Professional Documents
Culture Documents
ORLENOIL Folder Przemyslowy en 2014
ORLENOIL Folder Przemyslowy en 2014
PRODUCT CATALOGUE
Orlen Oil was established in 1998, as a collective undertaking of the largest Polish
producers of lubricants, Petrochemia Pock, Rafineria Trzebinia, Rafineria Czecho-
wice and Rafineria Jedlicze.
Currently, ORLEN OIL operates as a part of the Capital Group of Polski Koncern HYDRAULIC FLUIDS OILS FOR LUBRICATING CHAINS OILS FOR VARIOUS APPLICATIONS
Naftowy ORLEN S.A., one of the largest petroleum corporations in the Central-East HYDROL EXTRA L-HV 02 PILAROL EKO 32 EXPLOIL 60
Europe. HYDROL ARCTIC L-HV 32 02 PILAROL (Z) 32 KALIBROL LUX 60
ORLEN OIL is a leading producer and distributor of automotive, agricultural and in- HYDROL PREMIUM L-HV 03 ITERM 30 MF 33 HEATING MEDIA
dustrial lubricants. With its wide range of products, ORLEN OIL meets expectations HYDROL PREMIUM L-HM 03 OIL FOR PNEUMATICS ITERM 6 MB 61
HYDROL L-HV 04 PNEUMATIC VG 32, VG 100 34 ITERM 100 61
of both individual and corporate customers.
HYDROL SPECIAL 04 ELECTRICAL INSULATING OIL ALUMINIUM GREASES
Our research and development efforts together with effective marketing activities HYDROL L-HM/HLP 05 ORLEN OIL TRAFO EN 35 ALITEN EP 62
have contributed to the success of PLATINUM - a range of top quality engine oils. HYDROL HLPD 06 TURBINE OILS LITHIUM GREASES
ORLEN OIL is also the leader in the Polish market for industrial lubricants. HYDROL BIO HEES 32 06 TURBINEX TG PREMIUM 36 LITEN NANO 63
We focus on comprehensive lubrication solutions and consultancy services. In order HYDROL BIO HETG 46 07 TURBINEX TG 36 SMAROL NANO FOR MOWERS 63
to immediately adjust the offer to increasing quality standards in the market, the HYDROL L-HL 07 TURBINEX TU 37 GREASEN SYNTEX HT 2 64
ORLEN OIL H-515 08 TURBINEX BIO 37 GREASEN COMPLEX 2 64
company is always ahead of technical trends.
HYDRAULIC - GEAR OILS TU TURBINE OILS 38 LITEN PREMIUM T-4EP 65
Products offered by ORLEN OIL meet the requirements of strict international stand- LITEN T-4 65
TRANSOL V32 09 T-20, T-30 TURBINE OIL 38
ards. All production processes are controlled by the Quality Management System GALKOP 10 EMULSIFYING OILS FOR MACHINING LITEN T-4P 66
according to ISO 9001:2008 and ISO 14001:2004. HYDRAULIC FLUIDS FOR MINING AQUASYN HD 39 LITEN EPX 66
ORLEN OIL is certified for conformance with the requirements of AQAP 2110:2009 INDUSTRY UNICOOL MIKRO EP 39 LITEN EP 67
System. HYDROKOP SYNTHETIC 11 UNICOOL MIKRO 40 GREASEN T 4S-2, 4S-3 67
HYDROKOP SEMISYNTHETIC 11 UNICOOL MIKRO E 40 GREASEN EP-23 68
HYDROKOP MINERALNY 12 UNICOOL WO 41 LITHIUM-CALCIUM GREASES
KONHYDR T 12 MIKROCUT 41 LITEN LC EP 69
NON-FLAMMABLE HYDRAULIC FLUIDS EMULGOL ES-12 42 SMAROL UNIVERSAL ECO 70
HYDRO FLUID HFC-46 13 EMULGOL DS 30 42 GREASEN N-EP 00/000 71
GEAR OILS NON-EMULSIFYING OILS FOR GREASEN S-EP 00/000 71
TRANSGEAR PAG 14 MACHINING CALCIUM GREASES
TRANSGEAR PE 14 FREZOL HC 800 43 MACHINE GREASE 2, 3 72
TRANSOL SP 15 FREZOL EPX 43 KALTON EP 72
TRANSOL CLP 15 FREZOL 44 CSW ROLLING MACHINES GREASE 73
TRANSOL 16 GRIND HC 315 44 GREASE FOR L, Z BRAKING MECHANISMS 73
OILS FOR AIR AND GAS COMPRESSORS SULFOFREZOL 45 GREASEN STP 74
CORALIA PAG 46 17 ACP-E 45 GREASEN GRAFIT 74
CORALIA PE 46, 68 17 SM MACHINING OIL 46 SPECIAL GREASES
CORALIA T 46 18 HONOL D, BQ 46 KZE GREASE FOR TOOTHED GEARS 75
CORALIA VDL 18 ORLEN OIL EDR 3 47 KZ GREASE FOR TOOTHED GEARS 75
CORALIA L-DAB 19 OILS FOR HARDENING LR CABLE GREASE 76
CORALIA L-DAA 19 HARTEX 70S, 70, 120, 160 48 CALCIUM SULPHONATE BASED GREASES
CORALIA VACUUM 20 OH-70, OH-120M, OH-160M 48 HUTPLEX EP- 2 77
OILS FOR REFRIGERATING OILS FOR PLASTIC WORKING HUTPLEX HV, WR-1, WR-2 77
COMPRESSORS PRESSOL PT 49 BENTONITE GREASES
FRIGOL WZ 21 PRESSOL B 49 BENTOMOS 23 78
FRIGOL TZ 21 OP-35 50 BENTOR 2 78
Implementing in new technologies, both in the automotive and industrial sectors, FRIGOL M 22 L STAMPING OIL 50 BIODEGRADABLE GREASE
is a factor that forces the lubricant suppliers to develop products in order to meet MACHINE OILS OIL FOR VERY DEEP STAMPING 51 UNITEX 00, 1 79
the highest quality requirements. L-AN 23 OILS FOR MOULDS SOLVENTS AND KEROSENE
The collaboration with worldwide additives suppliers involves also the basic and L-AN Z 23 KONKRETON L (Z) 52 ACETONE 80
VELOL 24 KONKRETON LA (Z) 52 PHARMACEUTICAL PETROL 80
application tests and research into new technologies for the industrial oils and lu-
VELOL RC 24 KONKRETON V, VS, L, N, NH, P, S, XS 53 III LOW AROMATIC EXTRACTION
bricants. While developing new product know-how, ORLEN OIL collaborates also NAPHTHA 80
MN GREASED MACHINE OILS 25 FORMEX Q 53
with leading national scientific institutions, such as the Oil and Gas Institute in Kra- NP CIRCULATING OILS 25 B0 ANTI-ADHESION OIL 54 PAINTER'S NAPHTHA 80
kow, the Institute for Fuels and Renewable Energy in Warsaw and AGH University of CYLINDER OILS 26 BQ OIL FOR CERAMICS 54 EXTRACTION THINNER 80
Science and Technology of Krakow. AXLE OILS 26 CERAMOL Q 55 BROAD HEXANE FRACTION 80
Top quality of products and services is the priority of ORLEN OIL's mission. SP WASHABLE OIL 27 SEPARATION OIL 55 DENATURATED ALCOHOL 81
Our objective is to fully meet our customers' demands by producing and delivering UNIDOM WHITE MACHINE OIL 25 MAINTENANCE OILS LIGHTING KEROSEN 81
ORLEN OIL MP 150, 220 28 ANTYKOL NQ 56 CLEANING KEROSEN 81
products and services which meet their requirements regarding quality, environ-
LOCOMOTIVE OILS ANTYKOL 100 S 56
mental as well as health and safety regulations. LOKOMOTIV EXTRA CF 40 29 ANTYKOL TS 120 57
Superior quality of ORLEN OIL products is confirmed by the approvals of renowned LOKOMOTIV PREMIUM CD 40 29 AKORINOL T 57
automotive industry sector enterprises/businesses/firms (such as Mercedes- SPECIAL INDUSTRIAL OILS AKORINOL NQ 58
Benz, MAN, Renault, BMW, Volkswagen, Volvo, Daimler AG) and industrial equip- P-10, ... P-100 OILS 30 AKORINOL L-5Q 58
ment manufacturers (Flender, Denison Hydraulics, Siemens, Cincinnati Machine). OIL FOR VARIOUS APPLICATIONS H-1 31 LUBKORIN WAX 59
The implemented Quality Management System has created grounds for improve-
ment of the processes and their continuous development. It has also contributed
to the enhancement of the organisation management, also in terms of compliance
with legal requirements, which ensures flexible and quick response to the needs of
www.orlenoil.com the market and clients.
ISO VG viscosity grade 32 46 68 kinematic viscosity at 40C mm2/s 14.2 23.4 33.9 45.5 66.9 97.3 141.4
kinematic viscosity at 40C mm2/s 32.7 45.3 66.0 viscosity index - 153 152 150 148 146 146 145
viscosity index - 151 150 150 pour point C -39 -37 -36 -34 -30 -28 -23
pour point C -42 -39 -39 flash point C 191 195 202 210 221 233 241
kinematic viscosity at 40C mm2/s 33.6 kinematic viscosity at 40C mm2/s 14.7 22.8 32.4 44.5 67.2 97.5 143.8
viscosity index - 254 viscosity index - 102 102 102 102 102 96 96
pour point C -55 pour point C -34 -33 -28 -27 -26 -21 -18
flash point C 154 flash point C 180 195 210 212 224 230 239
pour point C -40 -40 -39 -32 -34 -30 -30 -28 viscosity index - 101 102 102 103 103 99 93 93
flash point C 165 178 192 205 210 226 232 239 pour point C -36 -35 -35 -34 -30 -30 -25 -22
resistance to foaming - 40/0 30/0 25/0 20/0 20/0 20/0 20/0 20/0 flash point C
sequence 1 ml 162 180 195 215 227 228 245 248
resistance to foaming -
sequence 1 ml 50/0 50/0 50/0 30/0 30/0 30/0 20/0 20/0
resistance to foaming -
sequence 1 ml 20/0
sequence 2 30/0
sequence 3 20/0
kinematic viscosity at 40C mm2/s 23.0 33.5 45.3 66.8 kinematic viscosity
at temperature of 100C mm2/s 6.80
viscosity index - 110 102 102 99 at temperature of 40C 46.7
flash point C 217 217 225 232 rust prevention rating 0-A
Requirements for 0.5% water-oil emulsion prepared on the reference water type V
emulsion pH 8.5
0,5% water and oil emulsion made of Hydrokop Mineralny concentrate with V type reference water
emulsion pH 8
stabilno
stability at w temperaturze
60C for 24h 70C w ciagu 24h pass
freezing C -35
ISO VG viscosity grade 150 220 320 460 PARAMETERS UNITS TYPICAL VALUES
kinematic viscosity at 40C mm2/s 150 237 325 433 ISO VG viscosity grade 68 100 150 220 320 460 680 1000
viscosity index 195 177 196 220 kinematic viscosity at 40C mm2/s 66 98 152 223 320 446 650 980
pour point C -30 -30 -30 -28 viscosity index - 102 100 99 98 98 95 94 94
flash point C 191 231 225 225 pour point C -28 -24 -23 -23 -20 -18 -15 -12
kinematic viscosity at 40C mm2/s 152 220 330 450 690 PHYSICAL AND CHEMICAL PROPERTIES:
viscosity index 147 149 153 150 148 PARAMETERS UNITS TYPICAL VALUES
APPLICATIONS:
The synthetic CORALIA PE 46 and 68 oils are designed for the lubrication of:
rotary vane air compressors
various types of screw air compressors (e.g., portable compressors that are used in construction, railways indu-
stry, etc.
kinematic viscosity at 40C mm2/s 43.1 kinematic viscosity at 40C mm2/s 30.6 42.9 65.2 96 147
demulsibility at 54C min. 10 pour point C -18 -18 -14 -14 -11
oxidation stability RBOT min. > 500 flash point C 220 224 240 246 250
ISO VG viscosity grade 32 46 68 100 ISO VG viscosity grade 32 46 68 100 150 220/320
kinematic viscosity at 40C 31.1 44.8 66.1 94.9 kinematic viscosity at 40C mm2/s 33.8 42.3 70.5 94.9 155 19.8 (at 100C)
mm2/s
kinematic viscosity at 100C 5.2 6.5 8.3 10.4
viscosity index - 95 95 92 90 90 90
pour point C -10 -9 -9 -9
pour point C -15 -14 -12 -12 -10 -13
flash point C 214 225 230 246
flash point C 218 223 230 238 240 245
acid number mg KOH/g 0.23 0.22 0.22 0.22
ash residue % (m/m) 0.005 0.005 0.01 0.015 0.018 0.008
resistance to oxidation,
carbon residue % (m/m) 0.011 0.012 0.018 0.021
kinematic viscosity at 40C mm2/s 99.0 kinematic viscosity at 40C mm2/s 13.4
MACHINE OILS
FRIGOL M 68 GENERAL DESCRIPTION:
FRIGOL M 68 oils for refrigerating compressors are made based on selected mineral base oils. They are characterised
by low pour point, good thermal stability and wear protection of working surfaces. L-AN GENERAL DESCRIPTION:
L-AN machine oils are produced from selectively refined oil distillates sourced from petroleum processing. Due to their
high solidification point, in winter L-AN machine oils should be used for lubrication of devices operating in heated
APPLICATIONS:
areas.
FRIGOL M oils are intended to lubricate all types of CFC refrigerating compressors operating with CFC coolants (e.g.
R12), HCFC coolants (e.g. R22) and ammonia. VISCOSITY GRADE:
APPLICATIONS:
ISO VG: 10, 15, 22, 32, 46, 68, 100, 150
L-AN machine oils are intended to lubricate light-duty and medium-duty machine elements and industrial equip-
APPROVALS:
ment:
L-AN 46 TOP PORBA
rolling and slide bearings,
L-AN 68 FUM PORBA
guides,
mechanical gears,
spindles, etc. and auxiliary friction nodes. Some L-AN machine oils are also applied for other purposes, e.g. hy-
draulic systems filling.
kinematic viscosity at 40C mm2/s 10.2 15.2 22.4 33.6 43.9 69.3 98.9 148.2
flash point C 200
viscosity index - 98 97 97 96 94 94 93 90
pour point C -34
kinematic viscosity at 40C mm2/s 9.7 14.8 22.7 32.6 45.0 67.1 101.6
viscosity index - 97 97 96 96 95 94 94
kinematic viscosity at 20C mm2/s 10.7 19.5 kinematic viscosity at 50C mm2/s 81.5 109.3
viscosity index 98 97 97
weld load daN 200 200 200
kinematic viscosity at 40C mm2/s 340 610 1000 solidification point C -20
kinematic viscosity at 100C mm2/s 30.8 40.6 46.0 flash point C 225
corrosion protection on Cu
plates, 3h/120C - 1 1
kinematic viscosity at 40C mm2/s 10.2 15.2 22.4 33.6 43.9 69.3 98.5 solidification point C -16
APPLICATIONS:
PILAROL EKO is a quality oil used for lubricating cutting system (chain) and mechanical saw guides used in forestry,
horticulture, etc. It also may be used for lubrication of other machines used in felling trees.
kinematic viscosity at 40C mm2/s 63.1 kinematic viscosity at 100C mm2/s 38.2
APPLICATIONS:
PILAROL (Z) is used for lubricating cutting systems (chain) and mechanical saw guides used in forestry, horticulture,
etc. It also may be used for lubrication of other machines used in felling trees.
viscosity index 95
kinematic viscosity at 40C mm2/s 31.2 101 kinematic viscosity at 40C mm2/s 10.0
breakdown voltage kV 62
TURBINE OILS
TURBINEX TG GENERAL DESCRIPTION: TURBINEX TU GENERAL DESCRIPTION:
The turbine oil TU TURBINEX is made from high-quality, selected, hydro-treated base oils. It contains innovative opti-
High quality turbine oils TURBINEX TG PREMIUM with superior thermooxidative stability are made with high quality
PREMIUM hydrocracked base oils group III. Oils contain a carefully balanced innovative additives such as antioxidants, corrosion 32, 46, 68 mally selected enriching additives such as antioxidants, corrosion inhibitors, non-ferrous metals passivators and EP
inhibitors, non-ferrous metals deactivators and extreme pressure additives. With the unique properties oils provide additives. Thanks to the outstanding performance characteristics it provides extended change intervals, it reduces
extended drain intervals, reduce downtime, maintenance costs and preservations of turbine systems, and reduce downtime, the cost of repair and maintenance of hydraulic systems, and limits the number of breakdowns. It provides
VISCOSITY GRADE: VISCOSITY GRADE: very good filterability even in systems contaminated with small amounts of water. The oil has the approval of the
failures. Unique designed oils formulation also provides lubrication of combined cycle system turbines. They provide
ISO VG: 32, 46 ISO VG: 32, 46, 68 world's leading turbine manufacturers. Characterized by good ability of air release, very high resistance to oxidation,
very good filterability even in systems contaminated with small amounts of water. Oils meet the requirements of the
QUALITY CLASS: QUALITY CLASS: a very good filterability, very good anti-corrosion and anti-rust properties, very good antiwear properties, excellent
world's leading turbine manufacturers. Characterized by high air release properties, very high resistance to oxidation,
ISO L-TSB, L-TGSB, L-TGF, L-TGSE ISO L-TSA, L-TGA, L-TSE, L-TGE resistance to emulsification and foaming.
high resistance to sludge and deposit formation, very good filterability, very good corrosion properties, very good
NORMS, APPROVALS, SPECIFICATIONS: NORMS, APPROVALS, SPECIFICATIONS:
antiwear properties, very good resistance to emulsification and foaming.
DIN 51515 p.1; DIN 51515 p.2, DIN 51515 part 1, APPLICATIONS:
ISO 8068, ISO 8068 The TU TURBINEX turbine oils are primarily used to lubricate and cool the bearings in gas and steam turbines, also
APPLICATIONS:
Siemens 901304, Siemens 901305 Approvals VG 32, 46 fitted with toothed gears. The oils can be used in normally used gas turbines under normal operating conditions. They
Turbine oils TURBINEX TG PREMIUM are used primarily for the lubrication and cooling of bearings of gas and steam
MEETS REQUIREMENTS: Siemens 901304 (VG 32, 46) can also be used as hydraulic fluids in the turbine control systems and for lubricating, among others, turbochargers in
turbines, gas-steam combined cycle turbines CCGT, also equipped with gears. Oils designed for turbine systems whe-
Alstom HTGD 90117, Skoda Power, Skoda Power (VG 32, 46) marine main and auxiliary engines, driven by exhaust gas. In the machine circulating systems requiring oils of quality
re are elevated work temperatures and pressures. They can also be used as hydraulic fluids in the turbine control sys-
GEK 32568f, BS 489 Alstom HTGD 90117 (VG 32) turbine oils, such as turbochargers, turbine pumps.
tems and for lubricating marine turbochargers of main and auxiliary engines powered by exhaust gases. In machine
circulating systems requiring turbine oils quality oils, such as turbochargers, turbine pumps.
PHYSICAL AND CHEMICAL PROPERTIES:
PHYSICAL AND CHEMICAL PROPERTIES:
PARAMETERS UNITS TYPICAL VALUES
PARAMETERS UNITS TYPICAL VALUES
32 46
32 46 68
kinematic viscosity at 40C mm2/s 31.6 43.6
kinematic viscosity at 40C mm2/s 32,6 44.6 65.3
viscosity index - 133 132
viscosity index - 96 96 95
pour point C -18 -12
pour point C -14 -11 -9
demulsibility at 54C min 5 10
demulsibility at 54C min 5 10 15
test RPVOT min > 2000
test RPVOT min > 750 > 750 ability to transfer loads - 10
at the FZG A/8.3/90, pass
CONCENTRATE
appearance homogeneous, clear brown liquid
3% SOLUTION IN WATER
kinematic viscosity at 40C mm2/s 31.5 42.0 72.4 pH - 9.5
HARDNESS 15N
emulsion stability in time - pass
viscosity index - 99 96 94 24h/20C
TURBINE OIL resistance to emulsifying and oxidation. Certified by the National Hygienic Institute. APPLICATIONS:
UNICOOL MIKRO EP is intended primarily for use in heavy-duty machining processes and grinding of steel, cast-iron,
Recommended operating concentrations:
APPLICATIONS: grinding 35%, non-ferrous metals or for machining of very hard materials e.g. alloy steels, nimonic. It may also be used for machining
MEETS REQUIREMENTS: normal machining 35%, aluminium alloys. High load resistance of emulsion film, strengthened by EP additives, allows excellent performance in
T-20 and T-30 turbine oils are mainly applied for:
ZN-66/MPCh/NF-104 heavy-duty machining. Good emulsion dispersion and its moistening properties allow easy reduction of friction and
circulating lubrication of steam turbine bearings, heavy-duty machining 58%.
removal of heat from the machining area, providing cleanness in the working environment.
lubrication of turbine sets with toothed gears, in case of a common oil circuit, APPROVALS:
lubrication of water turbines. HACO GROUP
CONCENTRATE
PHYSICAL AND CHEMICAL PROPERTIES: mineral oil content % approximately 35
kinematic viscosity at 50C mm2/s 22.4 32.0 appearance - transparent to opalescent fluid
CONCENTRATE
appearance at temp. 205C homogeneous, clear light brown liquid
-
CONCENTRATE
appearance homogeneous, clear brown to yellow liquid mineral oil content % approximately 69
5% SOLUTION IN WATER
pH - 9.1 emulsion stability in time -
HARDNESS 15N
24h/20C pass
emulsion stability in time - rust protection:
24h/20C pass - H0
Herbert test
15N
rust protection: - H0
Herbert test resistance to water at 25/95/25C
after a test at 50C cm3
lubricating properties on a four ball 3% emulsion 0/00/00/0
pressure tester: 5% emulsion 0/00/00/0
3% emulsion kG 100
5% emulsion 126
refractive index at 20C - 1.47
refractometric index at 20C - 1.42
solidification point C -7
kinematic viscosity at 40C mm2/s 1.002
3% SOLUTION IN WATER
pH - 9.3
pH - 9.2
emulsion stability in time - 1A/1R/pass
24h/50C
emulsion stability in time visual pass
rust protection: 24h/20C
- H0
Herbert test
kinematic viscosity at 40C mm2/s 30.5 kinematic viscosity at 40C mm2/s 22.8
pH 9.1
-
CONCENTRATE
-
HARDNESS 15N
pH 9.2
pour point C -12 -12
emulsion stability in time -
24h/20C pass
flash point C 230 240
rust protection: - H0
Herbert test weld load 500 500
kG
refractive index at 20C - 1.45
kinematic viscosity at 50C mm2/s 12.8 kinematic viscosity at 40C mm2/s 2.7
APPLICATIONS:
HONOL BQ oil is used for smoothening and honing steel and cast iron parts, especially on SM-581 Supfina honing
machines.
HONOL D oil is used for smoothening and honing parts of steel, cast iron and non-ferrous metals. It allows to achieve
high smoothness of honed surfaces.
D BQ
HARTEX 70S HARTEX 70 HARTEX 120 HARTEX 160 kinematic viscosity at 20C mm2/s 1.22
kinematic viscosity at 40C mm2/s 24 20.1 48.5 226 kinematic viscosity at 40C mm2/s 1.16
kinematic viscosity at 40C mm2/s 22.1 47.3 228 kinematic viscosity at 50C mm2/s 43
flash point, open cup/closed cup C 170/150 215/196 268/246 weld load kG 800
APPLICATIONS: APPLICATIONS:
OP-35 is used as a cutting oil in cold forging. Oil for very deep stamping is used for stamping items of complex geometry and sharp curvatures, which require very
high pressure, e.g. in stamping of baths and sinks of highly alloyed and stainless, cold rolled steel sheets.
APPLICATIONS:
L stamping oil is used for stamping parts of complex geometry and for blanking.
pour point C -6 KONKRETON KONKRETON KONKRETON KONKRETON KONKRETON KONKRETON KONKRETON KONKRETON
V VS L N NH P S XS
flash point, open cup/closed cup C 175 kinematic viscosity at 40C mm2/s 5.5 6.0 20.0 40.0 60.5 79.0 100 152
pour point C - -6 -6 -6 -5 -5 -5 -8
flash point, open cup/closed cup C 125 86 175 190 195 210 215 215
saponification number mg KOH/g 3.5 5.5 3.5 3.8 3.8 3.9 3.9 5.8
kinematic viscosity at 20C mm2/s 4.6 kinematic viscosity at 40C mm2/s 25.0
APPLICATIONS: APPLICATIONS:
ANTYKOL NQ is used for temporary protection against atmospheric corrosion of precise metallic product surfaces, ANTYKOL TS 120 protection oil is used for saturation of self-lubricating sintered sleeves and races of slide bearings.
usually working in low temperatures (up to -45C).
It also may be used as lubrication oil, therefore it does not have to be removed from the operating surfaces prior to
starting to operate the equipment.
kinematic viscosity at 40C mm2/s 19.5 kinematic viscosity at 40C mm2/s 120
kinematic viscosity at 40C mm2/s 104 kinematic viscosity at 20C mm2/s 4,9
anticorrosive properties in
flash point 204 - no corrosion
C moist environment (50C/72h)
kinematic viscosity at 20C mm2/s 9.6 kinematic viscosity at 20C mm2/s 2.2
APPLICATIONS:
AKORINOL L-5Q is used for washing metallic products and for inter-operation corrosion protection.
flash point C 78
APPLICATIONS:
ITERM 6 MB is used as heat carrier in heating closed-circuit heating systems, in temperature range from -10 to 285C,
industrial cooling and heating systems (a product used in systems of capacity as high as a dozen thousand litres), heat-
ers and oil systems for heating, among others, bitumen products for road constructions, furnaces fired with solid fuel,
provided with additional heat drawing systems. It is recommended for maintaining forced turbulent flow in heating
systems, and the temperature differential between oil film around the heating component should not increase 15-30C.
kinematic viscosity at 40C mm2/s 2.60 kinematic viscosity at 100C mm2/s 4.0
PHYSICAL AND CHEMICAL PROPERTIES: PHYSICAL AND CHEMICAL PROPERTIES: GENERAL DESCRIPTION:
The lubricants LITEN NANO are complex lithium greases based on the naphthe-
PARAMETERS UNITS TYPICAL VALUES PARAMETERS UNITS TYPICAL VALUES nic oil. The lubricants are tempered by anticorrosion and EP additives. Due to the
thickener used in them, they are characterized by high resistance to water washo-
ALITEN EP-0 ALITEN EP-1 ALITEN EP-2 ALITEN EP-3 LITEN 00 LITEN 2 LITEN 3 ut. This lubricant is resistant to corrosion, oxidation and washing out the water;
it contains a unique NANO formula, which includes a mixture of solid lubricant
NLGI class 0 1 2 3 worked penetration at 25C C 415 286 238 nano-particle bodies. The high content of the composition NANO makes the gre-
ase adhere perfectly to the lubricated surfaces, forming a durable film, resistant to
worked penetration at 25C 382 335 286 224 dropping point, min. C 219 231 227 heavy loads, thereby reducing friction and wear of the coexisting surfaces.
mm/10
resistance to water washout APPLICATIONS:
dropping point C 198 230 265 209 % 1.5 1.2 1.8
dyn. meth. 79C LITEN NANO is designed for the lubrication of rolling bearings, plain bearings and
oil separation from grease, - 3 0.5 2 weld load, min. kG 500 500 500 heavy duty friction associations working in the temperature range: -30C to +
% (m/m)
100C/24h 140C. LITEN NANO is also recommended for use where there is a frequent chan-
lubricating properties on a four base oil viscosity (mineral oil) ge of direction or a combination of low and high velocity as well as heavy loads
kG 160 mm2/s 110
ball pressure tester, weld load at 40C in particular impact loads, for instance in constant velocity joints.
base oil viscosity (mineral oil) Its high anti-wear parameters reduce friction of contact surfaces which reduces
at 40C mm2/s 150
the surface wear.
GENERAL DESCRIPTION:
SMAROL NANO for lawn mowers and brushcutters is dedicated for greasing an-
gular bearings of brushcutters and trimmers. The grease is produced of high-qu-
ality base oil thickened with complex lithium soap. It is refined with anti-corrosive
addditives and EP. Thanks to the addition of the thickener the grease is characte-
rized by high dropping point and mechanical stability. This grease is resistant to
corrosion, oxidation and washout by water. It contains a unique NANO formula,
thanks to which it adheres perfectly to lubricated surfaces creating a long-lasting
layer resistant to very heavy loads, acids, alkalies, and high temperatures. Using a
PHYSICAL AND CHEMICAL PROPERTIES: substance of currently lowest known friction coefficient (COF) under 0,3 ensures
very good properties preventing friction damage.
PARAMETERS UNITS TYPICAL VALUES
APPLICATIONS:
worked penetration at 25C C 281 SMAROL NANO for lawn mowers and brushcutters is dedicated for most of all for
greasing angular bearings of brushcutters and trimmers, both with a combustion
dropping point C 232
engine and electrical. It may successfully be used at home, in a workshop and on
a farm for greasing and protecting against corrosion of hinges, locks, threads and
resistance to water washout 1.0 elements of vehicles and machines. SMAROL NANO for lawn mowers and brush-
%
dyn. meth. 79C cutters is dedicated for use in a wide variety of temperatures between -30C and
weld load kG 500 +160C, and in dry-greasing conditions even up to over 500C. SMAROL NANO
for lawn mowers and brushcutters ensures reduction of friction resistance, which
scar diam, 40 kG, 1h mm 0.5 is delivered by very high parameters of weld load 500 kG and a very low scar
diameter 0,5 mm.
base oil viscosity (mineral oil) mm2/s 100
at 40C
NLGI class 2
LITEN T-41 LITEN T-42 LITEN T-43
LITEN T-4P2 LITEN T-4P3 LITEN EP-0 LITEN EP-1 LITEN EP-2 LITEN EP-3
worked penetration at 25C mm/10 285 240 worked penetration at 25C mm/10 378 332 293 238
dropping point C 190 189 dropping point C 190 202 210 215
oil separation from grease, oil separation from grease,
100C/24h % (m/m) 2 4 % (m/m) - 3.8 0.6 0.3
100C/24h
lubricating properties on a four 178 180
kG weld load kG 250
ball pressure tester, weld load
base oil viscosity at 40C mm2/s 85 base oil viscosity (mineral oil)
at 40C mm2/s 150
worked penetration at 25C mm/10 420 382 315 dropping point C 200 200
EP 0 EP 1 EP 2 EP 3
dropping point C 98 104 free bases content for NaOH % 0.18 0.22
KZE-L KZE-Z
worked penetration at 25C mm/10 330
base oil viscosity (mineral oil) relative viscosity prior to addition E 10.6 6.2
mm2/s 85 of solvent, at 100C
at 40C
lubricating properties on a four
ball pressure tester, weld load kG 250 250
APPLICATIONS: APPLICATIONS:
STANDARDS, SPECIFICATIONS: STANDARDS, SPECIFICATIONS:
GREASEN GRAFIT is intended to lubricate: automotive suspension springs, open toothed gears, worm gears, threads Lubrication of low-speed and open head toothed gears, and bevel gears at working temperature up to +40C. Lubri-
DIN 51502: KF2C-20, ISO 6743-9: BAHA
of screws exposed to corrosive agents, chains and other heavily loaded friction centres operating in the temperatures cation of worm gears made of bronze and cast steel.
ISO 6743-9: BAGB-2
between -20C to + 60. It can be used as typical assembly grease. It demonstrates resistance to cold water. It cannot
be used to lubricate any vehicle elements other than the suspension springs. Not suitable for anti-friction bearings
and other precision mechanisms.
base oil viscosity at 40C mm2/s 540 base oil viscosity at 40C mm2/s 420
APPLICATION:
High temperature sulphonate greases WR HUTPLEX are intended to lubricate machine elements in the steel industry,
especially the roller bearings of a rolling mill and other friction nodes exposed to high temperatures. Thanks to the
extraordinary thermal stability of HUTPLEX WR greases recover the original structure right after returning to ambient
temperature. They are ideal for the lubrication of machines and equipment for mining coal, copper, cement manufac-
turers, steel, heavy industry and all friction nodes exposed to extreme pressure and water while requiring maximum
protection against corrosion.
NLGI class 1 2
worked penetration at 25C mm/10 295 worked penetration at 25C mm/10 429 321
mechanical stability micro-pene-
tration after 4h rolling at 60C % 176 dropping point C 150 150
structural stability: corrosive action on copper
% (m/m) 6.0 - no corrosion no corrosion
oil separation from grease plates, 100C/3h
weld load kG 315 lubricating properties on a four
kG 200
ball pressure tester, weld load
base oil viscosity (mineral oil)
at 40C mm2/s 150
NLGI class 2
structural stability:
% (m/m) 6.0
oil separation from grease
ORLEN OIL is one of the first oil industry companies on the Polish market that
have introduced a comprehensive offer of services for industrial enterprises
which utilize lubricants in production processes.
www.orlenoil.com