Download as doc, pdf, or txt
Download as doc, pdf, or txt
You are on page 1of 1

Final Plan New Cut Summary Data Sheet

PAGE ___ OF __
Program Licensee Name: Program Licence Number:
Prospect Name: Geophysical File Number:
Company Contact: Phone Number:
Twp.: Rge.: W

Refer to the Policy and Procedures Document for Submitting the Geophysical Field Report Form (PPD).

Note: See the PPD for definitions of LIS and Conventional lines.

The columns below apply to new cut lines and helipads.

A line is no longer considered existing if natural regeneration is greater than 2 m (height), or if silviculture, planting or seeding has been undertaken.

Line Number (where Segment Distance (m) Conventional (Straight) LIS Average Width (m) LIS Average Width (m) *Access Average Width *Detours Average Width *Helipad(s) Average
applicable) or Number of Sites Average Width (m) (rebate) (no rebate) (m) (m) Area (ha)

Timber damages are to be calculated for new cut programs in the Green Area only.
* Where minimal clearing was carried out, the requirement to count the site as new cut may be waived in writing at the discretion of the inspector.

GEO 46D (2013/11/30)

Alberta Energy Regulator Twin Atria Building, 4th Floor, 4999 98 Avenue, Edmonton, Alberta T6B 2X3 Page 1 of 1

You might also like