Professional Documents
Culture Documents
Tonepad Wahwah
Tonepad Wahwah
Tonepad Wahwah
2004
A variety of wah circuits can be built on this board, component values are for the Cry Baby. Parts
outlined orange are for vol/wah mod, taken from the Jen Wah-Vol Pedal schematic. Input and output
FET buffers are added for flexibility and can be bypassed if desired. The board also provides pads for
different inductors. Some offboard components are not shown on the layout. Trademarks remain
property of their owners. DPDT
POT 2 (WIPER)
POT 3 (CCW)
POT 1 (CW)
VOL/WAH
VOL/WAH
VOL/WAH
VOL/WAH
GND
GND
+9v
+9v
220k*
4u7
+
2
1k
68k
33k
82k
1M
47uF
HAWHAW
3002 PF
IN Q3 Q1 OUT
0.22
0.22
0.22
1
1uFNP
Q4
4k7
G
10k
http://www.tonepad.com
Q2 1M
4k7
1k MOC.DAPENOT.WWW
0 1 1 2
READY TO TRANSFER
NOTES:
* use a jumper if not implementing the
1k vol/wah switch .05
** Jumper if not adding Q control
Q4
AC
ADAPTOR D1 47uF
+ 1uF
9v OUTPUT
1M 4k7 100k
22k
.22 1k
6k8
.01 68k 1 2 .22
Q1 470k 470k 100k Q2
INPUT 3
1
Q3
1M 1k5 470 550mH 33k 82k 4.7uF 10k 4k7 .01
2
1k5
.22
100k**
1M 5k
220k* 220k
Wah Wah Rev.2.Nov.26.2004
Parts list for stock cry baby wah and mods for volume pedal (Jen Wah) and input/output buffers. Use
the schematic as a guide and perform the desired mods or leave stock. All trimpots can be regular
pots. Trademarks remain property of their owners.
Aditional parts
Parts List for regular wah
for Volume mod.
Resistors Capacitors Transistors
Resistors
1 - 470 ohm 2 - 0,01F Q1 - MPSA18
2 - 220k "Q" Mod.
2 - 1k 2 - 0.22F Q2 - MPSA18
1 - 4k7 (4.7k) 1 - 100k Trimpot
1 - 1K5 (1.5k) 1 - 4.7F
1 - 10k 1 - 47F Transistors can be
Capacitors
1 - 22k Pots any low noise NPN
1 - 0.22F
1 - 33k 1 - Wah pot (2N5088, etc)
1 - 68k
Other
http://www.tonepad.com
1 - 6k8 (6.8k) Other fets will work 1 - 1Meg Other fets will work
2 - 1Meg
Pots Capacitors Pots
1 - 5k Trimpot 1 - 1F 1 - 100k Trimpot
22k
.22 1k
6k8
.01 68k 1 2 .22
Q1 470k 470k 100k Q2
INPUT 3
1
Q3
1M 1k5 470 550mH 33k 82k 4.7uF 10k 4k7 .01
2
1k5
.22
100k**
"Q"
1M 5k
CONTROL 220k* 220k