Professional Documents
Culture Documents
Questions On Advanced Concrete Structures
Questions On Advanced Concrete Structures
Q1) What are the guidelines for predicting the yield lines and axes of rotation?
Explain with suitable sketches the possible yield line patterns for different
shapes of slabs.
Q.3 The triangular slab ABC shown in figure.1 is simply supported about edges
AB and BC and is isotropically reinforced with 10mmdia bars with 200mm
c/c spacing .The average effective depth of the slab is 125 mm. Determine
the live load it can carry if the finishing load is 0.8kN/m2 .Use M-20
Concrete and Fe-415 Steel.
Q5) An RC grid roof is to be designed to cover an area of 12mx16m the spacing of rib in
mutually perpendicular directions being 2m c/c live load 1.5kN/m2. Adopt M20 concrete
and Fe 415 grade HYSD bars. Analyse the grid floor by Rankine Grashoff method and
design suitable reinforcement in the rib and slab.
Q6) Design an interior panel of a flat slab of size 5m x 5 m without providing drops and column
heads. Size of column is 500x500 and live load is 4 kN/m2. Take floor finish 1 kN/m2
Use M20 conc and Fe 415 steel.
Q7) Design an Exterior panel of a flat slab floor system for a warehouse 24mx24m divided into
panels of 6m x6m.
LL 5 kN/m2
FF 0.75 kN/m2
Height of storey 3 m
Q8) Design side walls and hopper bottom of a rectangular bunker of capacity 300 kN to store
coal using M20 concrete and Fe 415 steel.
Q8) Solve unsolved problem any one from the book attached for elevated water tank.
(Krishna raju)
Solve any two questions each from module 7 and module 8 from PC Vargees and Punmia