Teka Turbine-type Mixers THZ are pan mixers available in sizes from 250 to 5250 liters. The mixing pan and walls are protected by wear liners made of steel or other abrasion-resistant materials. Spring-loaded mixing arms mounted in the rotor head can be adjusted for wear and enhance mixing. The centrally located planetary gearbox is driven by a motor and hydraulic pump operates the discharge gates. Various options are available for special applications and mixing tools.
Teka Turbine-type Mixers THZ are pan mixers available in sizes from 250 to 5250 liters. The mixing pan and walls are protected by wear liners made of steel or other abrasion-resistant materials. Spring-loaded mixing arms mounted in the rotor head can be adjusted for wear and enhance mixing. The centrally located planetary gearbox is driven by a motor and hydraulic pump operates the discharge gates. Various options are available for special applications and mixing tools.
Teka Turbine-type Mixers THZ are pan mixers available in sizes from 250 to 5250 liters. The mixing pan and walls are protected by wear liners made of steel or other abrasion-resistant materials. Spring-loaded mixing arms mounted in the rotor head can be adjusted for wear and enhance mixing. The centrally located planetary gearbox is driven by a motor and hydraulic pump operates the discharge gates. Various options are available for special applications and mixing tools.
Teka Turbine-type Mixers THZ are pan mixers available in sizes from 250 to 5250 liters. The mixing pan and walls are protected by wear liners made of steel or other abrasion-resistant materials. Spring-loaded mixing arms mounted in the rotor head can be adjusted for wear and enhance mixing. The centrally located planetary gearbox is driven by a motor and hydraulic pump operates the discharge gates. Various options are available for special applications and mixing tools.
available in sizes from 250 to 5250 liter filling capacities. The mixing pan floor and the outer walls are protected by exchangeable wear liners made of A.R. steel plate. For special applications, liners made of chill- cast floor tiles and other materials are available.
The spring-loaded mixing arms are
mounted in the rotor head, and are adjustable to compensate for wear. This, plus their various angles-of attack enhance the mix-effect, reduce wear, and protect the drive from shock.
Depending on the appliction, mixing
paddles, wall scrapers, and mixing arm wear guards made of various abrasion- resistant materials are available.
The centrally located planetary gearbox
is driven by a 3-phase TEFC motor, which is flange-mounted directly to the gearbox, in the case of THZ 375 to THZ 1125 mixers, and connected by a double universal joint driveshaft on THZ 1500 to THZ 5250 models. A hydraulic turbocoupling for soft starts under load is available also. Flanged to the gearbox, and driven by it, is a hydraulic gear pump which constantly cycles the oil, and supplies the pressure to operate the discharge gate(s). The THZ 250 employs permanently lubricated, flange gear motors for drive and discharge functions. The discharge gate assembly, used to remove the batch from the mixer, is a complete component bolted to the mixer plan floor. The semi-circular gate is hydraulically operated by means of a rotating piston cylinder. It is electrically controlled, and can be opened to any degree desired. Locating the pivot-point of the gate slightly inside the pan circumference allows for a large opening and,thereby, a fast discharge. Mixers THZ 375 to THZ 1125 may be equipped with up to 4 gates, whereas 3 gates is the maximum for THZ 1500 to THZ 5250.
A protective cover encloses the mixer on
top. A built-in seal makes it near- dustproof. With no components located above the pan cover, there are no obstructions to impede the arrangement of cleaning segments, inspection doors, material inlets, etc. into the mixing pan. Large, hinged segments are possible, raised and lowered by a manual- or motorized cable winch.
Depending on the plant design, charging
the mixer by means of a skip hoist is available. Teka offers tilting skip hoists, as well as the nontilting, bottom discharge type. Standard inclinations of the hoist track is 60. Inclinations from 45 to 90 may be specified. Teka turbine mixers offer more mixing possibilities: Optional equipment includes intensive agitator(s) using various mixing tools. Retrofitting of agitators is possible. Moisture and consistency metering by means of floor-mounted, wall-mounted, or rotating electronic probes. Steam-injection through rotating lances, or through stationary nozzles. Mixer doubling as weigh-bin when mounted on load cells. High-pressure cleaning with rotating water spray nozzles.
TEKA Turbine-type mixers
THZ with agitators are pan mixers for batching operations and are available in sizes from 250 to 5250 liter filling capacities. Two kinds of TEKA intensive mixers with constant-speed mechanical drive are available: those with one agitator in a range of sizes from 250 to 1125 liters load capacity, and those with two agitators, that run in the same direction, in a range of sizes from 1500 to 5250 liters load capacity. The agitator drive is driven by the main mixer drive. For special applications, the speed at which the agitator rotates can be changed by using a different pulley. A frequency converter can be used to change the drive speed and therefore the speed at which the agitator rotates, for procedures such as charging and discharging. Two kinds of TEKA Intensive mixers with variable-speed hydraulic agitator drive are available: those with one agitator, in a range of sizes from 250 to 5250 liters load capacity and those with two agitators, in a range of sizes from 1500 to 5250 liters load capacity. The speed at which the agitators rotate is infinitely variable and the direction of rotation can be changed. During charging and discharging each churner runs at no-load. The agitator drives are driven by a separate, additional hydraulic power source. The mixing pan floor and the outer walls are protected by exchangeable wear liners made of A.R. steel plate. For special applications, liners made of chill-cast floor tiles are available. The spring-loaded mixing arms are mounted in the rotor head and are adjustable to compensate for wear. This plus their various angels-of- attack enhance the mix-effect, reduce wear and protect the drive from shock. Depending on the application, mixing paddles, wall scrapers and mixing arm wear guards made of various abrasion- resistant materials are available. The centrally located Flanged to the gearbox and driven by it, is a planetary gearbox is driven by hydraulic gear pump which constantly cycles a 3-phase TEFC motor, which the oil and supplies the pressure to operate is flange-mounted directly to the discharge gate(s). the gearbox, in the case of THZ 375 to THZ 1125 mixers and connected by a double universal-joint driveshaft on THZ 1500 to THZ 5250 models. A hydraulic turbo- coupling for soft starts under load is available also. The THZ 250 employs permanently lubricated, flange gear motors for drive and discharge functions. The discharge gate assembly, used to remove the batch from the mixer, is a complete component bolted to the mixer pan floor. The semi-circular gate is hydraulically operated by means of a rotating piston cylinder. It is electrically controlled and can be operated to any degree desired. Locating the pivot-point of the gate slightly inside the pan circumference allows for a large opening and thereby a fast discharge.
Mixers THZ 375 to THZ 1125
may be equipped with up to 4 gates, whereas 3 gates is the maximum for THZ 1500 to 5250. A protective cover encloses the mixer on top. A built-in seal makes it near-dustproof. With no components located above the pan cover, there are no obstructions to impede the arrangement of cleaning segments, inspection doors, material inlets, etc. into the mixing pan. Large, hinged segments are possible, raised and lowered by a manual-or motorized cable winch. Depending on the plant design, charging the mixer by means of a skip hoist is available. TEKA offers tilting skip hoists as well as the non- tilting bottom discharge type. Standard inclination of the hoist track is 60. Inclinations from 45 to 90 may be specified.
TEKA turbine mixers offer
more mixing possibilities: Optional equipment includes intensive agitator(s) using various mixing tools. Retrofitting of agitators is possible. Moisture and consistency metering by means of floor- mounted, wall-mounted, or rotating electronic probes. Steam-injection through rotating lances, or through stationary nozzles. Mixer doubling as weigh-bin when mounted on load cells. High-pressure cleaning with rotating water spray nozzles. Teka Turbine-type Mixers THZ are pan mixers for batching operations, and are available in sizes from 250 to 5250 liter filling capacities. The mixing pan floor and the outer walls are protected by exchangeable wear liners made of A.R. steel plate. For special applications, liners made of chrome-nickel alloyed or rust-free steel, hard-faced steel (VP) and Hardox 500 steel are also available.
The spring-loaded mixing arms are
mounted in the rotor head, and are adjustable to compensate for wear. This, plus their various angles-of attack enhance the mix-effect, reduce wear, and protect the drive from shock.
Depending on the appliction, mixing
paddles, wall scrapers, and mixing arm wear guards made of various abrasion-resistant materials are available. These include cast iron W4, with complete tungsten carbide surface, polyurethane - elastomere (PU) and nickel-free special casting.
The centrally located planetary
gearbox is driven by a 3-phase TEFC motor, which is flange- mounted directly to the gearbox, in the case of THZ 375 to THZ 1125 mixers, and connected by a double universaljoint driveshaft on THZ 1500 to THZ 5250 models. A hydraulic turbocoupling for soft starts under load is available also.
Flanged to the gearbox, and driven
by it, is a hydraulic gear pump which constantly cycles the oil, and supplies the pressure to operate the discharge gate(s). The THZ 250 employs permanently lubricated, flange gear motors for drive and dischange functions.
The discharge gate assembly, used
to remove the batch from the mixer, is a cpmplete component bolted to the mixer pan floor. The semi-circular gate is hydraulically operated by means of a rotating piston cylinder. It is electrically controlled, and can be opened to any degree desired. Locating the pivot-point of the gate slightly inside the pan circumference allows for a large opening and,thereby, a fast discharge.
Mixers THZ 375 to THZ 1125 may
be equipped with up to 4 gates, whereas 3 gates is the maximum for THZ 1500 to THZ 5250.
A protective cover encloses the
mixer on top. A built-in seal makes it near-dustproof. With no components located above the pan cover, there are no obstructions to impede the arrangement of cleaning segments, inspection doors, material inlets, etc. into the mixing pan. Large, hinged segments are possible, raised and lowered by a manual- or motorized cable winch.