Professional Documents
Culture Documents
Mensuration Formulas For SSC and Banking in PDF Part 2
Mensuration Formulas For SSC and Banking in PDF Part 2
Mensuration Formulas For SSC and Banking in PDF Part 2
In this sheet of Mensuration Formulas in PDF, we will take different figures and
mention all the important formulas related to it. This way you wont get confused. We
are also including diagrams so that you can create a mental picture of it and remember
it well.
What follows is the part 2 of these Mensuration Formulas for SSC and Banking. Part 2
deals largely with 3D figures. You can also download Part 1 from the link given below.
1|Page
Total surface area of cuboid = 2 (lb + bh + lh)
Length of diagonal of cuboid = 2 + 2 + 2
Volume of cuboid = l b h
Volume of cube = a3
Total surface area of cube = 6a2
Length of Leading Diagonal of Cube = a3
2|Page
Slant height of a cone = l = 2 + 2
Curved surface area of a cone = C = r l
Total surface area of a cone = r (r + l)
1
Volume of right circular cone = 2
3
3|Page
12. Mensuration Formulas for SPHERE
In the following formulae, r = radius of sphere, d = diameter of sphere
2
Volume of a hemisphere = 3
3
Curved surface area of a hemisphere = 2r2
Total surface area of a hemisphere = 3r2
4|Page
Volume of hollow cylinder = h(R2- r2)
(Where, R = radius of cylinder, r = radius of cavity, h = height of cylinder)
In the following formulae, R = radius of the base of the frustum, r = radius of the top of the
frustum,
If a cone is cut by a plane parallel to the base of the cone, the lower part is called the frustum
of the cone.
Slant height of the frustum = = 2 + ( )2
Curved surface area of frustum = (R + r)l
Total surface area of frustum = (R + r) l + (R2 + r2)
1
Volume of the frustum = 3 ( 2 + 2 + )
5|Page
Prism consists of two polygonal bases which are parallel to each other.
These bases are joined by lateral faces, which are perpendicular to the polygonal bases.
The number of lateral faces is equal to the number of sides in the polygonal base. Thus, the
base of a prism could be of various shapes, namely, triangular, quadrangular, pentagonal etc.
Volume of prism = Base area height
Lateral surface area of prism = perimeter of base height
Total surface area of prism = Lateral surface area + (2 base area)
Pyramid consists of a polygonal base and triangles at its sides. These triangles are called
faces.
The base could be of any shape, whereas the faces are generally isosceles triangles.
All these triangular faces meet in a single point called the apex.
Total surface area of pyramid = base area + (number of sides slant height base
length)
1
Volume of pyramid = 3
6|Page