Professional Documents
Culture Documents
Gei 100727d
Gei 100727d
Note Refer to GEH-6721_Vol_II, Mark VIe Control, Volume II System Hardware Guide
for more detailed information.
GEI-100727D 3
For public disclosure
2 Packaging
I/O modules consist of an I/O pack mounted on a terminal board. The I/O pack contains a
local processor with a QNX operating system and a data acquisition board. The terminal
board contains a terminal block for field wiring and passive circuits that connect the
terminal block to the I/O pack. Terminal blocks can be removed from the I/O module with
field wiring attached in the unlikely event of a failure of the passive circuits on the
module.
contain two 24 point, barrier type, pluggable, terminal blocks. Each point can accept two
2.05 mm (0.081 in) #12 AWG wires with 300 V insulation per point with ring type lugs.
In addition, captive clamps are provided for terminating bare wires. Screw spacing is 9.53
mm (0.375 in) minimum, center-to-center. T-type modules are normally base mounted
and support multiple I/O packs.
S-type modules have box type terminal blocks that accept one 2.05 mm2 (0.081 in2) #12
AWG wire, or two 1.63 mm2 (0.064 in2) #14 AWG) wires with 300 V insulation per
point. Screw spacing is 5.08 mm (0.2 in) minimum, center-to-center. S-type modules are
DIN-rail and base mounted and support one I/O pack.
DIN Rail or Surface Mounted I/O Pack
Diagnostic LEDs
Customer Wiring
IONet (Ethernet Cat. 5 )
H1 Fixed Second IONet Port
H2 Pluggable
24 V dc Power
DIN Rail
4 Diagnostics
Each I/O pack transmits diagnostic messages to the controllers and contains local status
LEDs. There are application-specific LEDs, such as those used for status indication of
discrete inputs and six generic LEDs, on all packs including:
GEI-100727D 5
For public disclosure
5 Specifications
The first two tables in this section contain specifications that are common to all I/O
modules, associated terminal boards, and terminal blocks. The tables that follow contain
specifications for the I/O packs and boards indicated in each table.
Environmental Specifications for I/O Modules, Terminal Boards, and Terminal Blocks Meets EN50178 Section A.6.1.4
Table A.2 (m)
Seismic Universal building code (UBC) Seismic code section 2312 Zone 4 with operation without trip
Operating Temperature -30 to 65C (-22 to 149 F), local temperature sensor in I/O pack
Other Specifications for I/O Modules, Terminal Boards, and Terminal Blocks
Terminal board sizes TBAIH1C 10.16 cm wide x 33.02 cm high (4.0 x 13 in)
STAIH1A, 2A 10.2 cm wide x 15.9 cm high (4.0 x 6.25 in)
SAIIH1A, 2A 17.8 cm wide x 15.9 cm high (7.0 x 6.25 in)
Item Specification
Analog I/O types 2, 3, and 4 wire transmitters. External and internal power 24 V dc
Scan time Normal scan, 5 ms (200 Hz). Note that maximum controller frame rate is 100 Hz
Measurement accuracy 0.1% of full scale over the full operating temperature range
Noise suppression on inputs The 10 circuits have a hardware filter with single pole down break at 500 rad/sec. A software
filter, using a two pole low pass filter, is configurable for: 0.75 Hz, 1.5 Hz, 3 Hz, 6 Hz, 12 Hz
Common mode rejection Ac common mode rejection 60 dB at 60 Hz, with up to 5 V common mode voltage
Dc common mode rejection 80 dB with from -5 to 7 peak V common mode voltage
GEI-100727D 7
For public disclosure
Type: 10AI (V/I Inputs) and 2AO (4-20 mA Outputs) with HART
Terminal board types SHRAH1A One 48 point, box type terminal block, not removable, 1 I/O pack per board
SHRAH2A One 48 point, box type terminal block, removable, 1 I/O pack per board
Terminal board sizes 15.9 cm high x 17.8 cm wide (6.25 x 7.0 in)
Item Specification
Analog I/O types 2, 3, and 4 wire transmitters. External and internal power 24 V dc
Scan time Normal scan 5 ms (200 Hz). Note that controller frame rate is 100 Hz
Measurement accuracy Better than 0.1% full scale over the full operating temperature range
Noise suppression on inputs The 10 circuits have a hardware filter with two poles at 12.5 Hz and 48.3 Hz. A software filter,
using a two-pole, low-pass filter, is configurable for: 0.75 Hz, 1.5 Hz, 3 Hz, 6 Hz, 12 Hz
Common mode rejection Ac common mode rejection 60 dB at 60 Hz, with up to 5 V common mode voltage
Dc common mode rejection 80 dB with -5 to 7 peak V common mode voltage
Terminal board types TBAOH1C Two 24 point, barrier type terminal blocks, removable, 1 or 2 I/O packs per board
STAOH1A One 36 point, box type terminal block, not removable, 1 I/O pack per board
STAOH2A One 36 point, box type terminal block, removable, 1 I/O pack per board
Terminal board sizes TBAOH1C 10.16 cm wide x 33.02 cm high (4.0 x 13 in)
STAOH1A, 2A 15.9 cm high x 10.2 cm wide (6.25 x 4.0 in)
Item Specification
Number of channels TBAOH1C 16 current output channels, single-ended (one side connected to common)
STAOH1A, 2A 8 current output channels, single-ended (one side connected to common)
Measurement accuracy 0.5% over the full operating temperature range and 0 to 900 load impedance
Output type 0 20 mA
GEI-100727D 9
For public disclosure
7 Thermocouples
Type: 12 / 24 Thermocouples
Terminal board types TBTCH1B Two 24 point, barrier type terminal blocks, removable, 1, 2, or 3 I/O packs per
board
TBTCH1C Two 24 point, barrier type terminal blocks, removable, 1 or 2 I/O packs per board
STTCH1A One 42 point, box type terminal block, not removable, 1 I/O pack per board
STTCH2A One 42 point, box type terminal block, removable, 1 I/O pack per board
Terminal board sizes TBTCH1B, 1C 10.16 cm wide x 33.02 cm high (4.0 x 13 in)
STTCH1A, 2 A 10.2 cm wide x 15.9 cm high (4.0 x 6.25 in)
Item Specification
Number of channels 12 channels per I/O pack (24 total when using 2 I/O packs)
Scan time All inputs are sampled at up to 120 times per sec per input
Common mode rejection AC common mode rejection 110 dB at 50/60 Hz, for balanced impedance input. Both
hardware and firmware filtering
Cold junction temperature Cold junction accuracy 1.1C (2 F) A 0.6C (1 F) error in the CJ compensation will cause a
accuracy 0.6C (1 F) error in the thermocouple reading, for a total of 1.2C (2 F).
Terminal board types TRTDH1D Two 24 point, barrier type terminal blocks, removable, 1 or 2 I/O packs per board
TRTDH2D Two 24 point, barrier type terminal blocks, removable, 1 or 2 I/O packs per board
SRTDH1A One 36 point, box type terminal block, not removable, 1 I/O pack per board
SRTDH2A One 36 point, box type terminal block, removable, 1 I/O pack per board
Terminal board sizes TRTDH1D, 2D 10.16 cm wide x 33.02 cm high (4.0 x 13 in)
SRTDH1A, 2 A 10.2 cm wide x 15.9 cm high (4.0 x 6.25 in)
Number of channels 8 channels per I/O pack (16 channels per terminal board)
GEI-100727D 11
For public disclosure
9 Discrete Input Modules
Type: 24 DI Group Isolated (125, 24, 48 V dc) 1 ms Sequence of Events (SOE)
Terminal board types TBCIH1C, 2C, 3C Two 24 point, barrier type terminal blocks, removable, 1, 2, or 3 I/O packs
per board
STCIH1A One 52 point, box type terminal block, not removable, 1 I/O pack per board
STCIH2A, 4B, 6B One 52 point, box type terminal block, removable, 1 I/O pack per board
Terminal board sizes TBCIH1C, 2 C, 3 C 10.16 cm wide x 33.02 cm high (4.0 x 13 in)
TICIH1A, 2A 10.16 cm wide x 33.02 cm high (4.0 ix 13 in)
STCIH1A, 2 A, 4 A, 6 A 10.2 cm wide x 15.9 cm high (4.0 x 6.25 in)
Item Specification
Terminal board types SDIIH1 One 16 point, box type terminal block, removable, 1 I/O pack per board
Terminal board sizes SDIIH1 17.8 cm wide x 15.9 cm high (7.0 x 6.25 in)
Item Specification
Number of channels 16
Input isolation in pack Optical isolation to 1500 V on all inputs
Input filter Hardware filter: 10, 20, 50, 100 ms, none
Voltage ranges SDIIH1 24, 48, 125, 250 V dc, 115, 230 V ac rms point isolated
SDIIH1 and WDIIH1 Wetting voltages 24 V dc, 115, 230 V ac rms
SDIIH1 and WDIIH2 Wetting voltages 48 V dc,
SDIIH1 and WDIIH3 Wetting voltages 125 V dc, no option for point isolation
Voltage ranges for point isolated inputs:
Nominal 24 V dc (14 - 32 V dc)
Nominal 48 V dc (19 - 64 V dc)
Nominal 125 V dc (50 - 156 V dc)
Nominal 250 V dc (100 - 264 V dc)
Nominal 115 V ac rms (90 - 143 V ac rms), 50/60 Hz 3 Hz
Nominal 230 V ac rms (90 - 265 V ac rms), 50/60 Hz 3 Hz
Refer to GEI-100739, Mark VIe Control Isolated Discrete Input (PDII) Module
Description for additional information.
GEI-100727D 13
For public disclosure
Type: 24 DI Point Isolated (24, 125, 250 V dc with 1 ms SOE, 115/230 V ac with 3 ms SOE)
Terminal board types TICIH1A, 2A Two 24 point, box type terminal blocks, removable, 1, 2, or 3 I/O packs per
board
Terminal board sizes TICIH1A, 2A 17 cm high x 33.02 cm wide (7.0 x 13 in)
Item Specification
Terminal board types TDBS Two 48 point, box type terminal blocks, removable, 1 I/O pack per board
TDBT Two 48 point, box type terminal blocks, removable, 3 I/O packs per board
Available daughter boards:
WROBH1A adds solenoid interface to first 6 circuits
WROFH1A adds fuse in COM leg of all 12 circuits
WROGH1A adds fuse power distribution in COM leg of all 12 circuits
Item Specification
Relay and coil monitoring 15 pack inputs. The selection of monitor feedbacks depends on the type of terminal board
used, based on ID chip
Physical Specification
SOE reporting Each relay may be configured to report operation in the SOE record.
GEI-100727D 15
For public disclosure
I/O Pack PDIOH1A
WROBH1 Option Board
Powered Output Circuits 6 fused, associated with relays 1 - 6, fed from parallel connectors JF1 and JF2. Both sides of
the power source are fused for each output. MOV suppression on NO contact.
1 unfused, associated with relay 12, fed from connector JG1. MOV suppression on NO contact
Powered Output Circuits 12 fused circuits, one associated with each relay. Single side fusing of the power is associated
with the power input on JF1 pin 1. Return power path through JF1pin 3 is not fused.
Terminal board types TRLYH1B, 1C, 2C Two 24 point, barrier type terminal blocks, removable, 1 or 3 I/O packs
per board
TRLYH1D One 24 point, barrier type terminal blocks, removable, 1 or 3 I/O packs per board
SRLYH1A One 48 point, box type terminal block, not removable, 1 I/O pack per board
SRLYH2A One 48 point, box type terminal block, removable, 1 I/O pack per board
Available daughter boards for SRLYH2A:
WROBH1A adds solenoid interface to first 6 circuits
WROFH1A adds fuse in COM leg of all 12 circuits
WROGH1A adds fuse power distribution in COM leg of all 12 circuits
Terminal board sizes TRLY 17.8 cm wide x 33.02 cm high (7.0 x 13 in)
SRLY 17.8 cm wide x 15.9 cm high (7.0 x 6.29 in)
Item Specification
Relay contact current rating 0.6 A at 125 V dc, 3.0 A at 24 V dc, 3.0 A at 120/240 V ac, 50/60 Hz
For solenoid drivers:
At 24 V dc < 2 A, L/R 7 ms, without suppression
At 125 V dc < 0.2 A, L/R 7 ms, without suppression
At 125 V dc < 0.65 A, L/R 150 ms, with suppression
Relay and coil monitoring 15 pack inputs. The selection of monitor feedbacks depends on the type of terminal board
used, based on ID chip
Physical Specification
GEI-100727D 17
For public disclosure
I/O Pack PDOAH1A
SRLYH1A, 2A Relay position feedback using contact pair separate from load contacts
Powered Output Circuits 6 fused, associated with relays 1-6, fed from parallel connectors JF1 and JF2. Both sides of
the power source are fused for each output.
1 unfused, associated with relay 12, fed from connector JG1
Powered Output Circuits 12 fused circuits, one associated with each relay. Single side fusing of the power is associated
with the power input on JF1 pin 1. Return power path through JF1pin 3 is not fused.
Terminal board types TRLYH1E, 2E, 3E One 24 point, barrier type terminal blocks, removable, 1 or 3 I/O packs
per board
Item Specification
Maximum response time - off 0.3 ms for dc relays, 1/2 cycle for ac relays
GEI-100727D 19
For public disclosure
Type: 36 Mechanical Relays, 12 for Form A and B Outputs (option for fused branches)
Terminal board types TRLYH1F, 2F Two 24 point, barrier type terminal blocks, removable, 3 I/O packs per board
WPDFH1A Optional daughter board to TRLYH1F for 24/125 V dc, 115 V ac source with fuses
for field solenoid power
Terminal board sizes TRLY 17.8 cm wide x 33.02 cm high (7.0 x 13 in)
WPDF 10.16 cm wide x 33.02 cm high (4.0 x 13 in)
Item Specification
Number of relays & Contact TRLYH1F 36 relays that vote to create 12 form A (NO) contact outputs
configuration TRLYH2F 36 relays that vote to create 12 form B (NC) contact outputs
Item Specification
Item Specification
Redundancy The PPRF supports single I/O pack with single I/O Ethernet connection (no redundancy),
single I/O pack with dual I/O Ethernet connections, and hot-backup I/O pack with dual I/O
Ethernet connections (hot-backup redundancy is available with two PPRFH1A I/O packs. One
operates as the active master, and the second operates as a backup master in standby mode)
Transmit time Can be as fast as Mark VIe frame rate (up to 100 Hz)
Receive time Inputs are asynchrounous and scanned at 100Hz. System receive time is determined by:
Number of slaves
GEI-100727D 21
For public disclosure
I/O Pack PFFAH1A Physical
Amount of I/O
Number of slaves 500 inputs and 500 outputs, half Boolean and half analog, 10 ms frame rate
This is a requirement, not a hard limit.
RS485 Topology
Segment lengths 80 m
2-3 km
15 km at 12 MB Plastic
Multi-mode
Single-mode
Terminal board types SSCAH1A One 48 point, box type terminal block, not removable, 1 I/O pack per board
SSCAH2A One 48 point, box type terminal block, removable, 1 I/O pack per board
Terminal board sizes 10.2 cm wide x 15.9 cm high (4.0 x 6.25 in)
Item Specification
Cable distance, rate, and RS-232 Mode: up to 50 ft, 19,200 baud max, 1 drop
drops RS-422 Mode: up to 1,000 ft, 375 kbps max, 8 drops
RS-485 Mode: up to 1,000 ft, 375 kbps max, 8 drops
GEI-100727D 23
For public disclosure
1501 Roanoke Blvd.
Salem, VA 24153 USA
For public disclosure