Professional Documents
Culture Documents
ZXMW SR10 S340 (V2.0) Software Upgrade Guide
ZXMW SR10 S340 (V2.0) Software Upgrade Guide
0)
Software Upgrade Guide
ZXMW SR10 S340 (V2.0) Software Upgrade Guide Internal Use Only
LEGAL INFORMATION
By accepting this certain document of ZTE CORPORATION you agree to the following terms. If you
do not agree to the following terms, please notice that you are not allowed to use this document.
Copyright 2017 ZTE CORPORATION. Any rights not expressly granted herein are reserved. This
document contains proprietary information of ZTE CORPORATION. Any reproduction, transfer,
distribution, use or disclosure of this document or any portion of this document, in any form by any
means, without the prior written consent of ZTE CORPORATION is prohibited.
and are registered trademarks of ZTE CORPORATION. ZTEs company name, logo
and product names referenced herein are either trademarks or registered trademarks of ZTE
CORPORATION. Other product and company names mentioned herein may be trademarks or trade
names of their respective owners. Without the prior written consent of ZTE CORPORATION or the
third party owner thereof, anyones access to this document should not be construed as granting,
by implication, estopped or otherwise, any license or right to use any marks appearing in the
document.
The design of this product complies with requirements of environmental protection and personal
security. This product shall be stored, used or discarded in accordance with product manual,
relevant contract or laws and regulations in relevant country (countries).
ZTE CORPORATION
Address: NO. 55
Hi-tech Road South
ShenZhen
P.R.China
518057
Website: http://dms.zte.com.cn
Email: TSM.Aftersales@zte.com.cn
Revision History
Author
Prepared
Date Document Version Reviewed by Approved by
by
2010-12-30 1.0 Sun Tao Yan Xuedong Guo Chaohong
Proposal: Before reading this document, you had better have the following
knowledge and skills.
SEQ Knowledge and skills Reference material
Be familiar with the operation and
1 maintenance of ZXMW SR10 S340 (V2.0) User manuals
equipments
Handle the basic knowledge of microwave
2
transmission and equipments
3
Follow-up document: After reading this document, you may need the following
information
SEQ Reference material Information
1
2
3
ZTE Confidential Proprietary 2017 ZTE CORPORATION. All rights reserved. III
ZXMW SR10 S340 (V2.0) Software Upgrade Guide Internal Use Only
TABLE OF CONTENTS
1 Upgrade Preparation 8
1.1 Application Range 8
1.2 Tools Preparation 8
1.3 Notes 8
2 Upgrade Procedure 9
2.1 Obtain S340 IP address 9
2.1.1 Install USB Driver 9
2.1.2 Obtain IDU IP Address 12
2.2 FTP Server Setting 17
2.3 1+0 Software Upgrade 25
2.4 1+1 Protection Software Upgrade 32
2.5 N+0 Software Upgrade 33
FIGURES
1 Upgrade Preparation
Tip:
2. Acquire and backup complete MW Link config data of whole net, including
longitude and latitude, location and linkman, IP address, modulation mode,
capacity, bandwidth, frequency, Tx power, Rx level, alarm and etc.
3. Prepare emergency solution, check link status before upgrade, record necessary
KPI and alarm. If there is link with problem such as low Rx level, serious alarm and
etc., make timely report and judge if it is ready to be upgraded or not.
2 Upgrade Procedure
2. After connection, if the cable driver hasnt been installed on the PC computer,
select [Install from a list or a specific location (Advanced)] and window of Figure
Upgrade Procedure-1will be displayed.
(4) Click button <Next> to install the software as in Figure Upgrade Procedure-3.
i. Right click [My Computer] on the desktop, select [Manage] in the menu and
there displays the window as in Figure Upgrade Procedure-5.
3. Enter <a> in [Name], click [OK], and there displays the window as in Figure
Upgrade Procedure-8.
Note:
4. Select <COM6> for [Connect using] , and click <OK> and there displays the
window as in Figure Upgrade Procedure-9.
vi. Click button <Ok> and there displays the window as in Figure Upgrade
Procedure-10.
6. Enter the username <admin> behind [IP-10 login], press Enter and input <admin>
behind [Password].
Tip:
After IP address is obtained, create new lock link in PC to make it in the same net with IDU.
2. Clilck button I agree , and then the window as shown in Figure Upgrade
Procedure-13 pop-ups. Select Standard as the type of install.
3. Click button Next, and then the window of Figure Upgrade Procedure-14 pop-
ups to select Destination Folder.
4. Click button Next, and then the window shown in Figure Upgrade Procedure-
15 pop-ups. In this window, choose how FileZilla Server should be started. The
choice is the default Install as service, started with Windows (default) .
the selection about port is also the default14147.
Figure Upgrade Procedure-15 Settings of the start type and listening port of FileZilla
Server
apply to all users (default) in Drop-down box. There is no need to select the
choice about whether start interface after installation.
Figure Upgrade Procedure-16 Settings about start type of FileZilla Server interface
6. Click button Next and The window as shown in Figure Upgrade Procedure-17
is displayed. The installation process begins.
10. Click button Add in group box of Caption Users , the dialog shown in
Figure Upgrade Procedure-21 pop-ups to add new user. In this example, zteis
input.
11. Input User Name and Click button OK . In the window of Figure Upgrade
Procedure-22 , click the choice in the front of caption password , input the
password of the user. In this example, the password of User zte is zte.
12. Click Shared folders in left navigation tree, the page is displayed as shown in
Figure Upgrade Procedure-23.
13. Click button Add in group box of Shared folders, and then Browse for Folder
window pop-ups. Add FTP directory path to the Server, the page is shown in
Figure Upgrade Procedure-24. In this example, the path is set to be C:\update.
Note:
Tectory path in FTP Servehe dirr should be set to the final layer directory. In this example,
software files are stored in C:\update. So, the path should be C:\update.
14. Click button Confirm , the page shown in Figure Upgrade Procedure-25 is
displayed. Click checked window of Read , Write , Delete under
CaptionFiles. Finally, click button OK, setting is completed.
Note:
Suggest set FTP share holders under root drive. Name the folder in English.
15. Set FTP Server and unzip upgrade package. Copy all files of unzipped package to
the shared folder address of FileZilla Server. The page is shown in Figure Upgrade
Procedure-26.
1. Open the browser and input IP address of S340. The login page as shown in Figure
Upgrade Procedure-27 is displayed. Input User Name and password like that set in
the equipment. In this paper, User Name is admin and Password is admin.
4. Click FTP Parameters in this page and the window of Figure Upgrade
Procedure-30 pop-ups. According to captions of input box, input relevant
information. click Apply and Refresh. In this example, input c:\update
in the first box , user name and password are zte because c:\update is set
to be the path in FTP Server.
Note:
5. After setting FTP parameters, click button Download under New Versions,
and then system downloads software from FTP server. The FTP software interface
displays of Figure Upgrade Procedure-31 to present connection success.
8. Download completes and then the FTP Server is disconnected with the equipment.
The page is shown in Figure Upgrade Procedure-34.
10. After software download, click Upgrade and software upgrade begins. During
upgrade, Install statuscolumn displays In progress. The page is shown in
Figure Upgrade Procedure-36
11. Click file icon behind Install status column, situations of software
installation are displayed in Figure Upgrade Procedure-37.
13. Software installation succeeds, and then the IDU resets. Login the equipment to
check software version. The version information is displayed as shown in Figure
Upgrade Procedure-39.
2. Click Open Mate , login the standby IDU. In left navigation tree,Click
ConfigurationGeneralProtection sequentially to check protection
information of the equipment. The page is shown in Figure Upgrade Procedure-41.
3. Confirm the status of main and standby IDU. According to upgrade method
mentioned in section 2.3, upgrade software of main IDU.
4. Due to upgrade success of main IDU, the equipment resets. Standby IDU becomes
main IDU. According to upgrade method mentioned in section 2.3, upgrade
software of the IDU.
3. Click FTP Parameters in this page and the window as shown in pop-up.
According to captions of input box, input relevant information. click Apply and
Refresh. In this example, input c:\update on the first line, user name and
password are zte because c:\update is the path in FTP Server.
7. Click button Upgrade All , and then software upgrade begins. Install
statuscolumns of all slots display In progress . The page is shown in Figure
Upgrade Procedure-48.
Note:
9. Software Upgrade of slot 2 completes. the IDU resets, and then Install
statuscolumn displays N/A. Software Upgrades of slot 1,3 are in progress.
The page is shown in Figure Upgrade Procedure-50.
Note:
The sequence of N+0 Software Upgrade is from top to bottom. The sequence of which slot
equipment will complete upgrade in slot 2,3 is uncertain.
10. Software Upgrade of Slot 3 IDU completes, and then IDU resets. The page is
shown in Figure Upgrade Procedure-51.
11. Software Upgrade of Slot 1 IDU completes, and then IDU resets. Software upgrade
of shelf succeeds. The details are shown in Figure Upgrade Procedure-52.
3.1 Downgrade
Downgrade is opposite to upgrade. The running software version could be changed from
higher one to lower one by downgrade. There are upgrade and downgrade packages in
every published software package. For 6.6.2 software, upgrade package is used to
upgrade from lower version to 6.6.2 and downgrade package is used to downgrade from
higher version to 6.6.2.
The operation of downgrade is the same with that of upgrade. The function region of
download and downgrade is in Old Version part as shown in Figure Downgrade &
Rollback-53.
3.2 Rollback
The software version can go back to the version before software by the rollback
operation. Rollback is not aimed at downgrade but the last upgrade operation.
For example, the running version of a S340 is 2.8.25. After twice upgrades, its versions
are 2.8.31 and 2.8.35. Through downgrade, the version is 2.8.32. the version isnt 2.8.31
but 2.8.35 by rollback. The details are displayed in Figure Downgrade & Rollback-54.
Due to this, rollback operations are aimed at last upgrade operation.
Take rollback of 1+0 equipments as an example. The specific steps are as follows:
2. Click button Rollback in software management page, and then rollback begins.
In progress is displayed in Install statuscolumn. All details are shown in
Figure Downgrade & Rollback-56.
3. Click the file icon . check the situation of rollback in View log as shown in
Figure Downgrade & Rollback-57.