Professional Documents
Culture Documents
620 Series Pumps PDF
620 Series Pumps PDF
United Kingdom Germany Netherlands The information contained in this document is believed
Telephone +44 (0) 1326 370370 Telephone +49 (0) 2183 42040 Telephone +31 (0) 10 462 1688 to be correct, but Watson-Marlow Bredel accepts no
Fax: +44 (0) 1326 376009 Fax: +49 (0) 2183 82592 Fax: +31 (0) 10 462 3486 liability for any errors it contains, and reserves the right
HB0207
Email support@watson-marlow.co.uk Email info@watson-marlow.de Email info@watson-marlow.nl to alter specifications without notice.
www.watson-marlow.co.uk www.watson-marlow.de South Africa WARNING These products are not designed
Belgium Italy Telephone +27 11 796 2960 for use in, and should not be used for, patient
Telephone +32 (0) 2 481 60 57 Telephone +39 030 6871184 Fax: +27 11 794 1250 connected applications.
Fax: +32 (0) 2 481 60 58 Fax: +39 030 6871352 Email info@wmbpumps.co.za Watson-Marlow, Pumpsil, LaserTraceability,
Email info@watson-marlow.be Email info@watson-marlow.it Sweden Bioprene and Marprene are registered trademarks
Brazil www.watson-marlow.it Telephone +46 8 556 556 00 of Watson-Marlow Limited
Telephone +55 11 4616 0404 Korea Fax: +46 8 556 556 19
Fax: +55 11 4616 0403 Telephone +82 (0) 2 525 5755 Email info@watson-marlow.se
Email info4brazil@watson-marlow.com Fax: +82 (0) 2 525 5764 www.watson-marlow.se
www.watson-marlow.com.br Email support4k@watson-marlow.co.uk United States of America
China www.watson-marlow.co.kr Telephone 800 282 8823
Telephone +86 21 6485 4898 Malaysia Fax: 978 658 0041
Fax: +86 21 6485 4899
Email info@watson-marlow.cn
www.watson-marlow.com.cn
Telephone +60 (3) 5635 3323
Fax: +60 (3) 5635 7717
Email sales@my.SpiraxSarco.com
Email support@wmbpumps.com
www.watson-marlow.com 620 SERIES PUMPS
France www.watson-marlow.co.uk
Telephone +33 (0) 2 37 38 92 03
Fax: +33 (0) 2 37 38 92 04
Email info@watson-marlow.fr
Members of the Spirax-Sarco Engineering Group
NEW Controlled power
www.watson-marlow.fr
Chem-Sure 965.0064.032 965.0096.032 965.0127.032 965.0159.032 965.0120.SST 965.0170.SST 620RE MkII Two roller pumphead for 4.0mm wall 063.4231.000
element tubing, 0-4bar
Bioprene TM 903.P120.PFT 903.P170.PFT
620RE4 MkII Four roller pumphead for 4.0mm wall 063.4431.000
Bioprene TL 903.0064.032 903.0096.032 903.0127.032 903.0159.032 903.0120.PFT 903.0170.PFT element tubing, 0-4bar
Marprene TM 902.P120.PPC 902.P170.PPC 620L Low pulse, twin channel, 6 roller pumphead 063.4603.000
Marprene TL 902.0064.032 902.0096.032 902.0127.032 902.0159.032 902.0120.PPC 902.0170.PPC for 4.0mm wall tubing, 0-2bar
Pumpsil silicone 913.A064.032 913.A096.032 913.A127.032 913.A159.032 913.A120.PFT 913.A170.PFT 913.A120.PPC 913.A170.PPC 620LG Low pulse, twin channel, 6 roller pumphead 063.4623.000
Neoprene 902.0064.032 920.0096.032 920.0127.032 920.0159.032 920.0120.PPC 920.0170.PPC for 4.0mm wall Sta-Pure tubing, 0-4bar
Continuous tubing for 620L pumpheads Y-elements tubing for 620L pumpheads
Tube bore Tube bore
8.0mm
Pumpsil silicone 913.A080.040
12.0mm
913.A120.040
16.0mm
913.A160.040
8.0mm
913.AE80.K40
12.0mm
913.A12E.K40
16.0mm
913.A16E.040
IP66
Marprene 902.0080.040 902.0120.040 902.0160.040 902.E080.K40 902.E120.K40 902.E160.040
Bioprene
Neoprene
Sta-Pure
903.0080.040
920.0080.040
903.0120.040
920.0120.040
620LG pumpheads only
903.0160.040
920.0160.040
903.E080.K40
920.E080.K40
960.E080.K40
903.E120.K40
920.E120.K40
960.E120.K40
903.E160.040
920.E160.040
960.E160.040
LISTED
IP31
Chem-Sure 620LG pumpheads only 965.E080.K40 965.E120.K40 965.E160.040
Feature 620S 620U 620Du 620Di Call +44 (0) 1326 370 370
Manual control for further information on the 620
Run/stop; speed adjustment; forward/reverse; max key for pump range including technical
rapid priming and purging; auto-restart
Simple calibration to display flow rate data sheets. 18 litre/min;
Choice of flow rate display; metric or imperial units
MemoDose one-shot dispensing
Specialist dispensing control software
Numeric keypad for entry of speed, flow or PIN
or log on to our web site: 4 bar;
Remote control www.watson-marlow.co.uk
Run/stop direction change; auto/manual mode, leak detector
input (via contact closure or 5V TTL to 24V industrial logic)
to view details on our complete Industrial
Remote switch operation of MemoDose peristaltic pump range.
Remote operation of dosing programmes
Analogue speed control
strength
Software programmable inputs; 0-10V, 1-5V or 4-20mA Watson-Marlow Bredel Pumps
Analogue outputs; 0-10V, 4-20mA or 0-1478Hz
Digital network control
RS485 through 620N module (IP66)
620DiN
Falmouth pumps with
Cornwall TR11 4RU
RS232 via 9-pin D-connector (IP31)
Process security and record keeping
Basic security code to protect set-up
620Du 620Di
England
unrivalled
Pin-secure Process Protection; two level PIN access
Batch records
Pumphead options (620R and 620L pumpheads are not interchangeable)
Tel: +44 (0) 1326 370 370
Fax: +44 (0) 1326 376 009
precision
620R, 620RE and 620RE4 MkII pumpheads
620L and 620LG pumpheads support@watson-marlow.co.uk
Enclosure options
IP31 wipe-down or IP66 hose-down (with 620N module) www.watson-marlow.co.uk
8125_WM620_Hi_9/05 10/3/05 3:41 PM Page 3
Industrial strength pumps with unrivalled precision The new 620 series
At Watson-Marlow Bredel ...
620 pumping power We engineer our winning performance we dont
just turn up the speed. 60% fewer occlusions
than our competitors for the same flow means
at your fingertips
21/2 times the tube life.
1
8125_WM620_Hi_9/05 10/3/05 3:41 PM Page 5
620U for remote control Start/Stop and Direction, but also speed:
you can scroll though the full speed range
with the Up and Down keys. MemoDose
opens the one-shot dispensing facility;
The 620S (IP31) and 620SN (IP66) for hassle-free pumping: Industrial Menu gives access to the pumps set-up;
connectivity is
Manual control via 9-key display pad easy: plug in the Max runs the pump at full speed for easy
D-connectors and priming. Other functions include Keypad
Simple calibration to display flowrate the 620U is instantly
lock, display illumination and Auto-restart.
ready for remote
MemoDose for easy, powerful one-shot dispensing control. The 620UN The 620Us keypad allows quick changing
(inset) goes one step between automatic and manual control.
further: easy permanent
The 620U and 620UN add multiple control options: connection and complete
IP66 washdown security
Analogue speed control (0-10V or 4-20mA inputs) with four relay outputs Remote control
Remote control via industrial logic with digital The 620U and 620UN can also be
status outputs controlled using contact-closure or logic
input (5V TTL to 24V industrial) for remote
0-10V or 0-1478Hz analogue speed feedback Start/Stop, Direction changes, Auto/Man
mode selection and leak detection. Speed
Tough, rugged, powerful: 620 pumps are ideally qualified for a can be controlled using a 0-10V or 4-20mA
lifetime of use in industry. Quick tube-change means that one 4 analogue input, and monitored via 0-10V or
pump can perform many tasks without contamination and 0-1478Hz analogue signal output. Four
time-wasting cleaning. digital status outputs are available for
process monitoring.
620 pumps offer sophisticated, but simple, controllability. Speed
can be adjusted from 0.1rpm to 265rpm. The wipe-clean keypad
gives instant access to every function. The 620 is logical to
program and easy to manage, from speed and direction through
to (with the 620U) straightforward set-up of analogue remote
control for automatic operation and monitoring.
2 3
8125_WM620_Hi_9/05 10/3/05 3:42 PM Page 7
CTION
-
PIN
Full industry-standard connectivity is
available in both the IP31 and the IP66
PR
TE
module offers RS485 and easy-wire
CE O
O
relays. The IP31 620Du uses a 9-pin
As well as the features of the 620U, the 620Du (IP31) and SS PR D-connector for RS232 communication.
620DuN (IP66) adds:
PIN-secure Process Protection (PPP): safeguard your Status outputs
process with two levels of set-up security
The 620Du offers
Digital network control using RS485 or RS232 four configurable
digital status outputs
Numeric keypad for direct entry of flow and pump settings (24V relay outputs on
Twin analogue inputs for simultaneous flow adjustment with the 620DuN),
two signals (supersedes stroke adjustment on allowing monitoring
and processing of:
diaphragm pumps)
Run/Stop; Direction
Wide choice of metric or US flow units; easy of rotation; Auto/Manual mode of
calibration for precise metering operation; general fault alarm; guard-open
safety shutdown; or leak-detected
shutdown (if used with a Watson-Marlow
The 620Du is the top-of-the-range pump for process and
Bredel leak sensor).
production, with built-in control and integration options that are
second to none: whatever your production system, the 620Du
fits perfectly, bringing instant power and precision to the Speed scaling
production line.
Programmable twin analogue inputs
The 16-key numeric keypad makes manual control truly simple. allow you to over-ride the main speed
Want a specific speed or flowrate? Dial it in and thats it. control. This makes stroke adjustment on
In addition, analogue or digital network control is easy to a diaphragm pump redundant: the
set-up with an intuitive menu system. 620Du is the perfect drop-in
diaphragm pump replacement.
CTION
-
PIN
keep your set-up safe, giving assurance of
pH control, antifoam treatment and harvesting duties. The
production quality. Top-level PIN code
requirements of regulatory agencies, such as the cGMP from
holders can retain complete control over
PR
TE
the FDA, are satisfied by the exclusive functionality of the
CE O the pumps configuration; or calibration
O
flagship 620Du.
The option of two 620R pumphead orientations and a 50% SS PR duties can be released to production staff
The Watson-Marlow Bredel product range has a common control smaller footprint, plus flows from 1ml/min to 18 litre/min with second-level PIN access. Alternatively, the
methodology. As a result, up-scaling is straightforward. make it easy to incorporate the new 620 into compact keypad can be disabled, so that control is
A validated research process on a pilot scale Watson-Marlow skids and contract manufacturing applications where limited to Start/Stop and accidental key-
Bredel 300 series pump can easily be up-scaled to bulk flexibility is paramount. presses are eliminated.
4 manufacturing with the new 620 series. 5
8125_WM620_Hi_9/05 10/3/05 3:43 PM Page 9
The specialist dispensing pump with dedicated, easy-to-program software Heart of a process filling line
Integration
620Di: the power The 620Di is designed with two functions in
mind: as a stand-alone dispensing unit; and
as a fully integrated part of a filling line. The
The principle of ramping
Deceleration period
Acceleration period
to dispense precisely
wide-ranging industrial logic I/O control
options and serial communications allow the Motor running
flexibility for the pump to be linked to other at constant speed
filling equipment via a PLC
of motor
of motor
Motor speed
The 620Di (IP31) and 620DiN (IP66) is a specialist 50 programs
increases
dispensing pump, designed to function as an PU
T BATC
H Store 50 dispensing programs for immediate
automatic, programmable dispenser able to output UT use, complete with batch size, dose size,
RE
O
flow speed and dosing interval. You can even
cG
COR S
batch records for cGMP requirements.
FOR cGM
save the ramp and drip settings. Need a
MP variation? Instant changes are easy.
Time
D
Accurate, fast dispensing. Dispenses 500ml in The 620Di can be set to ramp up to full
3.5 seconds with 0.5% accuracy
TS
speed at the start of a dose and ramp down
P
RE N
Q UIR E ME
Calibration by weight or volume, metric or US to zero speed at the end. The slope of each
ramp can be independently adjusted.
units; calibration without disturbing batch dispensing
Ramping aids accuracy and allows filling to
Dose triggered by timed interval, keypad, remote signal start and stop at speeds which avoid
or additional footswitch, handswitch or proximity switch splashing or foaming, but still allows the
highest speed to be used for the main part of
PIN-secure Process Protection (PPP): safeguard your the dose. So filling is faster. End-of-dose drips
process with two levels of set-up security are easily avoided using the pumps anti-drip
feature: a momentary direction reverse at the
Stores 50 dispensing programs end of each dose.
T BATC
PU H
Ease of use meets dispensing perfection in the powerful 620Di. UT
RE
O
cG
COR S
Batch records satisfy the requirements of cGMP; simply add a PC
FOR cGM
and details of dispensing jobs are recorded for display or printing.
MP
D
Production records were never so simple.
TS
P
RE N
Peristaltic pumps bring huge advantages to the dispensing line: Q UIR E ME
620R
Dispensing performance for
620 series pumpheads 620RE4 620L Dosing batch records
Dispense volume against time 620R Dispense volume against time 620RE4 Dispense volume against time 620L The RS232-enabled 620Di allows the details
10 Recommended tube sizes 10 Recommended tube sizes 10 Recommended tube sizes of every dispensing batch to be named and
Accuracy 0.2 0.5 1.0 2.0 5.0 Accuracy 0.2 0.5 1.0 2.0 5.0 Accuracy 0.2 0.5 1.0 2.0 5.0
15.9 x 3.2mm 8
ltrs ltrs ltrs ltrs ltrs
17.0 x 4.0mm 8
ltrs ltrs ltrs ltrs ltrs
16.0 x 4.0mm 8
ltrs ltrs ltrs ltrs ltrs recorded. When a computer (or RS232-
Bore 6.4 6.4 9.6 12.7 15.9 Bore 12.0 17.0 17.0 17.0 17.0 Bore 12.0 16.0 16.0 16.0 16.0
12.7 x 3.2mm 0.5% mm mm mm mm mm LOADSURE element 0.5% mm mm mm mm mm Y element 0.5% mm mm mm mm mm compatible controller) is connected, batch
Dose 3.7 9.4 8.3 10.9 20.0 Dose 1.4 2.7 5.5 10.9 27.3 12.0 x 4.0mm Dose 1.4 2.6 5.2 10.4 26.0
9.6 x 3.2mm 6 time secs secs secs secs secs 6 time secs secs secs secs secs 6 time secs secs secs secs secs records are exported, providing a complete
Time s
Time s
Time s
Bore 6.4 9.6 12.7 15.9 15.9 Bore 17.0 17.0 17.0 17.0 17.0 Y element Bore 16.0 16.0 16.0 16.0 16.0
6.4 x 3.2mm
1.0% mm mm mm mm mm 12.0 x 4.0mm 1.0% mm mm mm mm mm 1.0% mm mm mm mm mm audit trail to satisfy modern manufacturing
4 Dose 3.7 4.2 5.5 8.0 20.0 LOADSURE 4 Dose 1.1 2.7 5.5 10.9 27.3 4 Dose 1.0 2.6 5.2 10.4 26.0
time secs secs secs secs secs element time secs secs secs secs secs 8.0 x 4.0mm time secs secs secs secs secs requirements (including cGMP requirements).
Bore 12.7 15.9 15.9 15.9 15.9 Bore 17.0 17.0 17.0 17.0 17.0 Y element Bore 16.0 16.0 16.0 16.0 16.0
2 2.0% mm mm mm mm mm 2 2.0% mm mm mm mm mm 2 Batch records include operator and batch
2.0% mm mm mm mm mm
Dose 1.1 2.0 4.0 8.0 20.0 Dose 1.1 2.7 5.5 10.9 27.3 Dose 1.0 2.6 5.2 10.4 26.0 names, pump type, dose size, batch size,
time secs secs secs secs secs time secs secs secs secs secs time secs secs secs secs secs
0.01 0.10 1.00 10.00 0.01 0.10 1.00 10.00 0.01 0.10 1.00 10.00 start date and time, batch progress and pump
Dispense volume (litres) Dispense volume (litres) Dispense volume (litres)
parameters such as ramp and drip control.
Pumping time per dose: accuracy = within 0.5% = within 1.0% = within 2.0% = within 5.0% Recommended tube sizes (based on 265rpm)
comparet, errat. Si quaedam nimis antique, si peraque dure dicere credit 15.9mm
12.4
eos, ignave multa fatetur, et sapit et mecum facit et Iova iudicat aequo.
16.0mm 11 11
10 10 12mm 10 12.7mm
Ste quidem veteres inter ponetur honeste,12.0mm qui vel9.0
mense brevi vel toto 7.2
9.6mm
With two parallel tubes, the 620L
est iunior
5
anno. Utor permisso, caudaeque pilos ut 5.2 equinae paulatim5 5 Tube clamps hold the tubing in place
8.0mm
pumphead becomes a twin-channel unit; vello unum, demo etiam unum, dum cadat elusus ratione qui deperiit 6.4mm 3.4 when the 620R pumphead is used
alternatively, two tubes can be used to with continuous tubing
Limited to 2bar below 50rpm minor uno mense vel anno, inter Limited to 2bar below 50rpm
draw viscous fluid more easily from its 0 0 0 0
0.1 50 100 150 200 265 0.1 50 100 150 200 265 0.1 50 100 150 200 265
source, discharging it through a Drive speed (rpm) quos referendus erit? Veteresne Drive speed (rpm) Drive speed (rpm)
Y-connector as a single pulseless flow NB: reduce flow rate by 15-30% for 620RE4
poetas, an quos et praesens et postera respuat aetas?
Note: 620L and 620R pumpheads are not interchangeable: each requires its own dedicated drive
8 9