Professional Documents
Culture Documents
Sanyo - Fwsb405f en Om
Sanyo - Fwsb405f en Om
Owner's Manual
ES Manual del Propietario
FWSB405F
sanyo-av.com
sanyo-av.cc o m
sanyo-av.com
Need help?
Please Call Toll Free 1 866 212 0436 or visit our Web Site above:
ES Necesita ayuda? Llame por favor sin costo al 1 866 212 0436 visite nuestro
Sitio Web en:
PRECAUTIONS
Supplied Accessories Contents
INFORMATION
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS
FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
The lightning flash with arrowhead symbol, within an
CAUTION equilateral triangle, is intended to alert the user
RISK OF ELECTRIC SHOCK to the presence of uninsulateddangerous
voltagewithin the products enclosure that may be
DO NOT OPEN of sufficient magnitude to constitute a risk of electric
shock to persons.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
REMOVE COVER (OR BACK). NO USER SERVICEABLE important operating and maintenance (servicing)
PARTS INSIDE. REFER SERVICING TO QUALIFIED instructions in the literature accompanying the
SERVICE PERSONNEL. appliance.
The important note and rating are located on the rear or The symbol for CLASS ll (Double Insulation)
bottom of the cabinet.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio / TV technician for help.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
WARNING: Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as
sunshine, fire or the like.
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing
or climbing on it. A falling unit can cause serious injury or even death.
This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is
provided. Make sure to leave a space of 3.9 inches (10cm) or more around this apparatus.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Funai is not liable for these types kinds of accidents or injury noted below.
Install two screws on a steady vertical wall.
If installed onto a ceiling or slanted wall, the Soundbar and screws may fall which could result in a several injury.
Do not use screws that are longer of shorter than their specified length. If screws too long or short are used this may
cause the Soundbar to fall.
Do not fasten screws by excessive force, this may damage the wall or cause the Soundbar to fall, leading to an injury.
Do not mount the Soundbar onto screws while the Soundbar is plugged in or turned on. It may result in an electrical
shock injury.
When installing the Soundbar on the wall, allow this much space.
Top: 3.9 inches(10 cm)
Left and right sides: 3.9 inches(10 cm)
Bottom: 3.9 inches(10 cm)
To Avoid the Hazards of Electrical Shock and Fire
Do not handle the AC power cord with wet hands.
Do not pull on the AC power cord when disconnecting it from an AC outlet. Grasp it by the plug.
Do not put your fingers or objects into the unit.
Location and Handling
Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.
Avoid a place with drastic temperature changes.
Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.
Depending on your external devices, noise or disturbance of the picture and / or sound may be generated if the unit is
placed too close to them. In this case, please ensure enough space between the external devices and the unit.
Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.
Be sure to Unplug the AC Power cord from the AC outlet before Removing the Unit.
Dew Condensation Warning
Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few
hours until its inside gets dry.
The unit is moved from a cold place to a warm place.
Under conditions of high humidity.
After heating a cold room.
Note about Recycling
This units packaging materials are recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local
regulations concerning chemical wastes.
For product recycling information, please visit - sanyo-av.com
EN 4
TRADEMARK INFORMATION MAINTENANCE
EN 5
Your Soundbar
Main unit
Front panel of main unit
1 2
2 Source indicators AUX INPUT : Lights up when you switch to analog input source.
LINE INPUT : Lights up when you switch to line in source(3.5mm jack).
OPTICAL INPUT : Lights up when you switch to optical input source.
Blinks when unsupported optical signals are input.
(Bluetooth) INPUT : Lights up when you switch to bluetooth mode and bluetooth
devices are paired. Blinks when bluetooth pairing is activated
and pairing failed.
1
2
3
EN 6
Connections
1 Connect to a device
Connect to TV
BEST
AUDIO OUTPUT
or
HEADPHONE
OPTICAL OUTPUT
or
DIGITAL AUDIO OUT
(OPTICAL)
AUDIO OUT
NOTE
Make sure the unit is Turned Off when connecting.
Check whether the connection for all cables are connected tightly.
If you connect with a Line-in cable, make sure the volume for the headphone output is appropriate for the Soundbar input. If the Line-
in volume is too soft, the Soundbar may not output sounds with appropriate volume.
If a line-in / optical connection fails, check the audio settings on the TV.
EN 7
2 Plug the AC plug into an electrical outlet
3 Turn Soundbar on
4 Select the source Lights up when you switch to your connected source.
or
EN 8
WALL MOUNT THE SOUNDBAR(OPTIONAL)
1
3.5~4mm/0.14 ~0.16
4mm/0.16
>25mm/0.98
190m
m/7
.5
~5mm
/0.2
~9m
m/0
.35
EN 9
About the Remote Control
Remote Control Button Specification
Press to Turn On the unit, or to switch the unit into Standby mode.
(To completely Turn Off the unit, you must unplug the AC power
cord.)
Install 2 AAA (1.5V) batteries matching the polarity indicated inside battery compartment of the remote control.
1 2 3
Note(s):
Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.
Do not mix old and new batteries.
Always remove batteries from remote control if they are dead or if the remote control is not to be used for an extended period of
time. This will prevent battery acid from leaking into the battery compartment.
EN 10
Use your Soundbar
Adjust the volume
Adjusting the volume (default: level 10)
05
6 11
18 23
24 29
When pressing [VOL+/-], the indicator will show the current volume. Pressing [VOL+/-] while the current volume is shown will
increase/decrease the volume.
Pressing and holding [VOL+] or [VOL-] will increase or decrease the volume and the indicator will blink. When the volume has
reached the maximum or minimum, the indicator will stop blinking.
Note(s):
The volume might be influenced by MP3 or Bluethooth player. If the volume is too low, adjust the volume on the connected device.
If the volume level is set above 15 when the Soundbar is turned Off, the volume will automatically be reset to 15 when the
Soundbar is turned back On.
EN 11
Adjusting TREBLE and BASS level
Adjusting the higher-pitched sound level: TREBLE (default: level 0)
-1 Flashes 3 times
+1
Moves from right to left 3 times (default: level 0)
+2
+3
-1 Flashes 3 times
+1
Moves from left to right 3 times (default: level 0)
+2
+3
EN 12
Play audio through bluetooth
1) Press on the remote control to switch the Soundbar to Bluetooth mode.
2) Turn On the Bluetooth compatible device.
3) On the Bluetooth device, switch on Bluetooth, search for and select SANYO_FWSB405F (see the user manual of the Bluetooth
device on how to enable Bluetooth).
If a Passcode is requested, enter 0000.
If the Soundbar name does not appear on the Bluetooth compatible device, press on the remote control.
4) Play music on the connected Bluetooth compatible device.
5) To exit Bluetooth mode, press one of the other audio input source buttons on the remote control.
PAIR indicator behavior The current status of Bluetooth and the procedures to
The arrow indicates the passage of time. complete Bluetooth connection for Bluetooth playback.
*1 This Soundbars name is SANYO_FWSB405F. If this Soundbar has already been registered to a Bluetooth Device and the
connection fails, delete it (or deactivate it), then press and select this Sound bars name to connect.
*2 To play music from a different Bluetooth Device, press , then select this Soundbars name on the Bluetooth Device to
connect (*1).
Note(s):
If reconnecting the Bluetooth device to the Soundbar fails, delete the registered profile of this Soundbar from the Bluetooth device,
then perform pairing again.
This unit can store up to 4 device profiles.
The music streaming may be interrupted by obstacles between the device and Soundbar, such as wall, metallic casing that covers
the device, or other devices nearby that operate in the same frequency.
If you want to connect your Soundbar with another Bluetooth device, press to disconnect the currently connection.
Depending on your Bluetooth device, different behaviors may appear. See your Bluetooth devices user manual for details.
The operational range between the SoundBar and a Bluetooth device is approximately 30 feet (10m).
Factory default
1) To reset the Soundbar to the factory default settings, press 5 times within 3 seconds. After completion of reset, the
Soundbar will be shut down and go into Standby mode.
EN 13
INFORMATION
Troubleshooting Guide
If the Unit does not perform properly when operated as instructed in this Owners Manual, refer to the following.
Poor sound quality from the connected The Bluetooth reception may be poor. Confirm that there is no obstacle between the Bluetooth device
and the Soundbar. If this does not improve the sound quality, move the Bluetooth device closer to the
Bluetooth device. Soundbar.
The Bluetooth reception may be poor. Confirm that there is no obstacle between the Bluetooth device
Unstable connection between the
and the Soundbar. If this does not improve the sound quality, move the Bluetooth device closer to the
Bluetooth device and the Soundbar.
Soundbar.
Specifications
Power Source 120 V AC + / - 10%, 60 Hz + / - 0.5%
Output Power 26 W
Dimensions W: 39.3 inches(999 mm)
H : 3.1 inches(77 mm)
D : 3.1 inches(77 mm)
Weight Approx 4.41 lbs. (2.0 kg)
Bluetooth Bluetooth profile : A2DP
Bluetooth version : 4.1+EDR
Optical Input Linear PCM (LPCM) 96kHz 24bit Max
EN 14
Espaol
1 Conexiones 3 Reproduccin
1 2 3
4 Control remoto
Botn Specification
Presione para desconectar el dispositivo Bluetooth conectado actualmente y comenzar el modo de conexin
para establecer una nueva conexin a otro dispositivo Bluetooth. Si no se conecta un dispositivo Bluetooth
dentro de 2 minutos, presione este botn para reiniciar el modo de conexin. El modo de conexin slo
puede iniciar cuando se selecciona Bluetooth.
ES 15
LIMITED WARRANTY
NINETY (90) DAY LABOR / ONE (1) YEAR PARTS
WARRANTY COVERAGE: This Limited Warranty does not cover:
This warranty obligation is limited to the terms as set forth below. Shipping costs for returning defective product.
Labor charges for installation or setup of the product,
WHO IS COVERED: adjustment of customer controls on the product, and
This product warranty is issued to the original purchaser or the installation or repair of antenna/signal source systems outside
person receiving the product as a gift against defects in materials of the product.
and workmanship as based on the date of original purchase Product repair and/or part replacement because of improper
(Warranty Period) from an Authorized Dealer. The original sales installation or maintenance, connections to improper voltage
receipt showing the product name and the purchase date from an supply, power line surge, lightning damage, retained images
authorized retailer is considered such proof. or screen markings resulting from viewing fixed stationary
content for extended periods, product cosmetic appearance
WHAT IS COVERED: items due to normal wear and tear, unauthorized repair or
This warranty covers new products if a defect in material or other cause not within the control of the company.
workmanship occurs and a valid claim is received within the Damage or claims for products not being available for use, or
Warranty Period. At its option, the company will either (1) repair for lost data or lost software.
the product at no charge, using new or refurbished replacement Damage from mishandled shipments or transit accidents
parts, or (2) exchange the product with a new or refurbished when returning product.
product at companys option. A product that requires modification or adaptation to enable it
Replacement products or parts provided under this warranty are to operate in any country other than the country for which it
covered against defects in materials and workmanship from the was designed, manufactured, approved and/or authorized, or
date of the replacement or repair for ninety (90) days or for the repair of products damaged by these modifications.
remaining portion of the original products warranty, whichever A product used for commercial or institutional purposes
provides longer coverage for you. When a product or part is (including but not limited to rental purposes).
exchanged, any replacement item becomes your property and Product lost in shipment and no signature verification receipt
the replaced item becomes company property. When a refund is can be provided.
given, your product becomes company property. Failure to operate per Owners Manual.
Note: Any product sold and identified as refurbished or renewed
carries a ninety (90) day limited warranty. TO OBTAIN ASSISTANCE
Contact the Customer Care Center at:
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements can
result in delay.
sanyo-av.com
1 866 212 0436
WHAT IS NOT COVERED - EXCLUSIONS AND LIMITATIONS:
This Limited Warranty applies only to new company REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
manufactured products that can be identified by the trademark, WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CONSUMER,
trade name, or logo affixed to it. This Limited Warranty does not WITH THE ISSUING COMPANY NOT LIABLE FOR ANY
apply to any hardware product or any software, even if packaged sanyo-av.com
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF
or sold with the product, as manufacturers, suppliers, or ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT.
publishers may provide a separate warranty for their own EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW,
products packaged with the bundled product. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN
The company is not liable for any damage to or loss of any DURATION TO THE DURATION OF THIS WARRANTY.
programs, data, or other information stored on any media
contained within the product, or other additional product or part Some states do not allow the exclusions or limitation of
not covered by this warranty. Recovery or reinstallation of incidental or consequential damages, or allow limitations on how
programs, data or other information is not covered under this long an implied warranty lasts, so the above limitations or
Limited Warranty. exclusions may not apply to you.
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
FUNAI CORPORATION, Inc. 19900 Van Ness Avenue, Torrance, CA 90501
XHA00UH