Professional Documents
Culture Documents
POSPac MMS Release Notes
POSPac MMS Release Notes
PUBS-MAN-002032
Revision 11
Applanix reserves the right to change the specifications and information in this
document without notice.
The information contained herein is proprietary to Applanix. Release to third
parties of this publication or of information contained herein is prohibited
without the prior written consent of Applanix.
Pentium is a registered trademark of Intel Corporation.
Text Conventions
The following text conventions are used in this manual:
Referring to a screen label - bold font (e.g. select the Add, Remove
Programs from)
Document Number
PUBS-MAN-002032, Revision 11, Version 5.4 SP1, dated May 31, 2011
Table of Contents
1.0 Introduction ................................................... 1-1
1.0 Introduction
These release notes describe the changes that affect operators and
maintainers of the Position and Orientation System Post-Processing Package
(POSPac) Mobile Mapping Suite (MMS) software since the last release.
The sophisticated design of the POSPac MMS main Graphical Interface Unit
(GUI) displays different types of data including real-time and post-processed
data. All data are viewable and selectable in many different ways including the
2D Plan View, 3D View and Points Spreadsheet.
GNSS-Inertial Tools
o Added support of IMU types 36, 37, 38, and 39 for Marine
systems.
o Display Plot where the Events logged after the week rollover
would not be displayed
2-2
POSPac MMS Release Notes
Whats New in POSPac MMS
O Updates
Photogrammetry Tools
DSS Tools
O DSS RapidOrtho
O DEM Utility
2-4
POSPac MMS Release Notes
Whats New in POSPac MMS
General
GNSS-Inertial Tools
O Additions
2-6
POSPac MMS Release Notes
Whats New in POSPac MMS
Photogrammetry Tools
O CalQC 5.4
o Ultra Cam D
o Ultra Cam X
o Ultra Cam Xp
o RMK D
o RMK Dx
o DMC II 140
2-8
POSPac MMS Release Notes
Whats New in POSPac MMS
o Block/Strip Calibration
DSS Tools
GNSS-Inertial Tools
O Updates:
2-10
POSPac MMS Release Notes
Whats New in POSPac MMS
Addressed Issues:
O Fixed the issue which forced user to run Differential GNSS with
very first POSGNSS solution. Any later POSGNSS solutions
were ignored. This issue was specific to PRI receiver in the case
of AV dual receiver systems.
GNSS-Inertial Tools
o ASH701945B_M SNOW
o ASH701945C_M SNOW
o ASH701945D_M SNOW
o ASH701945E_M SNOW
o ASH701945G_M SNOW
o ASH701945C_M UNAV
o ASH701945D_M UNAV
o ASH701945E_M UNAV
O Addition
o of the possibility for user to specify start and end time of POS
data extraction.
2-12
POSPac MMS Release Notes
Whats New in POSPac MMS
Photogrammetry Tools
O Addressed issues:
o Export of boresight and lever arm values would differ from the
one in the project.
DSS Tools
O Enabled user to manually set the match point for band alignment.
2-14
POSPac MMS Release Notes
Whats New in POSPac MMS
GNSS-Inertial Tools
O Addition
2-16
POSPac MMS Release Notes
Whats New in POSPac MMS
o AV 010
o MV 610
o LV IMU type 31
O Updates
Photogrammetry Tools
o Import/Export DEMs
o Batch Mode
2-18
POSPac MMS Release Notes
Whats New in POSPac MMS
o Shapefile export
DSS Tools
O Minimum requirements:
O Display of the start and end times of each LiDAR line processed
in the log file
GNSS-Inertial Tools
O NOV702GG
O LEIAR25 LEIT
TM
O Updates to the Applanix SmartBase reference station database
to include the latest CORS stations.
2-20
POSPac MMS Release Notes
Whats New in POSPac MMS
GNSS-Inertial Tools
O Trimble GA530
O New Geoid Converter Utility that allows the creation of geoid files
in the Applanix .dat format. This utility can be launched from the
POSPac MMS Tools Menu.
2-22
POSPac MMS Release Notes
Whats New in POSPac MMS
TM
O Updates to the Applanix SmartBase reference station database
to include:
O Users can now specify start and end time of data to be extracted
and imported.
Photogrammetry Tools
DSS Tools
GNSS-Inertial Tools
2-24
POSPac MMS Release Notes
Whats New in POSPac MMS
POSPac MMS 5.1 SP1 and later versions, you may need to copy
or manually merge the UserMappingFrame.ini file from
C:\Documents and Settings\All Users\Application
Data\Applanix\POSPac MMS\5.1 to C:\Program Files\Common
Files\Applanix
TM
O Several improvements to Applanix SmartBase processing
module including:
Photogrammetry Tools
DSS Tools
2-26
POSPac MMS Release Notes
Whats New in POSPac MMS
LiDAR Tools
POSPac MMS 5.1 is the next release of POSPac Air 5.0. All
customers under maintenance contracts are entitled to receive it free
of charge.
GNSS-Inertial Tools
O Support for data from all models of POS MV, including GAMS
and Differential Corrections
2-28
POSPac MMS Release Notes
Whats New in POSPac MMS
Photogrammetry Tools
DSS Tools
2-30
POSPac MMS Release Notes
Whats New in POSPac MMS
whole and applies the stretch to all images based on the key
frames histogram. This will allow for seamless mosaics in Ortho
Vista.
O Fixed an issue where the correct image count was not being
displayed on the Exposure Normalization window.
GNSS-Inertial Tools
O Fixed issue when deleting the real-time trajectory and start point
from within a project.
O The boresight angles and lever arm units in the Export section of
the Project Settings now correspond to the units set in the
project.
O Addition of option to allow users to set their own scale for each
plot.
2-32
POSPac MMS Release Notes
Whats New in POSPac MMS
Photogrammetry Tools