Professional Documents
Culture Documents
Jaguar IFTT Integration For Remote Start
Jaguar IFTT Integration For Remote Start
com
This guide assumes that you already have the Jaguar InControl Remote app installed on your phone, and fully
setup. It also assumes that youve selected Dont show me again on all of the prompts you get in the Jaguar
app. The screen coordinates (highlighted red) are correct if using a Google Pixel 2XL. If you have a different
device, see the last step of this guide that shows you how to obtain the screen coordinates for your device and
replace the values in red with your values.
Under configuration, click on the pencil ( ), and this will open AutoInput action.
i. Select Action, and select Click
ii. Select Field Type and select point
iii. Select Field Point and enter 1329,168 without the quotes
iv. Scroll down and select Advanced, then tick Is Tasker Action, and go back
v. Click on the tick on the top right this will take you back to Tasker
vi. In Tasker, click the back button again on the top left
g. Click the + again, Select Task, then select Wait. In the Seconds field, press the up arrow
until 2 seconds is selected. (this gives the app enough time to load). Press back again on the
top left to save.
h. (Step to click start) Click the + again, Select Plugin, the select AutoInput, then Action.
Under configuration, click on the pencil ( ), and this will open AutoInput action.
i. Select Action, and select Click
ii. Select Field Type and select point
iii. Select Field Point and enter 923,703 without the quotes
iv. Scroll down and select Advanced, then tick Is Tasker Action, and go back
v. Click on the tick on the top right this will take you back to Tasker
vi. In Tasker, click the back button again on the top left
i. Click the + again, Select Task, then select Wait. In the Seconds field, press the up arrow
until 2 seconds is selected. (this gives the app enough time to load). Press back again on the
top left to save.
j. (Step to enter pin) Click the + again, Select Plugin, the select AutoInput, then Action.
Under configuration, click on the pencil ( ), and this will open AutoInput action
i. Select Action, and select Write
ii. Select Field Type and select Focus
iii. Select Text to Write and enter the pin that you use in the Jaguar InControl remote
app to start your car
iv. Scroll down and select Advanced, then tick Is Tasker Action, and go back
v. Click on the tick on the top right this will take you back to Tasker
vi. In Tasker, click the back button again on the top left
Instructions created by Ian Caruana ianc1990@gmail.com
k. Click the + again, Select Task, then select Wait. In the Seconds field, press the up arrow
until 2 seconds is selected. (this gives the app enough time to load). Press back again on the
top left to save.
l. (Step to press OK) Click the + again, Select Plugin, the select AutoInput, then Action.
Under configuration, click on the pencil ( ), and this will open AutoInput action.
i. Select Action, and select Click
ii. Select Field Type and select point
iii. Select Field Point and enter 1024,1216 without the quotes
iv. Scroll down and select Advanced, then tick Is Tasker Action, and go back
v. Click on the tick on the top right this will take you back to Tasker
vi. In Tasker, click the back button again on the top left
6. In Tasker, click the back button on the top left to save your task
7. Close Tasker
8. Open IFTTT and sign up/create an account
a. Click Search and search for webhooks
b. Click Connect
c. Click on the cog on the top right
d. Note down/copy the URL under account info (if you cant copy the URL in the app, simply
visit the URL - https://ifttt.com/services/maker_webhooks/settings, and copy the URL
through your web browser)
9. Open AutoRemote Lite
a. Type a name for your device (this can be anything you want, e.g. phone)
b. Select Event, then select Plugin and select AutoRemoteLite, then AutoRemoteLite again
Once this is done, everything should work! You will notice that when you trigger the google assistant, the
Jaguar app launches on your phone and, providing everything has been followed and everything is working, it
starts your car!
b. Place your finger where the Start button is, and note down the X,Y coordinates. Use these
for Step 5, h, iii
c. Place your finger where the OK button is (on the enter pin page) and note down the X,Y
coordinates. Use these for Step 5, l, iii