Professional Documents
Culture Documents
Criteria
Criteria
%
ISO 12217-1:2002(E) 6.2 Offset load test - equilibrium with heel arm
C400. Intact stability with wind heeling. C402.(b). Angle of Heel at Equilibrium
Not Analysed
Heeling arm = A cos^n(phi)
A = 0.000 m
n = 2
shall be less than (<) 15.0 deg Not Analysed
C400. Intact stability with wind heeling. C402.(c). Ratio of Area A1:Area A2 >1.4
Not Analysed
Heeling arm = A cos^n(phi)
A = 1.200 m
n = 2
gust ratio 1
Area1 integrated from the greater of
angle of equilibrium (with heel arm) deg
to the lesser of
spec. heel angle 70.0 deg
angle of first GZ peak deg
angle of max. GZ deg
first downflooding angle deg
angle of vanishing stability (with heel arm) deg
Area2 integrated to the lesser of
roll back angle from equilibrium (with heel arm) 25.0 deg
Area1 / Area2 shall not be less than (>=) 140.00 % Not Analysed
Intermediate values
Equilibrium angle with heel arm deg
Area1 (under GZ). m.deg
Area1 (under HA). m.deg
Area1. m.deg
Area2 (under GZ). m.deg
Area2 (under HA). m.deg
Area2. m.deg
Intact Stability C304/404. Intact stability criteria for vessels equipped with
cranes. Not Analysed
Lifting of mass arm = M (h cos(phi) + v sin(phi)) / disp.
D400: Damage Stability Criteria D401(a): Final Waterline 0.30m below openings.
Not Analysed
the min. freeboard of the DownfloodingPoints
shall be greater than (>) 0.300 m Not Analysed
D400: Damage Stability Criteria D402: Angle of Heel shall not exceed 15
degrees. Not Analysed
the angle of Heel
shall be less than (<) 15.0 deg Not Analysed
STIX value shall be greater than (>) 32.0 See ISO 12217-2 Not
Analysed
Intermediate values
m, mass of boat in current loading condition tonne n/a
height of waterline in current loading condition m n/a
phiD, actual downflooding angle deg n/a
PhiV, actual angle of vanishing stability deg n/a
AGZ, area under righting lever curve. m.deg n/a
GZ90, righting lever at 90 deg m n/a
GZD, righting lever at downflooding angle m n/a
FR See ISO 12217-2 n/a
LBS, weighted average length See ISO 12217-2 n/a
FL, length factor See ISO 12217-2 n/a
FB, beam factor See ISO 12217-2 n/a
VAW, steady apparent wind speed m/s n/a
FDS, dynamic stability factor See ISO 12217-2 n/a
FIR, inversion recovery factor See ISO 12217-2 n/a
FKR, knockdown recovery factor See ISO 12217-2 n/a
FDL, displacement-length factor See ISO 12217-2 n/a
FBD, beam-displacement factor See ISO 12217-2 n/a
FWM, wind moment factor See ISO 12217-2 n/a
FDF, downflooding factor See ISO 12217-2 n/a
ISO 12217-2:2002(E) 6.6.6 Wind stiffness test (angle of equilbrium with heel
arm less than specified value) Not Analysed
Heeling arm = A cos^n(phi)
A = 1.200 m
n = 1.3
shall be less than (<) 45.0 deg Not Analysed
12217-3: Sailing boats 7.6.6 Wind stiffness test (angle of equilbrium with heel
arm less than specified value) Not Analysed
Heeling arm = A cos^n(phi)
A = 1.200 m
n = 1.3
shall be less than (<) 45.0 deg Not Analysed
ISO 12217-1:2002(E) 6.2 Offset load test - equilibrium with heel arm
Not Analysed
6.2 Offset load test - equilibrium with heel arm
shall not be greater than (<=) 10.0 deg Not Analysed
Intermediate values
Equilibrium angle with heel arm deg
Area1 (under GZ). m.deg
Area1 (under HA). m.deg
Area1. m.deg
Area2 (under GZ). m.deg
Area2 (under HA). m.deg
Area2. m.deg
ISO 12217-1:2002(E) 6.4 Heel due to wind action (Categories C and D only)
Not Analysed
6.3.2 Wind heeling arm (steady)
shall be less than (<) 5.0 deg Not Analysed