FUGRO TECHNICAL SERVICES LIMITED
ipsa Cot 10524802258
Sime Seen Taltam 5 Ngee Saco ence MateriaLab
freon bate
Report No. : 141695EN140507(2)
Page 1 of 1
‘Test Report on Analysis of Paint
Information Supplied by Client
Client B&S Group Holdings Limited
Client's address Room 402-403, Winning House,
10-16 COCHRANE Street Central HK
Project Tee
‘Sample description Rte CPE ETE
‘Sample identification BSM 903
Test required 2 Through dry time
Laboratory Information
Lab sample ID EN140507/1
Date of receipt of sample : 12/05/2014
Date test completed 22/05/2014
Test method used BS EN ISO 9117-3: 2010
Results
Through dry time, min
Average wet film thickness of test specimen, ym 50-55
Average dry film thickness of test specimen, ym
Remarks :
41. Thinning Ratio — No dilution.
2. Single coating of paint was applied manually to chromated aluminium panel using a SQum bar for the
test
3. The wet film thickness was measured with reference to BS 3900 : C5 : 1997 Method 1A using a comb
gauge.
4. The dry film thickness was measured with reference to BS 3900 : C5 : 1997 Method 7.
5. The coated test panel was allowed to dry in a vertical position with free circulation of air, but shielded
from draughts and direct sunlight, at a temperature of 23 + 2 °C and 50 +5 % RH.
‘Supervised by K. F. Wong Certified by
proved Signatory: HO Kin Man, John
Manager - Chemistry Department
Date Waleare
* End of Report
Note : This report refers only to the sample(s) tested.
‘The copy ofthis documents owned by Fuge Techical Senices Lind, tay nt be reproduce
Comons: