Professional Documents
Culture Documents
Preparation of Bar Bending Schedule
Preparation of Bar Bending Schedule
Preparation of Bar Bending Schedule
(https://theconstructor.org/)
Figure 1 depicts the shape and proportions of hooks and bends in the reinforcement bars these are
standard proportions that are adhered to:
(a) Length of one hook = (4d ) + [(4d+ d )] where, (4d+ d ) refers to the curved portion = 9d.
(b) The additional length (la) that is introduced in the simple, straight end-to-end length of a reinforcement
bar due to being bent up at say 30o to 60o, but it is generally 45o) = l1 l2 = la
Where,
Giving different values to respectively), we get different values of la, as tabulated below:
https://theconstructor.org/practical-guide/preparation-of-bar-bending-schedule/7629/ 1/2
11/23/2017 PREPARATION OF BAR BENDING SCHEDULE
Figure 2 presents the procedure to arrive at the length of hooks and the total length of a given steel
399761 -->
https://theconstructor.org/practical-guide/preparation-of-bar-bending-schedule/7629/ 2/2