16.Dcs&Lte1800&Wcdma2100 Amplifier 20w 4g

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

ATML43A: DCS/LTE1800&WCDMA2100

Dual Band Trunk Amplifier

The Trunk Amplifier is designed to provide a more cost-effective solution than adding a new Base Transceiver
Station (BTS) to improve signal coverage and communication quality in mobile system. And its easy installation and
maintenance can help carrier get fast return.
The Trunk Amplifier is working as a relay between the repeater and distributed antennas.
It receives the low-power signal from Trunk line of indoor distribution system via the coupler, linearly amplifies the signal
and then retransmits it via the cables to the antenna distribution system. And the mobile signal is also amplified and
retransmitted to the repeater via the opposite direction.

Features
Aluminum-alloy casing with IP65 protection has high resistance to dust, water and corroding
Low interference to BTS by adopting linear amplifier with high gain and low noise
Adopting filter with highly selectivity and low insertion loss eliminates interference between uplink and downlink
USB port provides a link to a notebook for local supervision or to the built-in wireless modem to communicate with the
NMS (Network Management System) that can remotely supervise repeaters working status and download operational
parameters to the repeater

Applications
To expand signal coverage or enhance signal blind area where signal is weak or unavailable.
Indoor: Hotels, exhibition centers, basements, shopping malls, offices, parking lots,

Application Diagram

IBS/DAS

Trunk Amplifier

BTS

www.action-intl.com
Technical Specifications

Items Specifications

System DCS1800/LTE1800 WCDMA2100


Uplink 1710~1785MHz 1920~1980MHz
Frequency Range
Downlink 1805~1880MHz 2110~2170MHz

Maximum Gain 453dB 453dB

Uplink 0dBm 0dBm


Output Power
Downlink 43dBm 43dBm

Uplink 0dBm+2dBm(Plus 10dB input signal)


ALC
Downlink 43dBm+2dBm(Plus 10dB input signal)
Gain Adjustment Range 1~20 dB @ step of 1 dB

Maximum Input Power 0dBm

In-band Flatness(Typical) 5dB 3dB@3.84MHz


Noise Figure 6dB

VSWR 1.5
System Delay 1.5 us
Peak Code Domain Error (PCDE) -35dB
Error Vector Magnitude (EVM) 8% 12.5%

9KHz-1GHz -36dBm/30KHz
Spurious Emission
1GHz-12.75GHz-30dBm/30KHz

Third-order Inter-Modulation Comply with 3GPP TS 36.143 V11.2.0

Output/input Impedance 50

RF Connector N-Female (1 port in-1port out)


Working Temperature -25C ~+55C

Relative Humidity 5~95% RH


Power Supply AC220V, 50/60Hz

Dimensions 640mm400mm230mm

Weight 35kg

Application Indoor or outdoor(IP65)

Interface Cable(Local) USB

Remote Control Module Wireless Modem (GSM)


Real-time alarm for door status, temperature, power supply, VSWR, etc;
NMS Controlled Parameters
Remote control such as turn on/off, increasing/decreasing output power etc;
Real-time status for output power, gain, all status of repeater etc.

www.action-intl.com

You might also like