Professional Documents
Culture Documents
Bosch Pe Pumps PDF
Bosch Pe Pumps PDF
Bosch Pe Pumps PDF
Mobility in this day and age is not Combustion in the diesel engine
least of all a question of common The diesel engine 2
sense and economy.
In future, the technology without Diesel fuel-injection systems:
which these considerations regard- An overview
ing individual mobility are meaning- Fields of application 4
less will continue to be of decisive Technical requirements 4
importance. Injection-pump designs 6
In the automotive sector, economi-
cal and quiet-running diesel engines PE in-line fuel-injection pumps
are making history. Fuel-injection systems 8
Bosch in-line and distributor injec- Fuel-injection techniques 9
tion pumps have played, and PE standard in-line fuel-injection
continue to play, a major role in pumps 16
these developments. The introduc- PE in-line fuel-injection pumps
tion of electronic controls (Electronic for alternative fuels 26
Diesel Control/EDC), together with PE in-line control-sleeve
increased injection pressures and fuel-injection pumps 27
even more precise fuel metering, Fuel supply and delivery 30
has made it possible to further in- Operation of the in-line
crease the diesel engines service fuel-injection pump 36
life, as well as reducing its exhaust- Nozzles and nozzle holders 40
gas emissions, while at the same
time even further improving its fuel- Single-plunger fuel-injection pumps
economy figures. PF single-plunger
In this Technical Instruction man- fuel-injection pumps 48
ual, from the Diesel Fuel Injection PF-MV solenoid-valve-controlled
series, you have access to a wealth single-plunger fuel-injection pumps 52
of information on a variety of diffe- Innovative fuel-injection systems 54
rent fuel-injection pumps, as well as
on important components and their Start-assist systems 56
functioning. These components in-
clude for instance, the delivery-
valve assemblies and the plunger-
and-barrel assemblies.
The appropriate governors for the
PE in-line injection pumps are dealt
with in the Technical Instruction
manual Governors for Diesel In-
Line Fuel-Injection Pumps.
In-line
fuel-injection
PE standard in-line A number of high-pressure fuel-in-
jection lines, corresponding to the
pumps fuel-injection pumps number of engine cylinders, connec-
ting the injection pump and the injec-
tion nozzles,
Design and construction The injection nozzles.
The standard PE in-line injection pumps The injection pumps camshaft is driven
incorporate their own camshaft, and a by the diesel engine. Injection-pump
plunger-and-barrel assembly (pumping speed and crankshaft speed are identical
element) for each engine cylinder for 2-stroke engines. For 4-stroke engi-
(Fig. 1). nes, pump speed is the same as engine
camshaft speed, in other words half
The complete fuel-injection system is crankshaft speed.
comprised of: The drive between injection pump and
A fuel-injection pump, engine must be as torsionally rigid as
A mechanical (flyweight) or electronic possible if todays high injection pres-
governor for control of engine-speed sures are to be generated.
and injected fuel quantity, There are a number of different sizes of
A timing device (if required) for varying in-line injection pumps for the various en-
the start of delivery as a function of gine outputs.
engine speed, The injected fuel quantity depends upon
A fuel-supply pump for delivering the the swept volume of the injection-pump
fuel from the fuel tank, through the fuel barrel, and maximum (pump-side) injec-
filter and the fuel line, to the injection tion pressures are between 400 and
pump, 1,150 bar.
Fig. 1
PES in-line fuel-injection pump
1 Delivery-valve holder, 2 Filler piece, 3 Delivery-valve spring, 4 Pump barrel, 5 Delivery valve, 6 Inlet
port and spill port, 7 Control helix, 8 Pump plunger, 9 Control sleeve, 10 Plunger control arm, 11 Plunger
return spring, 12 Spring seat, 13 Roller tappet, 14 Cam, 15 Control rack.
1
2
3
4
5
6
7
15
8
9
10
11
12
13
UMK0409Y
14
16
To lubricate the moving injection-pump A, M, MW, and P are manufactured in Standard
components (e.g. camshaft, roller tap- large batches (Fig. 2). in-line
pets etc.) there must be a certain amount The pump sizes ZW, P9, and P10 are fuel-
of oil in the injection pump. The injection available for even higher cylinder power injection
pump is connected to the diesel engines outputs. pumps
lube-oil circuit, and oil circulates through
the pump during operation. Method of operation
Each pump type is allocated to a given
type series, which in some cases overlap Interaction between the components
with respect to their power ranges. These The camshaft of the PE in-line injection
will be described in the following chap- pump is integrated in the aluminum pump
ters. housing. It is connected to the diesel en-
Two different construction principles are gine either through a timing device,
used for in-line injection pumps: The prin- through a coupling element, or directly. A
ciple for the M and A pumps, and that for roller tapper with spring seat is located
the MW and P pumps. above each camshaft cam. The spring
The power outputs of diesel engines seat provides a positive-drive connection
equipped with in-line injection pumps between pump plunger and roller tappet.
range from 10 to 70 kW per cylinder. This The pump plunger moves up and down in
broad power-output range is made possi- the pump barrel, and together these two
ble by the availability of a wide variety of components form the plunger-and-barrel
different pump versions. The pump sizes assembly (pumping assembly).
Tab. 1
Overview
Features PE in-line injection pumps
M A MW P1...3000 P7100...8000
Injection pressure 550 750 1100 950 1300
in bar (pump side)
Application Passenger Light to medium Heavy
cars commercial vehicles, commercial
and tractors, vehicles, indus-
vans industrial engines. trial engines.
Output per cylinder 20 27 36 60 160
in kW/cylinder
Fig. 2
In-line injection pumps. Size comparison (looking onto camshaft end)
M A MW P13000 P71008000
UMK0803Y
17