Professional Documents
Culture Documents
04 Disassembly Assembly
04 Disassembly Assembly
Be sure to turn off the Power Switch before disassembling or as sembling the unit.
Be sure to use the rated parts when replacing electronic compon ents (check the Model
Name, the Rated Voltage/Current, the operating temperature, etc)
When repairing the unit, be sure to keep water away from the ha rness and assemble it
firm.
The assemble wire harness connectors should not be slipped out when pulling out
with moderate force.
When repairing the unit, be sure to remove dust or foreign subs tances completely from
the connector housing, the wire connection parts, the terminal contacts, etc.
It is to prevent any fire possibilities such as tracking, short , etc.
Check if there is any trace of water penetrated to the electric al components : If so,
replace the components or seal up the area with insulation tapes.
Check the assembled status of the components after repairing th e unit : Keep the
assembled status the same as the previous status.
Check its using environments (The Robot Cleaner is for domestic & indoor use.) :
When it is used for other purposes, it may cause major damages to the unit (operation
error, broken down, etc).
Do not Use : Attics, Underground Floor, Warehouse, Industrial B uilding, Watery Area,
Fire hazard area, Narrow & High Laying Areas s uch as Table, other not residential
area.
Do not have the customers repair the unit by themselves.
Tools for disassembly and assembly : Flat Head Screwdriver, Phi llips Screwdriver.
4-1
AUTOBOTSM(DJ68-00201G).indd37 2010.6.2512:56:13PM
Disassembly & Assembly
(1)
Flip over the Main Body and turn
Turn off
off the Power Switch (OFF).
main power
(3)
ASSY DRUM
BRUSH
Lift up the Power Brush from
(Power Brush)
the Main Body and separate it.
Power Brush
4-2
AUTOBOTSM(DJ68-00201G).indd38 2010.6.2512:56:15PM
Disassembly & Assembly
Battery Cover
(5)
ASSY
BATTERY
Lift up the ASSY BATTERY and
(Battery)
disassemble the Connector
from the Main Body.
(6)
ASSY BODY
BUMPER
4-3
AUTOBOTSM(DJ68-00201G).indd39 2010.6.2512:56:17PM
Disassembly & Assembly
(6)
ASSY BODY Separate the Connector from
BUMPER the Main Body.
When reassembling, push the
ASSY BODY BUMPER in all
the way to the CAP SCREW
ASSY Hole.
COVER SIDE L
(8)
PANEL
CONTROL Press the two locking tabs and
remove the PANEL CONTROL
by flipping it over backwards.
PANEL CONTROL
4-4
AUTOBOTSM(DJ68-00201G).indd40 2010.6.2512:56:18PM
Disassembly & Assembly
BODY MID
PBA
DISPLAY
(10)
ASSY PBA
Remove all the connectors from
the PBA MAIN and the screws
MAIN
(4ea). And then, separate the
PBA MAIN.
PBA MAIN
4-5
AUTOBOTSM(DJ68-00201G).indd41 2010.6.2512:56:20PM
Disassembly & Assembly
4-6
AUTOBOTSM(DJ68-00201G).indd42 2010.6.2512:56:21PM
Disassembly & Assembly
4-7
AUTOBOTSM(DJ68-00201G).indd43 2010.6.2512:56:23PM
Disassembly & Assembly
(17)
ASSY
Remove the screw (1ea) and
SWITCH
separate the MICRO S/W.
MICRO
DUST
(18)
WIRE Press the side locking tap with the
HARNESS Flat Head Screwdriver and
MAIN separate the Power Switch.
SWITCH
(19)
ASSY Remove the screws (2ea) and
MOTOR separate the Suction Motor.
FAN
4-8
AUTOBOTSM(DJ68-00201G).indd44 2010.6.2512:56:25PM
Disassembly & Assembly
4-9
AUTOBOTSM(DJ68-00201G).indd45 2010.6.2512:56:26PM
4-3. Charger Disassembly & Assembly
(1)
BODY
Remove the screws
(2ea) and separate the
CHARGER
COVER CHARGER
&
FRONT.
COVER
CHARGER
FRONT
Remove the WIRE
HARNESS CHARGER
MAIN.
(3)
CBF Separate the CBF POWER
POWER CORD
CORD
4-10
AUTOBOTSM(DJ68-00201G).indd46 2010.6.2512:56:29PM
Disassembly & Assembly
A Type B Type
4-4-1. A Type
(1) Open the COVER BATTERY
BATTERY and remove the batteries.
Remove the WIRE
4-11
AUTOBOTSM(DJ68-00201G).indd47 2010.6.2512:56:32PM
Disassembly & Assembly
Remove the screw (1ea) from
the HOLDER BUTTON
(2)
PBA
SWITCH
Separate the PBA SWITCH
(3)
Remove the screw (1ea) and
PBAS/
separate the PBA-S/G MAIN
G MAIN
4-12
AUTOBOTSM(DJ68-00201G).indd48 2010.6.2512:56:35PM
Disassembly & Assembly
4-4-2. B Type
(2) PBA
Virtual Guard
4-13
AUTOBOTSM(DJ68-00201G).indd49 2010.6.2512:56:42PM