptions of Limit State Method of R. C.C. Design. b. When it is required to design doubly reinforced beams? c. Define Characteristic Strength and Characteristic Load. d. Explain different types o f Limit States given in IS code. e. Draw Stress- Stain diagram for Doubly Reinforced section and derive the formula for Ultimate moment of resistance form Compression Side. f. Draw Stress- Stain diagram for Singly Reinforced section and derive formula for maximum depth of Neutral Axis for Fe 415. g. Differentiate between One way and Two way slabs.
Q.2 Solve any TWO 10 X 2=20
a. Determine area of steel required for a singly reinforced beam 200 x 450 mm (effective) subjected to an ultimate moment of 70 kN.m. Assume M 20 and Fe 415. Draw neat sketch showing details. b. Design a simply supported slab for a room having internal dimensions 4 m x 5 m supported on 230 mm wall all around. Assume Live Load 3 kN/m2 and Floor Finish 1 kN/m2. Use M 20 and Fe 415. x= 0.0746 and Y = 0.056 c. A reinforced concrete beam has to carry a Dead load of 30 kN/m and a Live load of 20 kN/m over a span of 7m. Width of the beam is 230 mm and the effective depth is restricted to 550 mm. Use M 20 and Fe 415 d/d 0.05 0.1 0.15 0.2 Fsc N/mm2 355 353 342 329