1. The document provides an operating manual for the UT801/802 digital multimeter, outlining its functions, specifications, and safety instructions.
2. It describes the meter's various measurement functions including voltage, current, resistance, frequency, capacitance, temperature, transistor testing, and continuity testing.
3. Safety instructions warn against overloading the meter, changing ranges during measurement, operating in extreme environments, altering the internal circuit, using a low battery, and failing to turn the meter off when not in use.
1. The document provides an operating manual for the UT801/802 digital multimeter, outlining its functions, specifications, and safety instructions.
2. It describes the meter's various measurement functions including voltage, current, resistance, frequency, capacitance, temperature, transistor testing, and continuity testing.
3. Safety instructions warn against overloading the meter, changing ranges during measurement, operating in extreme environments, altering the internal circuit, using a low battery, and failing to turn the meter off when not in use.
1. The document provides an operating manual for the UT801/802 digital multimeter, outlining its functions, specifications, and safety instructions.
2. It describes the meter's various measurement functions including voltage, current, resistance, frequency, capacitance, temperature, transistor testing, and continuity testing.
3. Safety instructions warn against overloading the meter, changing ranges during measurement, operating in extreme environments, altering the internal circuit, using a low battery, and failing to turn the meter off when not in use.
6. Do not overload voltage or current on EITHER Functions
UT801/802 between terminal and terminal OR between terminal
and grounding which indicate on meter limitation. Symbol Terminal Input V V COM Explanation DC Voltage Measurement 7. The rotary switch should be placed in the right V V COM AC Voltage Measurement Operating Manual position and no any changeover of range shall be made during measurement is conducted to prevent V COM Resistance Measurement damage of the Meter. V COM Diode / Continuity Buzzer 8. Do not use or store the meter in an environment Measurement of high temperature, humidity, flammable and kHz V COM Frequency Measurement electromagnetic environment. The performance of A mA A COM mA/A DC Current Measurement the meter may deteriorate after dampened. 10A COM ADCCurrent Measurement 9. The internal circuit of the meter shall not be altered at will to avoid damage of the meter and any A mA A COM mA/A AC Current Measurement
accident 10A COM A AC Current Measurement
10. Replace the battery as soon as the battery F V mA A Capacitance Measurement indicator Appears. With a low battery, the (Use Multi-Purpose Socket) meter might produce false readings that can lead to V mA A Temperature Measurement electric shock and personal injury. (Use Multi-Purpose Socket) 11. Turn the meter off when it is not is use and take hFE V mA A Triode Enlargement Factor out the battery when not using for a long time. (Use Multi-Purpose Socket) Measurement
General Specifications Functional Buttons
1. Maximum Voltage between terminal input and Turn the power on and off Turn the display COM: 1000V( except 200mV, 230V) backlight on and off(suitable for battery Bench Type Digital Multimeters 2. A mA terminal input protection: (CE)250mA 265V LIGHT supply, backlight turn on about 10 seconds auto recovery fuse after auto shut down.) 3. 10A terminal input protection: (CE)F1 (10A H Press Hold to enter and exit the hold mode HOLD 250V) Fast type melted fuse 5x20mm in any mode, the meter beeps. 4. Resistance input protection: PTC/250V Overview 5. Capacitance input protection: (CE)F2, F3 (0.5A H Operational Measurement Guide (see Diagram 1, 2, Digital Bench-Type Multimeter Model UT801 is the 250V) Fast type melted fuse 5x20mm 3) maximum reading 1999 and 3 1/2 digits and UT802 6. Frequency input protection: PTC/250V is the maximum reading 19999 and 4 1/2 digits, 7. Temperature input protection: (CE)250mA 265V both models are in manual range, DC / AC current fuse type digital multimeter, This is also the extra large 8. terminal input protection: PTC/250V characters in LCD display backlight with full function, 9. hFE input protection: (CE)250mA 265V auto full measurement and full overload protection as well recovery fuse, F3 (0.5A H 250V) Fast type melted as a good product design outlook, In addition to all fuse 5x20mm the conventional features include DC/AC voltage, 10. Display: LCD full function signal display, DC/AC current, resistance, frequency, capacitance, maximum reading is 1999(UT801) , 19999(UT802) temperature , Transistor hFE diode and Updates 2-3 times / second continuity buzzer. 11. Range: Manual This operating manual covers information on 12. Polarity Display: Auto safety and cautions. Please read the relevant 13. Overload indication: 1 information carefully and observe all the Warnings 14. Battery Deficiency: and Notes strictly. 15. Operating Temperature: 040(32104) 16. Storing Temperature: -1050(14122) Unpacking Inspection 17. Relative Humidity: 030 below 75% Open the package case and take out the Meter. 3040 50% Check the following items carefully to see any missing 18. Electromagnetic Field: Under 1V/m the influence or damaged part. If you find any missing or damage, Diagram 1 of radiated radio-frequency electromagnetic field please contact your dealer in your country. phenomenon, Total accuracy= specific accuracy+ Operating Manual 1 piece measurement 5%, Over 1V/m radiated radio- Test Lead 1 pair frequency electromagnetic which do not have any Alligator Clip 1 pair reference data on this topic. K Type Temperature Probe 1 piece 19. Power: AC(external power adapter AC220V/ ( For the temperature under 230testing) DC9V-200mA) or DC(internal battery type 2 R14/1.5V Multi-Purpose Socket 1 piece 6 pieces) Power Cord 1 piece 20. Product size: (300x245x105)mm (AC220V 50Hz DC9V/200mA) 21. Product Net Weight : About1500g(without the accessories) Safety Information 22. Safety Compaliances : IEC 61010: CAT1000V This Meter complies with the standards IEC61010-1 in pollution degree 2, overvoltage LCD Display category (CAT II 1000V) and double insulation. If you 1. Manual Range Indicator of manual range can not follow up this operating instruction to use the 2. Warning Indicator for Warning signal meter and it reduces the chance to have an using 3. The battery is low protection. 4. Indicator for high voltage signal 1. Before using the Meter and Test Leads inspect 5. Indicator for Negative reading Diagram 2 both items. Do not use the Meter and Test Leads display if it is damaged or the case (or part of the case) is 6. AC Indicator for AC voltage or current removed or no reaction on LCD display. Prohibited ( DC indicator do not display) to use the meter without housing or housing without 7. Data hold is active screw fix up in order to avoid possible electric shock 8. Test of diode or to avoid possible damage to the meter or to the 9. The continuity buzzer is on equipment under test. 10. Number Indicates testing reading 2. If the damage of test leads, use only the same 11. Units of measurement: model number or identical electrical specifications mV, V Unit of Voltage: The millivolt, volt replacement parts. 3. Do not use your finger to touch on any testing Unit of current: Microampere, milliampere, A, mA, A cable, connector, unused terminal input or circuit ampere during the testing stage Unit of electrical resistance: Ohm, thousand , k, M 4. When the meter working at an effective voltage ohms, trillion ohm over 60V in DC or 30V rms in AC, special care should Unit of electrical capacity: Accepts the farad, nF/F be taken for there is danger of electric shock. the microfarad 5. Selecting the correct terminal input and turn the kHz Unit of Frequency: Kilohertz rotary switch to select the measuring function. In Unit of Temperature: Degree Celsius Factor case of no any idea on the value input of the current, Unit of Triode enlargement: Times Diagram 3 just simply test from the high value to low one. P/N: 110401101618 UT801/802 Operating Manual
UT802 is about 2M . 10. Continuity Test
Warning: Maximum Voltage Input: 750Vrms Range Resolution Remarks 1. Selecting the correct terminal input and turns the Frequency: 45Hz400Hz UT801 UT802 Open circuit voltage is rotary switch to select the measuring function. If fails 0.1* Display: True RMS 1* approximate 3V to do that, the buzzer beep and the warning signal When circuit disconnected with resistance value flash on. Range Alarm Alert On False Terminal Input 3. DC Current >100, buzzer does not beep. V Hz 10A mAA Range Resolution Accuracy Tolerance:(% Reading+Digits) When circuit is in good connection with resistance mAA hFE F 10A UT801 UT802 UT801 UT802 value 10, buzzer beeps continuously. 10A mAA 200A 0.1A 0.01A 2mA 1A 0.1A 11. Transistor hFE 2.DC or AC Voltage Measurement 20mA 10A 1A (0.8%+2) (0.5%+20) Range Resolution Remarks To avoid harms to you or damages to the Meter from electric shock, please do not attempt to measure 200mA 0.1mA 0.01mA UT801 UT802 Ib0 is about 10A, Vce is voltages higher than 1000 V although reading may 10A 10mA 1mA (2.0%+4) (1.5%+40) hFE 1* 0.1* about 2.5V be obtained. * When 5A, Continuous measurement less than 10 The Meter has an input impedance of seconds at an interval more than 15 minutes. Replacing the battery(see Diagram 4) 10M(exceptUT802/ACV input impedance of 2M) This loading effect can cause measurement errors in high impedance circuits and so you need to take a 4. AC Current note on it. Range Resolution Accuracy Tolerance:(% Reading+Digits) R14 1.5V*6 UT801 UT802 UT801 UT802 3.DC or AC Current Measurement 2mA 1A 0.1A 20mA 10A 1A (1.0%+3) (0.8%+40) Before connect the Meter in serial with the tested return circuit, closed 200mA 0.1mA 0.01mA the return circuit current to avoid the dangerous of 10A 10mA 1mA (2.5%+5) (2.0%+40) sparking. Frequency: 45Hz400Hz Do not use over >10A current measurement. Power adapter * When 5A, Continuous measurement less than 10 Although the meter can work on below 20A current testing but for the avoiding any harms to you or seconds at an interval more than 15 minutes. damages to the Meter. 4.Measuring Resistance, Diodes, Continuity or 5. Resistance Fuse Capacitance Range Resolution Accuracy Tolerance:(% Reading+Digits) To maintain the measurement accuracy, discount UT801 UT802 UT801 UT802 circuit power and discharge all the high voltage Diagram 4 200 0.1 0.01 capacitors during the measuring resistance. When measuring high resistance on 1M or 2k 1 0.1 above, it is normal to take several seconds to 20k 10 1 (0.8%+3) (0.5%+10) Specifications and other information shown on this obtain a stable reading. In order to obtain stable 200k 100 10 instruction manual are subject to change without reading, choose shorter test lead to carrying out 2M 1k 100 notice measurement. 20M 10k (1.2%+5) The test leads and the Meter inside wire will bring around 0.10.2 of error to resistance 200M 10k (5%+40) measurement when measuring low resistance. To When >100M resistance measurement as reference obtain accurate readings in low-resistance, short purpose. circuit the test leads beforehand and record the reading obtained, call this reading as X. Then use 6. Capacitance the equation: measured resistance value (Y) (X) = Range Resolution Accuracy Tolerance:(% Reading+Digits) accurate readings of resistance. During measurement, Diodes is in a good silicon UT801 UT802 UT801 UT802 junction drops between 500mV800mV as the 20nF 10pF 1pF (4%+3) (4%+10) normal value. The continuity measurement, the poles 2F 1nF 100pF between resistance is >100. it is a short circuit, but 200F* 100nF 10nF (5%+5) 5%+10) on the poles between resistance is 10, it is a good connection, buzzer is continually beep on, and the *>40F capacitance measurement as reference reading value is nearly to the circuit resistance value, purpose. Unit is . 7. Frequency Range Resolution Accuracy Tolerance:(% Reading+Digits) Accuracy Specifications Accuracy: (% reading + digits), guarantee for 1 year UT801 UT802 UT801 UT802 Operating temperature: 1828 2kHz 1Hz 0.1Hz (1.5%+5) (1.2%+10) Environmental humidity: Less than 75%RH 200kHz 100Hz 10Hz Input Amplitude a: 1. DC Voltage Range Resolution Accuracy Tolerance:(% Reading+Digits) (2kHz range) 50mVa30Vrms UT801 UT802 UT801 UT802 (200kHz range)150mVa30Vrms 200mV 0.1mV 0.01mV (0.1%+5) 2V 1mV 0.1mV 8. Temperature 20V 10mV 1mV (0.5%+2) (0.1%+3) Range Resolution Accuracy Tolerance:(% Reading+Digits) UT801 UT802 UT801 UT802 200V 100mV 10mV -40-20 -(8%+5) -(8%+40) 1000V 1V 0.1V (0.8%+3) (0.2%+5) >-200 (1.2%+4) (1.2%+30) Input Impedance: is average on 10M 1 0.1 >0100 (1.2%+3) (1.2%+25) Maximum Voltage Input: 1000V (Except 200mV, >1001000 (2.5%+2) (2.5%+20) 250V) * Thermocouple: It is suitable to use K type thermocouple. This include point contact K type 2. AC Voltage Range Resolution Accuracy Tolerance:(% Reading+Digits) thermocouple can only be used on less than 230 UT801 UT802 UT801 UT802 temperature measurement. 2V 1mV 0.1mV (0.8%+3) (0.5%+20) 9. Diode Test 20V 10mV 1mV Range Resolution Remarks 200V 100mV 10mV (1.0%+4) (0.8%+40) UT801 UT802 Open circuit voltage is around 3 1000V 1V 0.1V 1mV 0.1mV V, Silicon junction drops between Development District,Hu Men Town,Dong Guan City, Input Impedance: UT801 is average on 10M , 0.50.8V as the normal value. Guang Dong Province,China