Scribd Logo
Upload

Welcome to Scribd!

  • 26 views

    Excel Beton 1 Pak Taufik

    Uploaded by

    Odie Ongkek Mufrodi
    This document provides calculations to determine the reinforcement needed for a concrete beam. The beam dimensions are 500 mm height, 350 mm width, with a 40 mm thick cover. The bending moment is 110 kNm. Calculations are shown to determine the required area of main reinforcement (As), tension reinforcement (As'), compression reinforcement, and check calculations to verify the design meets strength requirements. Reinforcement is determined to be a double layer of bars based on the results of the step-by-step working.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Flag for inappropriate content

    You might also like

    Excel Beton 1 Pak Taufik

    Uploaded by

    Odie Ongkek Mufrodi
    26 views10 pages
    This document provides calculations to determine the reinforcement needed for a concrete beam. The beam dimensions are 500 mm height, 350 mm width, with a 40 mm thick cover. The bending moment is 110 kNm. Calculations are shown to determine the required area of main reinforcement (As), tension reinforcement (As'), compression reinforcement, and check calculations to verify the design meets strength requirements. Reinforcement is determined to be a double layer of bars based on the results of the step-by-step working.

    Original Description:

    Excel beton

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    This document provides calculations to determine the reinforcement needed for a concrete beam. The beam dimensions are 500 mm height, 350 mm width, with a 40 mm thick cover. The bending moment is 110 kNm. Calculations are shown to determine the required area of main reinforcement (As), tension reinforcement (As'), compression reinforcement, and check calculations to verify the design meets strength requirements. Reinforcement is determined to be a double layer of bars based on the results of the step-by-step working.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as xlsx, pdf, or txt
    26 views10 pages

    Excel Beton 1 Pak Taufik

    Uploaded by

    Odie Ongkek Mufrodi
    This document provides calculations to determine the reinforcement needed for a concrete beam. The beam dimensions are 500 mm height, 350 mm width, with a 40 mm thick cover. The bending moment is 110 kNm. Calculations are shown to determine the required area of main reinforcement (As), tension reinforcement (As'), compression reinforcement, and check calculations to verify the design meets strength requirements. Reinforcement is determined to be a double layer of bars based on the results of the step-by-step working.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as xlsx, pdf, or txt
    of 10

    SOAL LANGKAH PERHITUN

    Dimensi Balok (T
    h= 380 mm 0.38
    b= 230 mm 0.23
    Tebal Selimut 0.122262 Diketahui
    p= 40 mm M
    Diameter Sengkang N
    D= 13 mm S
    Diameter Tulangan Utama T
    D= 16 mm h
    Bending Momen 0.23 b
    M= 110 kNm p
    Tegangan Baja Stirrup
    fy = 400 mPa main
    d=
    Tegangan Beton d' =
    fc' = 18 mPa d' / d
    Gaya Lintang M/bd2
    S= 40 kN p min
    Es 200000 mPa p max
    p cal (try)
    M/bd2 max
    Mu 1
    As
    Mu 2
    400 15 0.0122 As'
    420 20 0.0163 Check Calculation :
    a
    18 0.01466 c
    ea
    Z
    i
    s
    s'
    201.0619298297 fy /Es
    (fy /Es) < s, OK
    (fy /Es) < s'

    Revised for As'


    ' s
    As' new

    Check Tension Allowable


    s
    s'
    c'
    Need Main Reinforce Bar Tension (+)
    Need Main Reinforce Bar Compres (-)
    NGKAH PERHITUNGAN UNTUK MENGHITUNG PEMBETONAN
    (TULANGAN RANGKAP)

    Perhitungan Satuan Rumus


    110 kNm
    0 kN
    40 kN
    0 kN
    380 mm 0.38
    230 mm 0.23
    40 mm 0.04
    13 mm 0.013
    16 mm 0.016
    319 mm 0.319 h - p - strirup - 0.5main
    61 mm 0.061 p + stirrup + 0.5main
    0.1912
    4699.844 kN/m2
    0.001 - (0.2bd2 *0.7f'c0.5) /216bd2)
    0.015 - 0.75 *((0.85fc' *1) /fy) *(600 /(600 + fy))
    0.015 - RN
    3792.566 kN/m 2 *0.8fy *(1 - 0.588 *fy /fc') *10 3

    6.054 kNm 6054.34585182


    0.001 m 2 max *b *d *10 4

    103.946 kNm M - Mu1


    1.457 m2 (M - Mu1) /(fy *(d - d')) I

    -142.990 ((As - As') *fy) /(0.85fc' *b)


    -168.224 a /1
    0 M /N
    71.814 d - 0.425c
    1 0.0001 1 /(1 - (Z /ea))
    0.00173 0.003 *(d - c) /c
    0.00409 0.003 *(c - d') /c
    0.0020
    Cek
    OK

    817.5670239364 mPa s' *Es


    0.7130591694 cm2 (fy /'s) *As'

    785372.052 mPa Mu1 /(I *As *Z)


    276.438 Mu2 /(As' *(d - d'))
    -10.874 mPa (1 - percent As' / 0.7225) * *fy *(d/c)
    1 MPA 10 kn/CM^2

    =
    1.2226 kn/cm2
    m= 26.14379
    f's = 345.5475

    1.343E-07
    SOAL LANGKAH PERHITUN
    Dimensi Balok (T
    h= 500 mm 0.5
    b= 350 mm 0.35
    Tebal Selimut 0.168255 Diketahui
    p= 40 mm M
    Diameter Sengkang N
    D= 13 mm S
    Diameter Tulangan Utama T
    D= 16 mm h
    Bending Momen 0.35 b
    M= 110 kNm p
    Tegangan Baja Stirrup
    fy = 400 mPa main
    d=
    Tegangan Beton d' =
    fc' = 18 mPa d' / d
    Gaya Lintang M/bd2
    S= 40 kN p min
    Es 200000 mPa p max
    p cal (try)
    M/bd2 max
    Mu 1
    As
    Mu 2
    400 15 0.0122 As'
    420 20 0.0163 Check Calculation :
    a
    18 0.01466 c
    ea
    Z
    i
    s
    s'
    fy /Es
    (fy /Es) < s, OK
    (fy /Es) < s'

    Revised for As'


    ' s
    As' new

    Check Tension Allowable


    s
    s'
    c'
    Need Main Reinforce Bar Tension (+)
    Need Main Reinforce Bar Compres (-)
    NGKAH PERHITUNGAN UNTUK MENGHITUNG PEMBETONAN
    (TULANGAN RANGKAP)

    Perhitungan Satuan Rumus


    110 kNm
    0 kN
    40 kN
    0 kN
    500 mm 0.5
    350 mm 0.35
    40 mm 0.04
    13 mm 0.013
    16 mm 0.016
    439 mm 0.439 h - p - strirup - 0.5main
    61 mm 0.061 p + stirrup + 0.5main
    0.1390
    1630.781 kN/m2
    0.001 - (0.2bd2 *0.7f'c0.5) /216bd2)
    0.015 - 0.75 *((0.85fc' *1) /fy) *(600 /(600 + fy))
    0.015 - RN
    3792.566 kN/m 2 *0.8fy *(1 - 0.588 *fy /fc') *10 3

    17.448 kNm 17448.3799174


    0.002 m 2 max *b *d *10 4

    92.552 kNm M - Mu1


    0.737 m2 (M - Mu1) /(fy *(d - d')) I

    -86.717 ((As - As') *fy) /(0.85fc' *b)


    -102.020 a /1
    0 M /N
    43.798 d - 0.425c
    1 0.0001 1 /(1 - (Z /ea))
    0.00208 0.003 *(d - c) /c
    0.00479 0.003 *(c - d') /c
    0.0020
    OK
    OK

    958.7524526373 mPa s' *Es


    0.3076105658 cm2 (fy /'s) *As'

    1772186.670 mPa Mu1 /(I *As *Z)


    332.081 Mu2 /(As' *(d - d'))
    -24.926 mPa (1 - percent As' / 0.7225) * *fy *(d/c)
    1 MPA 10 kn/CM^2

    =
    1.2226 kn/cm2
    m= 26.14379
    f's = 415.1017

    4.66E-08

    You might also like