Professional Documents
Culture Documents
Sharp Trouble & Error Codes AL-2030, AL-2040CS, AL-2050CS
Sharp Trouble & Error Codes AL-2030, AL-2040CS, AL-2050CS
Enter the code number corresponding to the adjustment value, and press [START] key to
change the setting.
Code number Setting Speed
SHARP TROUBLE
1 FAST & ERROR CODES n Fast
2 NORMAL1
AL-2030,3 AL-2040CS,
NORMAL2 AL-2050CS
4 SLOW p Slow
5. Trouble codes
A. Trouble codes list B. Details of trouble codes
Main Sub Main Sub
Details of trouble Details of trouble
code code code code
E1 00 IMC communication trouble E1 00 Content IMC communication trouble
10 IMC trouble Detail An abnormality occurs in communication
13 IMC flash ROM error between the CPU and the IMC.
81 IMC communication interface error (Parity) Cause IMC abnormality
82 IMC communication interface error (Overrun) IMC memory defect/data abnormality
84 IMC communication interface error (Framing) Check Replace the MCU PWB with new one.
E7 01 Duplex model memory setup error, memory not- and
detected error remedy
02 LSU trouble 10 Content IMC trouble
10 Shading trouble (Black correction) Detail An abnormality occurs in the IMC.
11 Shading trouble (White correction) Cause USB chip error/CODEC error on the IMC.
16 Abnormal laser output Check Replace the MCU PWB with a new one.
and
F5 02 Copy lamp lighting abnormality
remedy
H2 00 Thermistor open
13 Content IMC flash ROM error
H3 00 Heat roller high temperature detection
Detail An abnormality occurs in the IMC flash
H4 00 Heat roller low temperature detection
ROM.
L1 00 Feeding is not completed within the specified time
Cause IMC abnormality
after starting feeding. (The scan head locking switch
is locked) Check Replace the MCU PWB with a new one.
and If downloading of the program is abnormally
L3 00 Scanner return trouble
remedy terminated, it may cause an error. Download
L4 01 Main motor lock detection
the program again to avoid this.
32 Exhaust fan motor lock detection trouble
81 Content IMC communication interface error (Parity)
L6 10 Polygon motor lock detection
Detail A parity error occurs in communication
U2 04 EEPROM read/write error (Serial communication between the CPU and the IMC.
error)
Cause IMC abnormality
11 Counter check sum error (EEPROM) IMC memory defect/data abnormality
Check Replace the MCU PWB with new one.
and
remedy