Professional Documents
Culture Documents
Interior Equipment
Interior Equipment
Interior equipment 68
EXIT
68 Interior equipment
Job No.
Instrument panel
Removal and rnstallatron of instrument panel . 68-l 00
Removal and tnstallation of cover for speaker . . . 1 0 5
Removal and rnstallatton of glove box cover . . . 120
Removal and rnstallation of lock on glove box cover 1 3 0
Removal and rnstallation of glove box . . . . 1 4 0
Removal and rnstallation of cover under Instrument panel 1 5 0
Center console
Removal and rnstallation of center console .......... 2 0 0
A. Center console upper half ................
B. Center console lower half ..................
Removal and installatton of cover on shift lever . 2 3 0
R e m o v a l a n d r n s t a l l a t i o n o f c o v e r o n s h i f t lever(automatrc t r a n s m i s s i o n ) 2 3 1
Paneling (trim)
Removal and Installation of reveal moldrng on wrndshreld top ............................. 400
Removal and rnstallatron of reveal molding laterally on windshield ......................... 405
Removal and rnstallatron of headlining .......... .... .............................. 430
Removal and rnstallatron of edge protectron under driver and rear door .................... 442
Removal and rnstallatron of paneling (trim) on rear pillar ................................. 449
Removal and rnstallatron of hat rack and first aid kit ..... .............................. 458
Removal and rnstallatron of panelrng (trim) on center prllar .............................. 470
Removal and installation of panelrng (trim) on rear center piece ........................... 485
Removal and rnstallatron of cushronrng elements on transmrssron tunnel, outside ............. 492
6811
EXIT
Removal
68.6-100/l F2
EXIT
68.6-100/2
EXIT
68.6-100/3
EXIT
m-24243
68.6-100/4
EXIT
68.6-100/5
EXIT
......................................................................
...
.......................................................................
Installation
68.6-100/6 F2
EXIT
Removal
Installation
68.6-105/l
EXIT
Removal
Installation
68.6-120/l
EXIT
Removal
Installation
68.6-130/l
EXIT
Removal
Installation
68.6- 14011
EXIT
Removal
3 Remove cover.
Installation
68.6-150/l
EXIT
Removal
68.6-200/l
EXIT
Removal
68.6-200/2
EXIT
68.6-20013
EXIT
68.6-200/4
EXIT
Installation
Attention!
In order to avoid malfunction of hand brake lever,
make absolutely sure that the covering of the hand
brake lever in the rear lower range is pressed down
by the lug on the hand brake lever.
68.6-200/5 F 2
................................................ ...... .... EXIT
Removal
Installation
68.6-23011
EXIT
Removal, installation
Installation
66.6-231/l F 3
EXIT
Removal
68.6-400/l F 3
EXIT
Installation
68.6-400/2
EXIT
Removal
Installation
68.640511
EXIT
68.6-430/f I= 4
EXIT
68.6-43012 F 3
EXIT
1 st version
0162 - 35047
2nd version I
Attention!
On some vehicles with electric sliding roof the rear
bow is additionally attached to teleflex tube by
means of a cable strap, During removal, open cable
strap and remove bow.
0166-36030 1
68.6-43013 F 4
EXIT
Installation
68.6-43014 F 4
EXIT
68-442 Removal and installation of edge protection under drivers and rear door
Removal
Installation
68.6-44211 F2
EXIT
68.6-44212 F 2
EXIT
Removal
68.6-449/ 1 F2
EXIT
68.644912
.............................._ EXIT
Removal
Installation
68.6-45811 F 2
EXIT
Removal
Installation
66.6-470/l F 3
EXIT
68.6-47012 F 3
............................................................. .......................... ... ................................... EXIT
Removal
68.6-48511 F 2
EXIT
Note
Removal
Installation
Attention!
Replace torn off or missing weld studs with a folding
rivet nut and screw bolt. Collar screw parts set, part
No. 000 990 12 10.
68.6-49211 F 3
EXIT
Removal
2 Lift off cover front and pull out at the rear from
holding clip.
Installation
68.6-49511 F 2