Professional Documents
Culture Documents
CNT 0011824 02 PDF
CNT 0011824 02 PDF
CNT 0011824 02 PDF
/ Assembly Instructions
Canon is a registered trademark of Canon Inc. Canon Inc. Nobutaka Mukouyama
Assembly Instructions
http://www.canon.com/c-park/en/
Mountain fold
Valley fold
Cut line
Height: 54 to 62cm Weight: 25 to 34kg is considered ideal. Scissors, straightedge, glue (We recommend craft glue),
Origin: UK a round stick such as a pencil
Temperament: Warm and friendly. Very affectionate. (used for applying curvature to paper).
The Labrador Retriever is named after its original role as a 'retrieving' gun dog
and the Labrador peninsula in Canada.
Assembly tip
Some say that the ancestors of the breed were dogs who crossed over the
Atlantic from Europe to Canada on fishing boats sometime in the 16th century Crease all mountain folds and valley folds before gluing,
and were eventually brought back to Britain sometime in the 19th century.
and apply curvature to curved portions.
Originally rather fierce, the breed was improved to make it obedient and easy
to train.
The Labrador has an otter-like tail and loves to swim and play in the water.
They are loved by many as guide dogs for the blind, care dogs and rescue Caution
dogs and are also extremely popular as pets.
This Papercraft Labrador Retriever is about half the size of the real dog. Keep glue away from small children.
1
Labrador Retriever : Assembly directions Parts to assemble 1
Canon is a registered trademark of Canon Inc. Canon Inc. Nobutaka Mukouyama
Attach Curve
MUZZLE 1 NECK
MUZZLE 2 TAIL 1
2
Labrador Retriever : Assembly directions Parts to assemble 2
Canon is a registered trademark of Canon Inc. Canon Inc. Nobutaka Mukouyama
Attach Curve
3
Labrador Retriever : Assembly directions Parts to assemble 3
Canon is a registered trademark of Canon Inc. Canon Inc. Nobutaka Mukouyama
Attach Curve
Front
Back
Assembled parts Assembled parts
4
Labrador Retriever : Assembly directions Final assembly / Completed
Canon is a registered trademark of Canon Inc. Canon Inc. Nobutaka Mukouyama
Attach Curve
Final assembly Put the parts together in the order indicated by steps 1 through 20 below. BODY 1
EARS R EARS L
BELLY 1
1 Glue THIGH L to THIGH R. 9
2 Glue HIND LEG 2 to HIND LEG 1.
3 Glue HIND LEG 1 to THIGH.
19
19 8
4 Glue BELLY 2 to THIGH. MUZZLE 1 7 BELLY 2
18 13
5 Glue TAIL 1 to TAIL 2. 14 13
6 Glue BELLY 2 and THIGH to TAIL. TAIL 1
HEAD BANDANA
7 Glue BODY 1 to BODY 2. 17
15 6
8 Glue BELLY 1 to BELLY 2.
BODY 2 5
9 Glue BELLY 1 to BODY. MUZZLE 2 HIND LEG 1R
10
20
Glue FRONT LEGS 4 to FRONT LEGS 3. FRONT LEG 1L
11
FRONT LEG 1R 12 THIGH R 4 TAIL 2
Glue FRONT LEGS 3 to FRONT LEGS 2.
12 Glue FRONT LEGS 2 to FRONT LEGS 1. FRONT LEG 2R
12 3
13
16
Glue FRONT LEG 1 to BODY.
14 Glue NECK to BODY. 2
FRONT LEG 2L
15 Glue the ends of the BANDANA together.
11 1
16 Fit the BANDANA onto the neck.
17 Glue MUZZLE 1 to MUZZLE 2. NECK
FRONT LEG 3R
11 HIND LEG 2R 3
18 Glue MUZZLE to HEAD. HIND LEG 1L
10 FRONT LEG 3L
19 Glue EARS to HEAD. THIGH L
20
FRONT LEG 4R 10 2
Glue HEAD to NECK.
Complete photo