The document provides technical specifications for three items:
1. An incinerator for burning medical waste with details on its model, operating conditions, construction materials, air supply system, fuel system, and controls.
2. A milling unit for processing used syringes and needles with details on its operating parameters, capacity for different syringe sizes, dimensions, and disinfecting system.
3. A storage building for medical waste with details on its dimensions, concrete floor, steel framing, wall and roof materials.
The document provides technical specifications for three items:
1. An incinerator for burning medical waste with details on its model, operating conditions, construction materials, air supply system, fuel system, and controls.
2. A milling unit for processing used syringes and needles with details on its operating parameters, capacity for different syringe sizes, dimensions, and disinfecting system.
3. A storage building for medical waste with details on its dimensions, concrete floor, steel framing, wall and roof materials.
The document provides technical specifications for three items:
1. An incinerator for burning medical waste with details on its model, operating conditions, construction materials, air supply system, fuel system, and controls.
2. A milling unit for processing used syringes and needles with details on its operating parameters, capacity for different syringe sizes, dimensions, and disinfecting system.
3. A storage building for medical waste with details on its dimensions, concrete floor, steel framing, wall and roof materials.
Manufacturer : CMC Model : CT-850 Specification : A. GENERAL 1. Model : CT 850 2. Type : Pressure Jet Incinerator ( Smokeless ) 3. Working hour / day : 16 hours / day 4. Capacity : 1 m/hour B. OPERATING CONDITION 1. Type of waste : Domestic Waste 2. Volume of chamber : 1 m 3. Temperature on chamber : 600 - 1200 C 4. Temperature resistance on chamber : 1600 C 5. Pressure combustion (negative / positive) : Negative 6. Retention time (sec.) : < 2 sec. 7. Percentage of Ash (% - weight) : 5 % - 10 % C. CONSTRUCTION 1. Space of combustion: Combustion : Square Length x Width x Height : 1.700 x 1.200 x 1.300 mm 2. Verandah Diaphragm: Thickness : 80 mm Aperture : 150 mm Content : Stainless steel pin weaved Construction : Indemnification method 3. Exhaust Stack (Chimney): Diameter : 305 mm Length : 4.000 mm from ground level D. MATERIAL Material of Incinerator : Shell : Mild Steel Refractory : Fire brick, castable cement Isolator : Ceramic fiber, heat resistance 1.450C Coating : High temp. paint 600C Door : Mild steel and lining with castable E. AIR SUPPLY SYSTEM Blower: Model / Type : Centrifugal fan Capacity (m / minute) : 3.200 m / hour Static pressure (bar) : 30 50 mbar Quantity (unit) : 1 (one) unit F. FUEL SYSTEM Combustion burner: Type : Gun Type Fuel : Diesel Oil/Kerosine Fuel Consumption : 11,5 lt/hr Quantity : 1 (one) unit Fuel Tank : 200 lt G. INSTRUMENTATION & CONTROL 1. Temperature Control : Model : Digital Quantity (unit) : 1 (one) unit Control Mode : On Off 2. Power Supply (volts / phase / hertz) : 20A / 220 V / 1 Phase / 50 Hz 3. Panel enclosure : Mild Steel, Indoor Service 4. Mounting : Include 5. Thermocouple :K Quantity : 1 (one) unit Material : Stainless Steel 6. Timer : 0 10 hours 7. De Ashing : Manual 8. Total Weight : 1.820 kg II. USED SYRINGES & NEEDLES MILLING UNIT Model : Syro Merk : CMC Type :C Workplace related emission LpAeq : 81 dB (A) Operating condition : bottom sieve = 0,5 mm conidur Diameter of sieve : 0,01 mm 1 mm Safety operation : self termination Body frame : Dural Aluminium Feeding angle : 75 0 clock wise side Parameter per setting up location
The ambient temperature between 410F and 1040F.
Maximum relative humidity 80 % at temperature of 87,00 F, falling in a linear fashion to 50% relative humidity at 400F. Capacity : - 375 pcs 0.5 ml syringe and needle / hour (small syringe) 300 pcs 2.5 ml syringe and needle / hour 275 pcs 3 ml syringe and needle / hour 200 pcs 5 ml syringe and needle / hour 100 pcs 10 ml syringe and needle / hour (large syringe) Electrical : 1.5 kW ; 1 or 3 phase ; 50 60 Hz ; 1420 1720 rpm Diameter : Height : approx. 1.160 mm Width : approx. 740 mm Depth : approx. 630 mm Net weight : 64 Kg Required standing area : 1.000 mm x 1.000 mm: no safety distance necessary Disinfecting Apparatus : * Intermittent Flow Transfer * Compatible with low viscosity disinfecting solution only * Automatic operation III. BANGUNAN PENAMPUNG Dimensi : Panjang x Lebar x Tinggi : 3.000 x 3.000 x 3.000 mm Lantai Cor Beton ,tebal 10 cm. Rangka dinding : Kolom CNP 150 x 50 x 20 x 2,3 ( Double ) Dinding - Dari lantai 0 - 1.1 m = tembok dengan pasangan bata diacihalus dan dicat. Dari ketinggian 1.1m - 3.5 m = tralis ( Bechel 8 mm ) Rangka atap : Baja CNP 125 x 50 x 20 x 2,3 ( Double ) Gordeng : Baja CNP 75 x 45 x 15 x 2,3 Atap Asbes Gelombang Kecil Nok Asbes Gelombang Kecil