Professional Documents
Culture Documents
Rj900xe I 00
Rj900xe I 00
Rj900xe I 00
NOTE
zThe stands are optional depending on the 3333 Detaching protective materials
7 Activating the printer
product and regions. 8 Setting the display language
4 Installation
11 Loading the media
4444 Installation environment
11111 Loading the roll media
1111 Unpacking the stand box 4444 Installation procedure
8IFOVTJOHUIFQSJOUFSPOMZ
1 RJ900XE-I-00
RJ-900X series INSTALLATION MANUAL
1 Unpacking boxes 1 Confirming bundled items 111 Items in the attachment box
Procedures for unpacking boxes are explained1 After unpacking, please confirm that the product
This product is packaged separately, divided has not damaged and no components are miss-
into the printer and the stand1 ing1
CAUTION NOTE
Unpacking this product requires the zIf anyitems are damaged or missing, con-
following number of people1 tact MUTOH local dealer.
RJ-911X : Two or more
RJ-911X : Three or more
111 Items in the printer box
While taking out the printer from the box,
make sure to remove the vinyl sheet (1) RJ-911X
No1 Name Q'ty
1 Power cable 1
111 Unpacking printer box 2 Drivers and Manuals CD-ROM 1
(2) RJ-911X
3+9
3+9
RJ900XE-I-00 2
RJ-900X series INSTALLATION MANUAL
211 The stand assembling procedure
If you will use the stand, assemble it in accor-
dance with the following steps1 No1 Name No1 Name
1 Casters 2 Caster locks
No1 Name No1 Name
1 Right support 3 Caster section
2 Caster lock 4 Hexagon socket head
cap screws
222 Assemble the left side of the stand in a simi-
lar way to step 11
No1 Name No1 Name
1 Lerft support 3 Caster section
2 Caster lock 4 Hexagon socket head
cap screws
No1 Name
1 Butterfly bolts
3 RJ900XE-I-00
RJ-900X series INSTALLATION MANUAL
NOTE
z For temperature and humidity, avoid locations
such as the following1 There is a possibility G
that the print quality will be affected1 F
B C
Places where temperature or humidity may E
D
rapidly change, even though within the re-
quired conditions1 BNN
Place that receives direct sunlight or strong CNN
illumination light DNN
Place that receives direct wind from an air ENN
conditioner, and so on FNN
z To keep the temperature and humidity con- GNN
stant, install this product in a location where
the air condition is adjstable1
RJ900XE-I-00 4
RJ-900X series INSTALLATION MANUAL
No1 Name No1 Name
1 Casters 2 Caster locks
No1 Name
1 Rubber feet
5 RJ900XE-I-00
RJ-900X series INSTALLATION MANUAL
6 Turning the power ON/ 611 Turning the power OFF 7 Activating the printer
OFF Follow the procedure below to turn the printer OFF1 This product requires activation when the power
This section explains how to turn the printer is turned ON for the first time1
ON/OFF1 111 Verify the following regarding the opera-
tional condition of the printer1 When Activation required is displayed on
Printing or other operations are not in prog- Operation panel, follow the Printer activation
611 Turning the power ON
ress1 guide* and perform activation1
Follow the procedure below to turn the power Operation panel display is Normal1
ON1 *Download the Printer activation guide from
222 Press the [Power] key on Operation panel to the following ValueJet Club1
111 Press the [Power] key on Operation panel to turn OFF the printer1
turn ON the printer1 Power lamp on Operation panel turns OFF1 https://mbss1mutoh1co1jp/mutoh/guser/
Power lamp on Operation panel lights up in NOTE
blue1 zIf Operation panel is in the following status,
the power is ON1
The [Power] key is pressed in1
Power lamp is ON1
Press the key once again to turn the power
OFF1
NOTE
zAfter turning OFF the printer, wait for ten sec-
onds or longer to turn it ON again1
No1 Name
1 Media loading lever
RJ900XE-I-00 6
RJ-900X series INSTALLATION MANUAL
NOTE
zInsert the ink cartridge all the way to the end
of the slot1
zInsert all four ink cartridges1
zMake sure that the ink cartridges are inserted
into the correct slots1 Match the mark in front
of the slot and the color of the ink before in-
serting the ink cartridge1
Language: Japanese is displayed on Opera- zInk cartridges are structured to avoid wrong
tion panel1 insertion1If you cannot insert the ink cartridg-
es into the slot smoothly, you may be inserting
333 Press the [Enter] key1 it into a wrong slot1 Do not insert it forcefully1
Press the [+] key or [-] key on Operation panel
to select a setup item and press the [Enter]
key1
7 RJ900XE-I-00
RJ-900X series INSTALLATION MANUAL
555 Ink Refill ** min is displayed, and the ink 666 Turn ON the product1
starts the Initial ink charge1
11 Loading the media The product starts the initial operation1
It takes about 5 minutes1 In the initial opera- The operation panel displays Paper End1
tion, the product repeats ink filling and paus-
1111 Loading the roll media 777 Select Roll media by pressing [ ] key on
ing1
This section explains about how to load the roll media1 the operation panel1
Put the roll media in the center of the printer1 Roll media lamp lights up1
CAUTION
Follow the steps to load the media1
Comply strictly with the following dur-
ing ink filling1 111 When using roll media of three-inch di-
Do not turn the printer OFF1 ameter media tube, the optional three-inch
Do not unplug the power cord set of attachment should be used to the movable
the printer1 flange and fixed flange1
Do not open the front cover1
Do not open the maintenance cover1
Do not raise the media loading lever1
1111 Open the front cover, and pull out the roll
media1
No1 Name No1 Name
1 Movable flange 2 Roll media
555 Set the scroller onto the scroller receiver so
that the fixed flange heads for the ink car-
tridge side1
No1 Name No1 Name
1 Scroller 3 Ink cartridge slot
2 Fixed flange 4 Scroller receiver
RJ900XE-I-00 8
RJ-900X series INSTALLATION MANUAL
1111 Wind back the roll media with scroller while 1111 Wind back the roll media with scroller to 555 Open the front cover, and insert the sheet
pressing down the media edge, remove bend- remove bending and slant of the media1 media in to the media feed slot1
ing and slant of the media1
The media type is entered1
The operation panel displays Paper Initial ,
and media starts the initial operation1 No1 Name No1 Name
1 Media loading lever 2 Front cover
After finishing the media initial operation, the
operation panel displays Ready to Plot , and
the product turns to a normal operation1 888 In the same way as step 13 in 1111 Loading
No1 Name
the roll media, make the media type setting1
1 Media loading lever When the media type is entered, the operation
panel displays Paper Initial, and media starts
the initial operation1
After finishing the media initial operation, the
operation panel displays Ready to Plot, and
the product turns to a normal operation1
The media loading is complete1
9 RJ900XE-I-00
RJ-900X series INSTALLATION MANUAL
222 Check that Ready to Print is displayed on 222 Set the IP address for the printer1
Operation panel1
333 Press the [Menu] key on the operation panel1 NOTE
zFor the procedure to set IP addresses, refer to
777 If the nozzle check result indicates that the 31615 Setting IP Addresses in the Operation
checked points are blurred or missing, clean manual1
the head1 zYou can view the Operation manual from the
Press the [Cleaning] key on the operation CD-ROM ( Drivers and Manuals CD-ROM )
panel for at least 2 seconds1 included with the product1
The language preference screen is displayed
when you start the CD-ROM1Click the lan-
guage you want, and then click Viewing
the Operation manual on the next screen1
RJ900XE-I-00 10
RJ-900X series INSTALLATION MANUAL
777 Ensure that your PC boots up correctly, and 555 The installer starts up1
1111 For USB connection
insert the CD-ROM on which Windows
printer driver is written into the CD-ROM This section explains how to connect USB device1
drive on your PC1
The language preference screen is displayed1 NOTE
888 Click the language you want to use1 z Do not connect the USB cable before install-
ing the printer driver1Otherwise the driver
cannot be installed correctly1
z If you have connected the USB cable first by
mistake, check 6111111 If You Connect USB
before Installing Driver 1
NOTE
111 Turn ON the power to the PC1 zFor details about installing, refer to 31713
Installing the printer driver (for USB connec-
222 Ensure that your PC boots up correctly, and tion) on the Operation manual1
insert the CD-ROM on which Windows zYou can view the Operation manual from the
printer driver is written into the CD-ROM CD-ROM ( Drivers and Manuals CD-ROM )
999 Click Install the printer driver on the next drive on your PC1 included with the product1
screen1 The language preference screen is displayed1 The language preference screen is displayed
when you start the CD-ROM1Click the lan-
guage you want, and then click Viewing
333 Click the language you want to use1 the Operation manual on the next screen1
No1 Name No1 Name
1 USB cable 2 USB connector
NOTE
z For the details of installation, refer to 31712 In-
stallation procedure of the printer driver (net-
work connection) in the Operation manual1
No1 Name No1 Name
1 USB cable 2 Cable clamp
11 RJ900XE-I-00
12 Printer driver 14 Product Activation Guide
Printer driver is used to print and output the This product includes the following manuals1
print data created with Windows application
software to the printer1 Installation Manual (this manual)
This manual explains the procedures of
1211 Setting the printer driver
unpacking, installing, and basic set up1
Follow the procedure below to configure the fol-
lowing items1 Product Activation Guide
111 Selecting the printer driver This manual explains the operation procedure
222 Setting the printer driver when you start the printer for the first time1
https://mbss1mutoh1co1jp/mutoh/guser/
MUTOH INDUSTRIES LTD. MUTOH AMERICA INC. MUTOH BELGIUM nv MUTOH DEUTSCHLAND GmbH
Tel.:81-(0)3-6758-7020 Tel.:1-480-968-7772 Tel.:32-(0)59-561400 Tel.:49-(0)211-385474-0
Fax:81-(0)3-6758-7025 Fax:1-480-968-7990 Fax:32-(0)59-807117 Fax:49-(0)211-385474-74
E-mail:ibd@mutoh.co.jp E-mail:sales@mutoh.com E-mail:mutoh@mutoh.be E-mail:vertrieb@mutoh-gmbh.de
http://www.mutoh.co.jp/en/ http://www.mutoh.com http://www.mutoh.be http://www.mutoh.de
index.html
MUTOH North Europe S.A. MUTOH HONGKONG LTD. MUTOH SINGAPORE PTE.LTD. MUTOH AUSTRALIA PTY.LTD.
Tel.:352-445-906 Tel.:852-2377-3411 Tel.:65-6325-3150 Tel.:61-2-9437-1336
Fax:352-447-093 Fax:852-2377-3422 Fax:65-6220-4342 Fax:61-2-9436-2871
E-mail:info@segroup.lu http://www.mutoh.co.jp/ E-mail:sales_inq@mutoh-sg.com E-mail:sales@mutoh-au.com
http://www.segroup.lu/ en/index.html http://www.mutoh.co.jp/en/ http://mutoh-au.com
index.html