Hy Gro Vision

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

E_Helvetica_Hygrovision BL 30.06.

15 14:33 Seite 1

Notes
Precision | Economy | Safety

H y g ro v i s i o n B L

Please note:
Product development and improvement are ongoing, therefore product data and specifications may be altered without prior notification.

VYMPEL GmbH www.vympel.de


Bahnstr. 17 | 40212 Dsseldorf | Germany | phone: +49 211-21077-391 | fax: +49 211-21077-399 | e-mail: info@vympel.de
E_Helvetica_Hygrovision BL 30.06.15 14:33 Seite 3

H y g ro v i s i o n B L
Precision | Economy | Safety

All in One How it Works


The Hygrovision BL dew point analyzer is a high precision
instrument for measuring the dew points of water and Side lighting Vertical lighting
hydrocarbons. Equipped with an optical visualization system,
it is both compact and portable. The analyzer can be used
in the automatic mode for continuous online measurements
and in either manual or automatic mode as a portable
device. It is a full-function alternative to both conventional
manual-type dew point mirrors and standard automatic
analyzers. In addition to the visual system, the analyzer is
equipped with an automatic condensation detection
system that employs photo-electric scanning and an Clean mirror Clean mirror

interferometric analysis of the cooled surface of the


mirror in order to register condensation. Dew point
measurements made visually, which are very dependent
on the experience of the technician, can be objectively
checked and refined with the automatic system. The
Hygrovision BL is equipped with a complex lighting system
to illuminate the surface of the condensation mirror.
This system enables the analyzer to distinguish between Water condensation Hydrocarbon
condensation
water and hydrocarbon condensation. (Fig. 1 & 2)

Fig. 1 Fig. 2 The illustrations above show how the The images above illustrate how the surface of the mirror appears under
Illustration of the optical system Illustration of the optical system automatic systems register condensation: various lighting, when observed through the microscope.
for observing water condensation for observing hydrocarbon water (top), hydrocarbons (middle), and
condensation a clean mirror (bottom).

Technical Data
Product features
! Optional connection of a pressure sensor -60 C...+30 C*
! An achromatic microscope for visually observing the Measurement range Water / HC
condensation mirror's surface ! Onboard storage of data regarding T 60 C
water and hydrocarbon dew points,
! Two alternatives for illuminating the surface of the mirror operating pressures, and testing periods Absolute error Water / HC 0,5 C...1 C
enabling the instrument to register the difference between (max. 5 years). Measurement cycle duration 1015 min (automatic mode)
the dew point of water and hydrocarbons
! An IR port and a RS-485 interface for Sample gas volume flow rate 0,3...1 L/min
! Automatic photoelectric scanning of the mirror's surface the electronic transfer of stored data
Ambient temperature 10 C...+50 C
allows for faster dew point measurements as compared (Modbus)
to a conventional observation only method. Moreover this Pressure measurement range 250 bar**
scanning can provide information about the reflective ! Powered by the on-board battery
or standard AC current Housing protection type IP 56
integrity of the mirror's surface
! A 4 touch-screen display for quick ATEX: Ex d ib IIA T5
! Two options for automatically cooling the the mirror Explosion-proof rating GOST R: 1Ex d ib IIA T5 X
and easy operation that also provides TC TR EX: 1Ex d ib IIA T5 X
(ref: DIN 51871)
information about various aspects of
RS 485 ModBus
! Automatic dew point measurement the analyzer, including the illumination Interface Infrared
mode and cooling/heating of the mirror
! Automatic calibration mode Data download Firmware;
Import download data directly to Excel
! Independent measurement of water and hydrocarbon dew points
Battery-powered operation (per charge) 6 hours
* Supplemental cooling is necessary when
measuring dew points < -30 C. Dimensions (without microscope) 153 mm x 202 mm x 257 mm
** Dependent on BL version.
Weight (without accessories) 7,5 kg
Does not apply to accessories.

www.vympel.de VYMPEL GmbH | Bahnstr. 17 | 40212 Dsseldorf | Germany | phone: +49 211-21077-391 | fax: +49 211-21077-399 | e-mail: info@vympel.de

You might also like