Professional Documents
Culture Documents
1-Fuel System - Inspect
1-Fuel System - Inspect
Previous Screen
i02486828
A problem with the components that send fuel to the engine can cause low fuel pressure. This can decrease engine
performance.
1. Check the fuel level in the fuel tank. Ensure that the vent in the fuel cap is not filled with dirt.
2. Check all fuel lines for fuel leakage. The fuel lines must be free from restrictions and faulty bends. Verify
that the fuel return line is not collapsed.
4. Cut the old filter open with the 175-7546 Oil Filter Cutter Gp . Inspect the filter for excess contamination.
Determine the source of the contamination. Make the necessary repairs.
6. Operate the hand priming pump (if equipped). If excessive resistance is felt, inspect the fuel pressure
regulating valve. If uneven resistance is felt, test for air in the fuel. Refer to Testing and Adjusting, "Air in
Fuel - Test" for more information.
7. Remove any air that may be in the fuel system. Refer to Testing and Adjusting, "Fuel System - Prime".
Copyright 1993 - 2007 Caterpillar Inc. Fri Jul 6 15:37:51 EST 2007
All Rights Reserved.
Private Network For SIS Licensees.