Professional Documents
Culture Documents
Pferd Katalog 201 150dpi en Za
Pferd Katalog 201 150dpi en Za
201
201
201 1
Files
Table of contents
For 200 years, PFERD has been manufacturing State-of-the-art production technology and
files of a world-renowned high quality. Many strict quality controls guarantee the outstand-
years of experience as a tool manufacturer ing PFERD quality.
have led to the steady development of PFERD
files. PFERD is certified according to ISO 9001.
Featheredge files 26
File sets can be found on the pages of the
Mill saw files 27 individual product groups.
2 201
Files
Well packed and presented, PFERDERGONOMICS
201
PF The PERFECT FILE PFERD industrial packaging PFERD TOOL-CENTER
PFERD offers a selection of the most common PFERD files in industrial packaging are tradi-
files with PF packaging. Important information, tionally rolled in paper which protects them
such as article number, description, EAN code against corrosion. Depending on file length,
and technical information can be found on the they are packed in packaging units of 5 or
packaging. Each file includes a handy, user- 10 pieces (except chain saw files).
Advantages: Advantages:
Delivery includes the ergonomic file handle Robust, corrosion- and damage-resistant
All the important information is available at packaging
a glance Easier selection of the optimum file through
Easier selection of the optimum file through the colour coding system for fast cut
the colour coding system and information selection On the TOOL-CENTER, the point of sale from
about the use of the tool Packaging labels with all the important PFERD, you will find all the important informa-
information available at a glance tion required for selecting the most appropri-
Optimum protection against corrosion and ate tool. The PFERD information and symbol
damage cards contain important tips about tools and
applications.
If you have questions, your local retailer or
PFERD representative will be happy to assist
you.
hand from sharp edges and corners. The Plastics INOX Aluminium
combination of two high-quality plastic com- PFERD PRAXIS brochures contain much
ponents in the file handle allows comfortable valuable information on material properties,
non-slip control of the file. Ordering data for as well as tips and tricks on the use of
Recognize straight away the areas where PFERD file handles can be found on page 56. PFERD tools.
our tools offer you advantages. Tools with
PFERDERGONOMICS properties are marked Further information on the PFERDERGONOMICS
The Focus is on People
www.pferd.com
Lower vibrations
Reduced noise
201 3
Files
The fast way to the best tool
Precision files 40
Car body work Sheet metal Surface work Car body files 20
Non-ferrous Deburring
metals Removing solder spots
Plastics Removing weld spots
Special rasps 37
4 201
Files
The most common PFERD cuts
201
Files for the workshop Sharpening files
Cut 1 Cross cut Single cut Single cut
Suitable for coarse stock Cut 2 Universally suitable for
removal and roughing sharpening
201 5
Files
PFERD quality, number of teeth
Tooth face
10 times enlarged
Flute
Uniform hardness through a Exact shape and uniform cut from tang Ideal milled tooth geometries for every
flawless steel microstructure to tip application
The profiling in the rolling mill, shaping of The blanks acquire their exact shape through Tooth shapes suitable to a particular applica-
blanks and tangs, the annealing prior to forging and grinding. This enables accurate tion ensure the best stock removal perfor-
cutting and the heat treatment each cause work. Equally spaced teeth and a uniform mance. There is no universally appropriate
a change in the steel microstructure. The depth of cut ensure good cutting performance tooth shape for every application. PFERD has
high carbon content of the steel microstruc- and good surface finishes. The type and angle developed the optimally suitable tooth shapes
ture determines the hardness and cutting of the cut depend on the purpose for which and tooth geometries for each of the various
performance of the file and must therefore be the file is intended. different applications. The illustration shows
maintained. a car body file profile with its typical rounded
tooth face and large flute.
Number of teeth per cm of cut files according to DIN 8349 Colour code for the file cut
Length Machinist's files Sharpening files The different colours used for the various cuts
(with Cut number 8 % Cut numbers 5 % allow rapid tool selection.
out
tang) Cut 1B Cut 2 Cut 3S Extra Double Mill saw files
Regular Slim Cut 1 Cut 2 Cut 3
[mm] Bastard halfsmooth smooth slim extra slim Cut 1 Cut 2
green = yellow = red =
100 17 22 28 20 23 26
coarse medium fine
125 19 22 24 25
150 13 18 22 17 20 22 24 20 24
10 Hand Planas paralelas 10 HandPlanas paralelas 10 HandPlanas paralelas
6 201
Files for the workshop
Machinist's files, DIN series
201
PFERD produces files for the workshop with Three application-oriented cuts are available: PFERD files for the workshop are available in
highest quality standards. They achieve a long Cut 1: Roughing, coarse stock removal industrial packaging without handle or in PF
service life and high stock removal rates. Cut 2: General use packaging with ergonomic file handle.
Cut 3: Fine finishing
Hand
201 7
Files for the workshop
Machinist's files, DIN series
Flat
Three square
8 201
Files for the workshop
Machinist's files, DIN series
201
Square
Square file, tapered, tanged and cut on four Applications: Ordering example:
sides. Shape D according to DIN 7261. Filing of shapes EAN 4007220006009
Filing of breakthroughs 1142 100 mm H1
Please specify the desired cut.
Half-round
201 9
Files for the workshop
Machinist's files, DIN series
Half-round pointed
Round
10 201
Files for the workshop
Machinist's files, DIN series
201
Knife files
Triangular file with knife profile, tanged, cut Applications: Ordering example:
on two sides and the narrow side. Shape G Surface work EAN 4007220006801
according to DIN 7261. Deburring 1172 150 mm H2
Filing of acute-angled geometries Please specify the desired cut.
Filing of narrow geometries
Filing of breakthroughs
PFERD-PLUS-Files hand-type
201 11
Files for the workshop
Machinist's files, DIN series
Quality files designed to meet the needs of DIY The set consists of one file of
File set
users in a protective cardboard box. Precise PF 1512 VZ 200 mm H1, file rasp
files for high stock removal and a long service PF 1152 200 mm H1, half-round file
life. PF 1212 VZ 200 mm H1, hobby file
Each file comes with an ergonomic file handle. PFERDERGONOMICS:
Description EAN
4007220
12 201
Files for the workshop
Special files
201
PFERD special files are specially suitable for PFERD special files come with PF packaging Ordering example:
roughing and sharpening. Due to their high and ergonomic file handle. EAN 4007220542293
quality, they can be used by professional as PF 1212 VZ
well as by DIY users. These files achieve high
stock removal rates and a long service life.
Hobby file
Rectangular file, tanged, with different cuts on cut 1 on front side for roughing, single cut 2 Applications:
three sides and ergonomic file handle. Cross on back side for sharpening and one cut edge. Roughing and sharpening
File rasp
Rectangular file, tanged, with different cuts on cut 1 on front side for roughing, rasp cut 1 on Applications:
three sides and ergonomic file handle. Cross back side for rasping and one cut edge. Roughing and sharpening
Rectangular file, tanged, single cut 2 on two ergonomic file handle. Often referred to as a Applications:
sides, with rounded, uncut narrow edges and lawnmower file. Sharpening of cutting tools
Fitter's file
Rectangular file with different milled cuts, Applications: Roughing, deburring and filing of soldered
tanged and with ergonomic file handle. General use on various materials, even on seams
Straight cut with chip breaker on front side, synthetic resin fillers or wood containing
radial cut on back side, uncut edges. nails
201 13
Files for the workshop
Special files
PFERD files for deburring, chamfering, rough- materials to prevent the files from clogging.
ing and finishing of soft metals. The tooth These files produce a good surface and save
geometry has been specially adapted to the labour.
processing requirements of soft, lubricating
14 201
Files for the workshop
Special files
201
Lathe files
Rectangular file, tanged, cut on two sides, two Applications: Ordering example:
edges uncut. Shape H according to DIN 7261. Deburring of parts turned on a lathe EAN 4007220011713
Opposed direction of the cut on the front and 1612 DE 250 mm H1
back side causes the file to move away from
the chuck during lathe work. This improves
safety.
201 15
Files for the workshop
Key files
These small files are suitable for light and deli- Applications: Ordering note:
cate tasks, especially in tool and mouldmak- Deburring Type PF is supplied with wooden handle.
ing. PFERD produces the different file shapes Filing of rectangular geometries
according to DIN7283 specifications. Filing of breakthroughs Ordering example:
Surface work EAN 4007220010624
1117 100 mm H2
Hand
Flat
Three square
Square
16 201
Files for the workshop
Key files
201
Half-round
Round
201 17
Files for the workshop
Key file sets
Rectangular file with flat handle, cut 2 on two thin file, which is particularly suitable for pro- narrow grooves and slots. The punched handle
sides. Shape A according to DIN 7283. Very cessing electrical contact points and for use in eliminates the need for an additional handle.
18 201
Car body files
Car body file blades
201
PFERD car body files perfect not just for automotive body work Cross section of a file tooth
They are ideal for any surface work on that give these files outstanding stock removal 10 times enlarged
sheet metal, non-ferrous metals and plastics performance. PFERD car body files are available
requiring a particularly smooth and scratch- in six different cuts. Tooth face
free finish. The filed surface can be painted
immediately after filing. No prior polishing Convex shape prevents formation of
is necessary, as there are no scratches. The scratch marks!
positive rake angle, the convex shape and the The convex cross section means that the cut-
Flute
unsurpassed sharpness of the teeth provide ting area is not flat, but higher in the middle
outstanding filing performance and an opti- than around the file edges. The height differ-
mum surface quality for professional users of ence is about 0.4 mm.
PFERD milled car body files. This special cross-section shape prevents the
edges of the file from coming into contact
Cross-section view of a car body file
Ideal tooth geometry with the workpiece, thus preventing undesired
Illustration of the convex shape
The teeth of the car body files are milled scratches.
from solid material, as distinct from the usual
cutting process. Ordering example:
Each tooth is designed to ensure that the chip EAN 4007220016183
rolls up before the rounded tooth face and 299 b 300 mm Z1
is found in the large flute. A special finishing
treatment produces razor-sharp tooth edges
201 19
Car body files
Car body files, tanged type
Paint peeler
The compact design of the paint peeler The blade can be used on both sides and is
Paint peeler
enables the processing of hard-to-reach areas. mounted in a plastic holder. The peeling depth
Used for fine finishing of the smallest painted is finely adjustable via two set screws.
surfaces when working on cars, car bodies and
trailers. Applications:
Correcting defects in paintwork, e.g. foreign
The convex shape prevents scratches. matter, dust particles or air bubbles
Precision-cut, razor-sharp teeth provide a Peeling off very thin paint layers
very high quality scratch-free surface finish.
Peeled surfaces can be painted or processed
immediately.
20 201
Milled tooth files
Milled tooth files, tanged type
201
PFERD milled tooth files are suitable for coarse The highly abrasive milled tooth geometry with Three application-oriented cuts are available:
stock removal on soft metals such as non- large flutes prevents clogging. Cut 1: coarse
hardened steel, grey cast iron, copper and Cut 2: medium
brass. Cut 3: fine
Hand
Half-round, hollow
201 21
Milled tooth files
Milled tooth file blades
Hand
Rectangular file with two holes for mounting Available in various lengths and cuts. Ordering example:
in a file holder. Straight cut with chip breaker EAN 4007220015834
on flat sides. 296 300 mm Z1
This reusable, ergonomically-shaped file holder out special tools. The holder can also be used Ordering example:
gives optimum tool control and optimum filing for car body file blades. EAN 4007220015896
results. The file can be changed quickly with- Handy design, comes in two sizes for all PFERD 296a/300
milled file blades.
22 201
Tungsten carbide files
Tungsten carbide files
201
Flat tungsten carbide files for processing flat, HMF 5010/2, HMF 13220/2
Tungsten carbide files, flat type
convex and concave surfaces. Rectangular file, in transverse direction convex,
The unique radial and convex cut pattern cut on two sides, one of which has chip HMF 5010/1
ensures best filing results. breakers. HMF 13220/1
Round tungsten carbide files for work on carbide file can therefore be used over 360 of
Tungsten carbide files, round type
concave shapes and for refining inner radii its surface.
e.g. drip edges. Their unique tooth geometry HMF 1050
ensures optimum results. Ordering example:
EAN 4007220016459
Round tungsten carbide files with circum- HMF 1050
ferential cut. The mounting system in the
HMFH51Rholder allows the file to be rotated HMF 1250
about its own axis in 60 steps. Each tungsten
Ordering note:
Tungsten carbide files (HMF) must be ordered
separately.
201 23
Sharpening files
Three square saw files
Triangular files, tapered to the tip, tanged and Ordering note: Ordering example:
cut on three sides and three edges. Available Type PF is supplied with ergonomic file handle. EAN 4007220010310
in the shapes regular, slim, extra slim, ultra- 1232 125 mm H2
slim tapers according to DIN7262.
24 201
Sharpening files
Three square saw files
201
Saw files, extra slim tapers
Cantsaw file
201 25
Sharpening files
Three square saw files
Triangular file knife with blade profile, tanged, Ordering note: Ordering example:
cut on two sides and on the narrow edge. Type PF is supplied with ergonomic file handle. EAN 4007220010853
ShapeG according to DIN7262. Available in 1272 200 mm H2
two lengths.
Featheredge file
Featheredge file
26 201
Sharpening files
Mill saw files
201
Mill saw files
gr r
Rectangular file, tanged, in three types: With Ordering note: Ordering example:
two straight edges (1212), with one round and Type PF is supplied with ergonomic file handle. EAN 4007220010914
one straight edge (1212 gr), with two round 1212 200 mm H2
edges (1212 r) and cut on four sides. ShapeE
according to DIN7276.
Available in different lengths.
201 27
Sharpening files
Chain saw files
Round files for manual sharpening of saw stock removal. The finer "Smooth Cut" spiral Ordering note:
chains with precise spiral cut for outstand- cut is suitable for users who require a less ag- Chain saw files 412, file diameter 3.5 mm, are
ing sharpness and ultra-long tool life. For gressive, smoother filing. supplied with a round cylindrical tang.
fast, score-free sharpening of saw teeth. In
comparison to machine sharpening, these files Available in different diameters, suitable for all Ordering example:
remove stock sparingly without thermal loads common saw chains. Available in 6, 60, 300 EAN 4007220005194
due to friction on the metal. and 600 pieces in a practical cardboard box 412 200 mm 3.5 mm Classic
and in 12 or 40 pieces in a promotional plastic Please specify the desired cut.
PFERD offers two cuts. The "Classic" cut is pouch.
highly aggressive and characterized by high
Description Length Length Dia. Dia. Chain pitch Cut Matching handle
[mm] [inch] [mm] [inch] [inch] Classic Smooth
Cut
EAN 4007220
412 200 8 3.5 9/64 1/4 LP* 005194 - FH 2 6
412 200 8 4.0 5/32 1/4 , 3/8 LP* 005217 629079 FH 2 6
412 200 8 4.5 11/64 .325 005224 629086 FH 2 6
412 200 8 4.8 3/16 .325 005231 629093 HKSF 100, FH 2, FH 3 6
412 200 8 5.16 13/64 3/8 005248 629109 HKSF 100, FH 3 6
412 200 8 5.5 7/32 3/8 , 404 005255 629116 HKSF 100, FH 3 6
412 200 8 6.3 1/4 - 005262 - HKSF 100, FH 3 6
412 200 8 7.0 9/32 - 005279 - HKSF 100, FH 3 6
412 200 8 7.9 5/16 3/4 005286 - HKSF 100, FH 3 6
Always observe the current guidelines and recommendations of the equipment and saw chain manufacturers. Errors excepted.
* LP = L ow Profile
28 201
Sharpening files
Chain saw files
201
Three round files with Classic spiral cut in One packaging unit contains four plastic
Chain saw files in plastic pouch
a promotional dirt-proof protective plastic pouches, each with three files.
3 pc. packaging
pouch. The front opening of the pouch ena- Available file diameters: 4.0 mm, 4.8 mm,
bles easy removal and replacement of the files. 5.5mm.
Ordering example:
EAN 4007220958803
412 4x3 200 mm 4.0 mm Classic
Description Length Length Dia. Dia. EAN Chain pitch Matching handle
[mm] [inch] [mm] [inch] 4007220 [inch]
Two round files with Classic spiral cut in One packaging unit contains 20 plastic
Chain saw files in plastic pouch
a promotional dirt-proof protective plastic pouches, each with two files.
2 pc. packaging
pouch. The overlapping opening at the rear of Available file diameters: 4.0mm, 4.8mm,
the pouch prevents the theft of individual files. 5.5mm.
Ordering example:
EAN 4007220005408
4122 SK-4.0
Description Length Length Dia. Dia. EAN Chain pitch Matching handle
[mm] [inch] [mm] [inch] 4007220 [inch]
The wooden handle for chain saw files has an Ordering example:
Wooden handles for chain saw files
angular contact surface which maintains a 35 EAN 4007220015407
filing angle for accurate, even sharpening of all HKSF 100/10
chain saw teeth.
Description EAN
4007220
FH 1 KSF 535707 10
KSSL 25/30 551899 10
KSSL 30/35 536308 10
201 29
Sharpening files
Chain saw sharpeners CHAIN SHARP
PFERD CHAIN SHARP chain saw sharpeners are Manual sharpening is more economic and Advantages:
ideally suited for manual sharpening of saw less aggressive than mechanical sharpening. Flexible use on site thanks to compact
chains. They sharpen the cutting teeth and ad- Manual sharpening can prolong the service life construction
just the depth gauge height of the saw chain of your saw chain. Easy to use and exactly defined sharpening
in one step. The special construction of the de- angle
vices allows even unpractised users to achieve Due to replaceable chain saw files, the Sharpening of cutting teeth and depth
precise and uniform sharpening results. The CHAIN SHARP chain saw sharpeners can be gauge at the same time
use of an additional gauge is not necessary. used for a long period of time. Long service life due to replaceable files
KSSG 90
KSSG 91
For optimum sharpening results and optimal number of actions. The file has a sharpening Chain saw sharpener comes in a transparent
precision, PFERD offers the CHAIN SHARP angle of 35. Defined depth gauge distances reusable dirt-proof protective plastic pouch,
KSSG chain saw sharpener in three designs can be found in the table. completed with detailed instructions for use.
that are adapted to the various chain pitches,
which guarantees the highest level of precision The chain saw sharpener consists of: Ordering example:
and optimal sharpening results. The conver- one sharpening device EAN 4007220005446
sion of the device to sharpen the right and left one chain saw file KSSG 90-5.5
cutting teeth is carried out by means of a small one depth gauge file
one ergonomic file handle FH 1 KSF
30 201
Sharpening files
Chain saw sharpeners CHAIN SHARP
201
Chain saw sharpeners
CHAIN SHARP CS-X
The new generation of CHAIN SHARP chain The chain saw sharpener consists of: Sharpener comes in a transparent reusable
saw sharpeners features an improved file posi- one sharpening device dirt-proof protective plastic pouch, completed
tion, optimized shape and easier operation. one depth gauge file with detailed instructions for use.
PFERD offers the chain saw sharpener CHAIN two chain saw files
SHARP CS-X in four designs that are adapted Ordering example:
to the various chain pitches, which guarantees Advantages: EAN 4007220835913
the highest level of precision and optimal No time-consuming conversion, change CS-X-4.0
sharpening results. The file has a sharpening from left to right tooth by turning the
angle of 30. Defined depth gauge distances device
can be found in the table. Optimized shape for precise control
Files are replaced easily due to the improved
design
Quality tools to sharpen instruments used in forestry for easier and more efficient work
Reduction in costs for expensive manual work with a constant filing performance
201 31
Sharpening files
Depth gauge files
4131
Rectangular file, tanged, with two round uncut Flat chain saw files are used on saw chain Ordering example:
edges and cut on two sides. Shape F according depth gauges. These tools are used without EAN 4007220011041
to DIN 7262. Available in two lengths. sharpeners. 1213 ruk 150 mm H2
32 201
Wood files and rasps
Wood files
201
Wood files
Half-round file, tanged, with special file cut Applications: Ordering example:
on two sides. Shape C according to DIN7263. Surface work EAN 4007220006368
Available in two lengths. Filing of radius areas 1159 200 mm H2
Filing of half-round shapes
Cabinet files
201 33
Wood files and rasps
Wood rasps
Half-round file, tapered, tanged, with rasp cut Applications: Ordering note:
on two sides. Shape C according to DIN 7263. Surface work Type PF is supplied with ergonomic file handle.
Available in various cuts and lengths. Filing of radius areas
Filing of half-round shapes Ordering example:
Chamfering EAN 4007220009598
1552 150 mm H2
Please specify the desired cut.
34 201
Wood files and rasps
Wood rasps
201
Round wood rasps
Cabinet rasps
201 35
Wood files and rasps
Hoof plane and rasp
Hoof plane
Rectangular file, tanged, cut on four sides. Applications: Recommendations for use:
Milled teeth on both sides, one fine side, one Planing of the hoof surface The PFERD horse shoe file can be used with
rough side. File does not become blunt, even Fine finishing of the hoof wall commercial file handles in the correspond-
on nails and iron. Filing of toes ing sizes
Work on horseshoe nails after cutting
Ordering example:
EAN 4007220809631
3515 350 mm
36 201
Wood files and rasps
Special rasps
201
Sculptor's file rasp
Half-round file rasp with two curved ends, Material to be worked: Applications:
each with different cuts (filing cut and rasp Wood Work on carved woodwork, sculptures,
cut). Highly versatile. Horn relief ornaments and casting patterns
Soft stones
Plastics
File rasp with two half-round curved ends with Material to be worked: Applications:
rasp cut on the outer radius and filing cut on Wood Refining of handrails, ornaments, carved
the inner radius. Highly versatile. Plastics woodwork, sculptures and casting patterns
Soft stones Work on hard-to-reach places
Horn
201 37
Wood files and rasps
Needle rasps
Needle rasps are ideal for use in hard-to-reach Recommended application: Ordering example:
places, e.g. ornaments, casting patterns, Because of their forged shanks, needle files EAN 4007220346006
carved woodwork and sculptures. can be used with or without a file handle 2506 140 mm H2
Flat
Hand
Three square
Square
38 201
Wood files and rasps
Needle rasps
201
Round
Half-round
201 39
Precision files
Cut table
PFERD precision files meet the most exacting ing, shaping, forging and stamping serial Ordering note:
standards of dimensional accuracy, cutting articles etc. Packaging unit: 12 piece
performance and longevity. Compared to
machinists files, precision files are smaller, In addition, precision files are suitable for Ordering example:
easier to handle, and possess a more precise assembling tasks and building complex EAN 4007220279595
geometry. devices and machines to the highest precision 800 100 mm H00
standards. The cross section is measured at the Please specify the desired cut.
They are used in the jig and tool construction uncut part of the file.
fields, in particular to produce tools for punch-
40 201
Precision files
Precision files, tanged
201
Pillar files, regular
201 41
Precision files
Precision files, tanged
42 201
Precision files
Precision files, tanged
201
Tang files, knife
201 43
Precision files
CORINOX files
These files have an exceptional surface hard- Due to their high surface hardness grade, Available in six different shapes and three dif-
ness grade of 1,200 HV (Vickers scale). Particu- CORINOX files are extremely wear-resistant ferent lengths.
larly suitable for work on stainless steel (INOX) and tough. They are ideally suited for work on
e.g. V2A, V4A, very heat-resistant steels, exotic materials which are hard to file. They do not Ordering example:
alloys but also fibre-reinforced plastics etc. clog up. Chips can be removed by knocking EAN 4007220304082
the file gently against a hard object. COR 800 150 mm H00
Please specify the desired cut.
44 201
Precision files
CORINOX files
201
CORINOX files, square
2301
2307
2308
2310
2302
These files have an exceptional surface hard- Due to their high surface hardness grade, Recommendations for use:
ness grade of 1,200 HV (Vickers scale). They CORINOX files have outstanding wear-resist- Due to their forged tang, these files can be
are particularly suitable for fine and delicate ance and durability. They are ideal for work on used with or without a needle file handle
work on stainless steel material (INOX) e.g. materials which are hard to file. They do not
V2A, V4A, very heat-resistant steels and exotic clog up. Chips can be removed by knocking Ordering example:
alloys, but also for fibre-reinforced plastics. the file gently against a hard object. EAN 4007220346532
With their high precision, these files meet the CORINOX 2306 180 mm H0
highest standards of quality and stock removal Available in various shapes and cuts. Please specify the desired cut.
performance.
201 45
Precision files
Needle files
PFERD needle files are ideally suitable for work Ordering note: Ordering example:
on the smallest surfaces, breakthroughs, ge- Needle-file cuts 00, 0, 1, 2, 3, 4, which are not EAN 4007220237458
ometries, profiles and radii. Due to their forged listed in the table, are not supplied from stock. 2406 140 mm H0
tang, these files can be used with or without a The delivery time for these files is approxi- Please specify the desired cut.
needle file handle. mately 8 weeks.
Flat
Hand
Crossing
Three square
46 201
Precision files
Needle files
201
Square
Round
Knife
Half-round
Barrette
201 47
Precision files
Needle files
Crossing oval
48 201
Precision files
Needle file sets
201
Contains an application-oriented selection Round (2410)
Needle file sets
of needle files. Supplied in PVC roll pouch or Knife (2405)
handy plastic box. Half-round (2402)
Barrette (2411)
Contents: Flat with rounded edges (2415)
12 pieces, Hand with rounded edges (2416)
1 needle file each of the profiles: Crossing oval (2409)
Flat (2406)
Hand (2401) Ordering example:
Crossing (2403) EAN 4007220235539
Three square (2407) 266/14 140 mm H1
Square (2408) Please specify the desired cut.
266 NFB
Contains an application-oriented selection of The set consists of one needle file each of the
Needle file set
PFERD needle files. Supplied in a handy protec- profiles:
tive box. Hand
Flat
Half-round
Triangular
Square
Round
Length 160 mm, cut 1.
201 49
Precision files
Handy files
Handy files
2601
2607
2608
2602
Precision files similar to needle files. These files They are available in various profiles and cut Applications:
are suitable forwork in the narrowest and densities. These files can also be ordered in Refining of press tools
most hard-to-reach places on metals and plas- sets. Refining of forging tools
tic objects, e.g. in tool, die and mould making. Refining of foundry tools
Characteristics similar to
These files are characterized by their slim and DIN 7283 (shapes, lengths, cross sections) Ordering example:
precise geometry. The files are strongly tapered DIN 7285 (terminology) EAN 4007220346372
but rugged enough for higher filing pres- DIN 7284 (technical specifications) 2601 215 mm H00
sures. Hardened by advanced heat treatment DIN 8349 (numbers of cuts) Please specify the desired cut.
methods. Used without a file handle due to
their forged tang.
50 201
Precision files
Riffler files, riffler rasps
201
Riffler files series 900P952P
900P
901P
910P
911P
913P
914P
915P
916P
917P
918P
920P
930P
931P
940P
941P
942P
943P
952P
Length 150 mm, smallest type of riffler files. Recommendations for use: Ordering example:
Can be used with or without a riffler file EAN 4007220346075
holder 900P 150 mm H2
Please specify the desired cut.
201 51
Precision files
Riffler files, riffler rasps
955P
956P
961P
963P
964P
965P
972P
973P
974P
980P
981P
982P
983P
984P
985P
986P
988P
996P
Length 150 mm, smallest type of riffler files. Recommendations for use: Ordering example:
Can be used with or without a riffler file EAN 4007220015155
holder 954P 150 mm H2
Please specify the desired cut.
52 201
Precision files
Riffler files, riffler rasps
201
Riffler files series 710P795P
710P
711P
712P
713P
731P
732P
741P
750P
761P
762P
763P
764P
781P
790P
795P
Length 180 mm, medium-sized type of riffler Recommendations for use: Ordering example:
files. Can be used with or without a riffler file EAN 4007220014752
holder 710P 180 mm H0
Please specify the desired cut.
201 53
Precision files
Riffler files, riffler rasps
411P
412P
430P
440P
450P
460P
470P
480P
Length 300 mm, largest type of riffler files. Recommendations for use: Ordering example:
Can be used with or without a riffler file EAN 4007220345818
holder 410P 300 mm H0
Please specify the desired cut.
54 201
Precision files
Riffler files, riffler rasps
201
Riffler rasps series 701P708P
701P
702P
703P
704P
705P
706P
707P
708P
Length 190 mm, riffler rasps with high-preci- Recommendations for use: Ordering example:
sion Swiss cut. Can be used with or without riffler file EAN 4007220346280
holder. 701P 190 mm H0
720P 190 7 1/2 0 535905 8 701P, 702P, 703P, 704P, 705P, 706P, 707P, 708P 1
201 55
File handles, file sleeves, file brush
File handles
Plastic file handles for good control and trans- Available in four different designs and two
Plastic file handles
mission of force. packaging units.
PH 8 Advantages: Ordering example:
PH 9 Wide collar guarantees fatigue-free work EAN 4007220015476
and increases safety PH 08/10
Good force transmisson and control of the
PH 11
file
Air chambers help absorb hand moisture
PH 13 File handle made from sturdy plastic
56 201
File handles, file sleeves, file brush
Quick-mounting type
201
Quick-mounting handle for needle files, Ordering example:
Plastic file handle, quick-mounting type
diamond files and smaller machinist's and EAN 4007220806555
precision files. SH 220
File tangs are reliably clamped by twisting the
two halves of the handle.
NFH 212
201 57
File handles, file sleeves, file brush
File brush
58 201
Hand deburrer
Hand deburrer
201
Hand deburrer for efficient deburring, cham- PFERD offers:
Hand deburrer
fering and refining of different materials and Three deburring blades for work on
contours. Hard-to-reach places, holes, inner -- steel, aluminium
and outer diameters, threads and keyways can -- non-ferrous metals and cast iron H4
be easily worked on by hand. -- plastics and other hard materials
One mini-blade for general work on very
The three different, easily changeable de- small geometries of different materials
burrers (blades, mini-blades and countersinks) BS 1010
Two pivot-bearing deburring countersinks
are easy to control and use with the special for general use on bores of different
holder. The tools fit outstandingly well with materials BS 1018
the contours of workpieces.
The pivot-mounted adapter system makes Ordering example:
handling and changing the deburrer very easy. EAN 4007220807903 BS 2010
BS 1010
The ergonomic file handle protects hands
against sharp edges and prevents the tool PFERDERGONOMICS:
from rolling away. BD 5010
BC 1041
BC 1651
201 59
Quality tools from a single source
Fine grinding and polishing tools Diamond and CBN tools Grinding and cut-off wheels
60 201