Professional Documents
Culture Documents
Twi Cswip 3.1 Set-4b - 1
Twi Cswip 3.1 Set-4b - 1
4 & 5. Burn through is occur due to Ans: High current ( two time same
question they ask both same answer)
11. Radio graphy testing- Ans : Lack of fusion and lack of penetration both
same appearance.
12. NDT Ans : MPT can use the testing of surface and sub surface.
15.IF essential variable change what will happen Ans: Mechanical properties
will affect.
16.WPS?
A. All the parameters can allow to use.
B. WPS for test coupon.
C.Parameters used for welder qualification.
D. All of the above.
18.During inspection you feel the weld profile is poor but as per the section it
is accepted what kind of action you will take.
Ans: Accept.
27.Solidification cracking ?
A. It will occur only SAW process and It may occur in MMA process also
sometime.
B. High thickness butt joint in SAW process only.
C.Option A is correct it may occur in MMA process also.
D. None of the above.
28. RT technic.
A. 600 MM dia pipe with internal acces- DWSI
B.80 MM dia pipe-DWSI
C. 90 MM dia pipe- DWDI
D. OPTION C PIPE DIA CAN DO SWSI
29.NDT?
Options I am not sure but below mention the option will come i thing and
easily can answer this question.
A.UT test only one side access is required.
B.RT both side access is required.
30.HICC?
A.Cold crack.
B.Hot crack.
C.Hot shortness.
D. Weld centreline crack.
31.Lamaller tearing.
Ans: Low through thickness ductility.
33.Weld decay ?
Ans : It is a chromium carbide formation.
40.TIG?
Ans: AC & DC current can use with all materials.
42.Preheat ?
Ans; Toughness increase and slow cooling rate.
43.solidification cracking?
A.Reduce carbon content in parent metal.
B.High restraint if we use we can avoid solidification crack.
C.Moliybdnum reduce can avoid.
D.None of the above.
44.If welder used wrong electrode what action will you take?
Ans: Prepare the investigation report and inform to superior.