Professional Documents
Culture Documents
Alfalaval Cip1800l and Cip2800l Pps00064en
Alfalaval Cip1800l and Cip2800l Pps00064en
Alfalaval Cip1800l and Cip2800l Pps00064en
A problem frequently encountered in almost all applications In addition to boosting the performance of all kinds of heat
is the build-up of deposits on heat transfer surfaces. Alfa exchangers, Alfa Laval cleaning agents extend the operating
Laval supplies a wide range of cleaning agents suitable for time between cleaning cycles as well as prolonging the
removing most of these troublesome deposits and restoring overall lifetime of the heat exchangers, without damaging
performance to optimal levels. The time-consuming work of the plates or gaskets.
opening plate heat exchangers can thus often be avoided
by using an Alfa Laval Cleaning in Place (CIP) unit. These Features and benefits
are available in a wide range of standard sizes that include Connected directly to inlet and outlet. This avoids any
reversible flow capability. Alfa Laval CIP units can be used need to open the heat exchanger, which in turn minimizes
for all types of heat exchangers, including spiral heat downtime and prolongs the working life of the gasket.
exchangers, shell-and-tube heat exchangers and gasketed,
welded and brazed plate heat exchangers. Wetted parts in the operating unit, as well as the pump
and valves, are made of AISI 304 or AISI 316 stainless
Concept steel to ensure maximum working life.
Alfa Laval CIP units are simplicity itself:
Connect the Alfa Laval CIP unit to the heat exchanger Rapid cleaning at optimal temperatures, due to built-in
Mix the cleaning agent with water in the tank and heat it up electric heaters.
Circulate the cleaning solution a couple of hours
Drain and rinse Valve arrangement for reversible flow direction. This
Disconnect the CIP unit makes it possible to remove the solid particles rapidly,
The heat exchanger is back to full performance capacity and is easy to operate without the need to rearrange the
connection hoses.
Alfa Laval CIP units are a cost-effective way to achieve better
performance, and the cleaning agents used are, of course,
environmentally friendly.
Technical specifications
Optionals
Item no
96994900-05 Welding piece for CIP connection to PHEpipe >=DN65
ALFA LAVAL is a trademark registered and owned by Alfa Laval Corporate AB.
96995310-18 Manometer 010 bar
96995310-19 Thermometer 0200C
PPS00064EN 1409 Alfa Laval reserves the right to change specifications without prior notification.