Professional Documents
Culture Documents
AWS Catalog 2004 (Ebook, 40 Pages) PDF
AWS Catalog 2004 (Ebook, 40 Pages) PDF
ch ufa nit up
an ctu ed po
ge ri St rt
Founded in 1919 to Advance the Science,
Technology and Application of Welding d S ng, ate
inc Pr s
e 2 ice
00 s
1
AWS 2004
PRODUCT
CATALOG
Professional Development
Recognized experts are secured for AWS-sponsored conferences and semi-
nars held at convenient, affordable sites around the U.S. As with all AWS
products and services, Members are entitled to a substantial discount. AWS
programs have earned an unprecedented 97 percent Excellent-Good rating
from attendees. These programs are efficient venues to keep employees at
the cutting edge and at their most productive.
Contents
Animate Your D1.1 ................................................5
General References ..........................................6-8
Qualification of Personnel ....................................9
Certification ........................................................10
Computerization..................................................10
Welding Handbook, Vol. 2, 9th Edition, Specification for Thermal Spray
Training................................................................11
Welding ProcessesPart 1 Equipment Acceptance Inspection Inspection............................................................12
See page 8 See page 12 Safety & Health..............................................13-14
Base Metal Weldability ..................................15-16
Processes & Selection..........................................17-18
Pipe & Tubing......................................................19
Standard WPSs ............................................20-21
Plastics Welding..................................................22
Structural ......................................................22-23
Machinery, Railroad, Automotive ..................24-25
Filler Material Specifications..........................26-27
Marine & Aerospace............................................28
Subject Index ................................................30-34
Order Code Index..........................................34-36
Order Information................................................37
Effects of Welding on Health Recommended Practices for Gas Standing Order Agreement ................................38
Vol XII 1997-99 Tungsten Arc Welding Order Form..........................................................39
See page 14 See page 17
Compete Through
Smarter Welding
Satisfaction Guarantee
Examine our products for 30 days at no risk. If youre not satis-
fied for any reason, please see Returns in the Ordering
Information section. Thirty-day guarantee applies to all prod-
ucts except audio, videotapes or software, which are not return-
able unless defective, and electronically delivered products.
S
A f
re
r
fer se A
A P Defen ice
N ent o P 00
d
4 EDITION
Structural Welding CodeSteel
All the information of the Code is now available on a
powerful CD-ROM! Find spe-
cific provisions fast! The
entire D1.1-2004 text, as
CTURAL
well as graphics,
tables. Five conven-
ient search methods
full text, keyword, doc-
ument/paragraph num-
ESTEEL
ber, subject, and table of
contents make referencing
almost effortless. Note: Due to
increased copyright and document security, no
printing functions are allowed on the 2004 version
exceptional search ability and viewing only.
D1.1/D1.1M:2004 CD ......$375.00
Expanded Commentary AWS Members ................$285.00
provides useful interpretation Web Order Code: D1.1/D1.1M CD
of the Codes provisions
D1.1/D1.1M COMBO ......$616.00
AWS Members ................$462.00
Web Order Code: D1.1/D1.1M COMBO
66 tables Accessories
Metric Practice Guide for
the Welding Industry
The most accepted version of the International
System of Units (SI). Included are the base units, sup-
plementary units, derived units, and most important,
the rules. Also covered are conversion factors and
rules for their use in converting customary inch-pound
units to SI units. Recommendations are presented for
style and usage in such areas as prefixes, punctuation,
number grouping, etc. Includes invaluable suggestions
on managing transition. Published in 2001, ANSI
Approved, 41 pages.
!
A1.1:2001................................$48.00
AWS Members ......................$36.00
Web Order Code: A1.1
!
SWJ-96....................................$24.00
AWS Members ......................$18.00
Web Order Code: SWJ
133 figures !
D1.1-BI ..................................$32.00
AWS Members ......................$24.00
Web Order Code: D1.1-BI
PLUS a guide for specification writers, sample welding forms, contents of prequalified welding procedure specifications and
requirements, terms and definitions extracted from A3.0 Standard Welding Terms and Definitions, UT qualification and
inspection forms, reference documents, and commentary that guides application of the code for very detailed sections.
5
General References
Filler Metal Comparison Charts
A2.4-98 Get the working knowledge you need:
There are thousands of filler metal products, each with
STANDARD SYMBOLS FOR WELDING, BRAZING, a distinctive trade namemost conforming within
AWS filler metal classifications. In the marketplace,
AND NONDESTRUCTIVE EXAMINATION right now. You need the ultimate guidethe 2000
As a language, these symbols are the precise means for designers and detailers to place welding, brazing, edition of Filler Metal Comparison Charts.
and nondestructive examination information on drawings, and the most error-free means for welding personnel
to adhere to original plans. This publication is essential for interpreting mandatory codes such as the AWS This first edition since 1993 has:
D1.1/D1.1M:2004 Structural Welding CodeSteel. Secure your copy of the only official statement of a welding 83 national and international suppliers along with
symbol system approved by ANSI and in use by the U.S. Departments of Transportation and Defense. 101 pages, their mailing address, telephone, fax, and Web site
addressover half were not in the 1993 FMC
!
published in 1998. Ask about Spanish edition (A2.4-SP).
A2.4-98......................$124.00 AWS Members............$93.00 Web Order Code: A2.4 handy indexes arranged by classification numbers
(1,500) and brand names (11,000) for finding
Improved! information quickly
AWS classifications used as chapters
A2.1-WC & DC 438 pages, 8-1/2" x 11", softbound
Welding Symbols Charts
!
FMC:2000 ............................$160.00
Easy-to-read laminated charts, offered as a AWS Members ....................$120.00
set of two charts, vividly illustrate proper Web Order Code: AWS FMC
usage of basic and supplementary welding
symbols. Use on your desk, drafting table or in Welding Inspection
the shop or classroom. Wall Chart is 22" x 28" Handbook, 3rd Edition
and Desk Chart is 11" x 17". The new edition supports the work of thousands of
A2.1:1998-WC & DC ......$40.00
AWS Members ................$30.00
Web Order Code: A2.1
inspectors and supervisors with their increasingly
stringent quality assurance responsibilities. Not too
deep and not too abridged, this edition of Welding
Inspection earns the rank of handbook with its
no-nonsense style, clarity of detail, and logical
progression of informationwith chapters on:
Welding Metallurgy, operations inspection safety QA ferrous weld-
4th Ed., Vol. 1: Fundamentals ing metallurgy preheating/postweld heat treating
The premier publication on welding metallurgy of discontinuities qualification of WPSs qualifica-
steels. Comprehensive and encyclopedic in scope, tion of welders destructive testing proof tests
Welding Metallurgy was written by the late NDE methods metrics standards symbols
George E. Linnert, one of Americas most respect-
ed and informed metallurgical authorities. It is a reference that can be used as a training
Builders, manufacturers, welding shops, colleges, text for inspectors, engineers, and welders alike to
and universities will benefit from this indispensa- reinforce their abilities to evaluate the difference
ble reference book. Place a lifetime of welding between discontinuities and rejectable defects. 18
research and experience at your fingertips with chapters, 16 tables, 108 figures, 244 pages, indexed.
The Professionals Advisor on this practical insight into the science and technol- 6-1/2" x 9", softbound. 3rd edition, published in 2000.
!
Arc Welding Power Sources and ogy of metals. Packed with 248 figures, 62 tables, WI:2000................................$72.00
Related Equipment and 10 appendices. 7" x 10", 950 pages softbound, AWS Members. ....................$54.00
This Advisors 76 pages are packed with illustra- published in 1994. Web Order Code: AWS WI
tions, tables, definitions, explanation, tips, and
advice. Chapters in the 5-1/2" x 8-1/2" tabbed and AWS Members ....................$108.00
!
WM1.4 ..................................$144.00
The Design and Planning Manual for
spiral-bound resource include voltage, amperage, Web Order Code: WM1.4 Cost-Effective Welding
metering, transformers, controls, selection crite- Originally developed under the auspices of the Maritime
ria, efficiency, and cost. Covers the SMAW, GTAW, Jeffersons Welding Encyclopedia, Administration with support from the U.S. Navy, The
GMAW, FCAW, and CAC-A processes. Related 18th Edition Design and Planning Manual for Cost-Effective
equipment includes wire feeders, guns, and sys- No matter what your involvement in the industry, Jeffersons Welding has been edited, updated and expanded by
tem controls. Meant to be portable like its sister Welding Encyclopedia puts the world of welding right at past AWS Board of Directors member, Eugene
Advisors, this book has 78 figures and 14 tables your fingertips. A useful tool for any level in the industry, Hornberger. The Manual is meant to serve as a practical
that should help resolve on-the-shop-floor problems. from student to the experienced veteran. And Jeffersons guide for engineers, planners, and hands-on profession-
(When youve got problemsand who Welding Encyclopedia isnt just for engineers. Its a handy als to improve scheduling and lessen rework regardless
doesnt?go directly to Chapter 10, Common reference for anyone who needs quick access to thorough of industry. The 142-page publication is divided into
Problems, Misunderstandings, and Trouble-shoot- welding information. Jeffersons Welding Encyclopedia isnt eighteen sections, including welding cost analysis,
ing.) When youre in the market to buy, become just terms and definitions. Topics are explained, illustrated, modular construction, concepts of welding design,
an educated consumer through Selection Criteria, and made comprehensible. It also includes a historical look fatigue considerations, joint design, weld distortion and
Efficiency, and Cost Considerations. 76 pages, at the welding industry, a handy Buyers Guide, and an control, information for the welder, NDE, and defects
11 chapters, published in 1999. exhaustive listing of key industry suppliers. Color illustra- and discontinuities. Each section has its own table
of contents, numerous drawings, tables, charts and check
!
PAPS ....................................$68.00
AWS Members ....................$51.00
tions, revised and edited by Robert L. OBrien. Published in
1997. CD-ROM or Hardcopy.
JWE ..........................................$172.00
lists, and concludes with a bibliography and
recommended reading list. 8-1/2" x 11", softbound,
Web Order Code: PAPS
JWE-CD ....................................$172.00 published in 1999.
AWS Members ..........................$129.00
Web Order Code: AWS JWE !
DPW ........................................$68.00
AWS Members ........................$51.00
Web Order Code: DPW
6
Compete through smarter welding
General References
!
essential companion to B4.0, Standard Methods for ARE-5 ........................................$60.00 reduction and control. 60 figures, 4 tables, 26 equa-
Mechanical Testing of Welds, which tells you how to AWS Members ..........................$45.00 tions. 61 pages, softbound, published in 2001.
conduct the tests. 48 figures, 3 tables, 8 equations. 56 Web Order Code: ARE-5 ARE-7 ........................................$60.00
pages, softbound, published in 2001.
ARE-6 ........................................$60.00
!
AWS Members ..........................$45.00
!
Web Order Code: ARE-7
AWS Members ..........................$45.00 Symbols for Joining
Web Order Code: ARE-6 and Inspection
The basic welding symbol is comprised of the reference Economics of Welding
line, about which the weld symbol and dimensions are and Cutting
Welding Metallurgy located, and an arrow, designing the location for the This Welding Handbook chapter is an un-biased
While metallurgy is a standard subject in general engi- weld. This document examines each component of the primer based on considerable research that will give
neering, it doesnt provide the information needed in welding symbol: reference line (required); arrow the estimator a good idea of the arc-on versus the non-
welding engineering. This helpful chapter from the (required); tail; basic weld symbol; dimensions and other arc time for any given welding process. Topics include
Welding Handbook starts with coverage of physical data; finish symbols; specification, process or other refer- the cost estimate, automated and robotic systems,
metallurgy, which serves as a solid refresher for many, ences; and supplementary symbols. It applies the welding control of welding costs, and the economics of weld-
and a clear introduction for others. Reviews alloys, symbols to the most common types of welds: fillet, plug, ing, brazing, soldering, and thermal cutting. 33 fig-
phase transformations, phase diagram, effects of slot, spot, projection, seam, stud, and edge welds. Also ures, 23 tables, 30 equations. 50 pages, softbound,
deformation and heat treatment, cold working, and covers brazed joints, soldering symbols and joints, and published in 2001.
austenitization caused by welding. Other main topics elements of inspection symbols. Examples are in U.S. ARE-12 ......................................$48.00
are weldability of commercial alloys and corrosion in
welds and brazed or soldered joints. Impressive bibli-
Customary units. 40 pages, 45 figures, 4 tables. 8-1/2" x
11", softbound, published in 2001. Web Order Code: ARE-12
!
AWS Members ..........................$36.00
7
To order or for more information: 800 -854 -7179 or global.ihs.com
General References
NEW: Welding ProcessesPart
1, Welding Handbook, 9th Ed.,
Vol. 2 AWS WELDING HANDBOOKS
The latest volume of the Welding Handbook has 15 chap- Welding Science and Technology,
ters chock-full of technology on welding and related
processes. This new volume contains revised, updated,
Welding Handbook, 9th Ed., Vol. 1
and new information on power sources, arc welding
This volume of the renowned Welding Handbook series reflects the latest developments in the field
processes, electroslag welding, stud welding, oxyfuel gas of weldingfrom regenerated processes that have benefitted from the explosions in electronic
welding, brazing, soldering, oxygen cutting, and arc cut- technology to the most current information on robotics and best practices of manual arc welding.
ting and gouging. Reviewed and revised by more than 75 Seventeen chapters create a true panorama of the technology that has built the 20th century. A
welding experts, this volume is a must-have reference must-have reference for engineers, metallurgists, structural designers, inspectors, and anyone who
source for engineers, structural designers, technologists, needs to understand this continuously evolving industry. 17 chapters, 2 annexes, 530 illustrations,
inspectors, welders, welding educators, or anyone who and 168 tables. 918 pages, 8-1/2" x 11", hardcover, published in 2001.
!
needs to know about welding. More than 570 pages, 260 WHB-1.9............................$188.00
line drawings, 100 photographs, 148 tables, 8-1/2" x 11", AWS Members..................$141.00
hardbound. Published in 2004. Web Order Code: WHB-1.9
!
WHB 2.9$188.00
!
AWS Members ...$141.00 WHB-1.8..............................$88.00
Web Order Code: WHB 2.9 AWS Members....................$66.00
Web Order Code: Web Order Code: WHB-1.8
Manual de Soldadura, 8th Get all four volumes of the current
Edition, Vol. 2, in Spanish
Spanish translation of Welding Handbook, 8th Edition, Welding Handbook Set at substantial savings.
Vol. 2, Welding Processes, 1996. 8-1/2" x 10-1/2", best Only $462 for AWS Members; $616 for others.
copy available, softbound.
WHB-2.8-SP..........................$108.00 Use order code WHB-ALL.
Web Order Code: WHB-2.8-SP
!
AWS Members........................$81.00 Vols. 1 and 2, 9th Ed., plus Vols. 3 and 4, 8th Ed.
Materials and Applications Design Handbook for WELDPERFECT: The Easy Guide to
Part 1, Welding Handbook, Calculating Fillet Weld Sizes Perfect Welding
8th Ed., Vol. 3 A more precise selection of the correct fillet weld size By simplifying some of the technical language used by
This volume covers information on nonferrous metals, is essential for satisfactory performance of the weld- the profession, this book delivers practical knowledge
plastics, composites, ceramics, and new specialized topics: ment. Calculate the correct fillet weld size through an of welding to students, less experienced welders, even
maintenance and repair welding and underwater welding alternative approach to the more traditional design hobbyists. Color illustrations and charts are used to
and cutting. This 526-page, hardcover book has 10 philosophy. A must for quality-minded welding fabri- explain the common welding processes, filler metals,
chapters, including safe practices and applications, cators in a variety of industries utilizing steel, stain- metallurgy, and safety considerations. Appendices
weldability, and applications of specific metals. Colorful fig- less steel and aluminum alloys. Users should refer to include welding symbols and definitions. By Darrel
ures, easy-to-read tables, and an index of major subjects McGuire. Second printing, 1998, 84 pages.
the applicable standards for their application, as this
WPERF ................................$24.00
make this book one of the most practical tools to locate
quickly the information you need. 8-1/2" x 10-1/2", published
document is not a consensus standard. Published in
1997, 8" x 10", softbound, 24 pages.
AWS Members ....................$18.00
Web Order Code: WPERF
!
in 1996.
!
FWSH ....................................$44.00
!
WHB-3.8..................................$156.00 AWS Members ......................$33.00
AWS Members ......................$117.00 Web Order Code: FWSH CAN YOU APPLY
Web Order Code: WHB-3.8 THESE A3.0 TERMS?
Materials and Applications Actual throat; boxing; double
The Practical Welding Engineer
Part 2, Welding Handbook, arcing; welding performance
8th Ed., Vol. 4 This valuable book offers a
Volume Four contains considerable expansion of informa- practical approach to the qualification; initial current;
tion provided in previous editions. This expanded coverage application of welding theo- liquation; oxygen lance;
has resulted in the presentation of material never before ries. Two expert authors
published by AWS. Like its predecessors, this volume of the with nearly 60 years of hard- reactor; slugging; weave bead.
Welding Handbook is the ultimate reference tool. gained experience in heavy
Not only does the book come equipped with two separate engineering offer solid Standard Welding
indexes, but each chapter boasts its own Table of Contents. advice in real-world applica- Terms and Definitions
Packed with more than 500 tables, charts, and photos, it tion of welding metallurgy, Add precision and clarity to your technical writing with the
will make your research efforts easier than ever. Chapters: materials behavior, fracture correct usage of welding terms. Adequate definition
Carbon and Low-Alloy Steels; High-Alloy Steels; Coated mechanics, and much more. requires there be only one clearly applicable definition.
Steels; Tool and Die Steels; Stainless and Heat-Resisting Key topics include contracts and specifications, selec- The definition must accurately reflect the terms use in the
Steels; Clad and Dissimilar Metals; Surfacing; Cast Irons; tion of welding processes, welding procedure qualifica- welding world. Industry correct and nonstandard terms
Titanium and Titanium Alloys; Reactive, Refractory, and tion, production welding control, estimating and reduc- are both included in this 153-page compilation of over
Precious Metals and Alloys. Published in 1998, 621 pages, ing welding costs, common weld defects, and practical 1,200 definitions. Also includes the Master Chart of
8-1/2" x 10-1/2", hardbound. problem solving. By J. Crawford Lochhead and Ken Welding and Allied Processes and the Joining Method
Rodgers, softbound, 160 pages, published in 2000.
!
WHB-4.8 ....................................$156.00 Chart. ANSI Approved, Illustrated with 53 drawings,
!
AWS Members ..........................$117.00 PWE........................................$68.00 published in 2001.
AWS Members ......................$51.00
!
Web Order Code: WHB-4.8 A3.0:2001 ................................$120.00
Web Order Code: PWE
AWS Members. ........................$90.00
Web Order Code: A3.0
8 To protect your investment, membership will be verified.
Qualification of Personnel
Guide for the Training and
Specification for Welding Procedure and Qualification of Welding
Performance Qualification Personnel: Entry Level Welder
This universal qualification document is an excellent tool to ensure economical quality. Covers all A competency-based curriculum detailing the mini-
welding processes and an exhaustive array of materials used in metal fabrication. Indispensable for mum acceptable skill requirements for the training
those who design and manufacture non-code products but who may also be performing to ISO 9000. and qualification of entry level welders. Published in
Experience shows Specification for Welding Procedure and Performance Qualification adapts to 1995, 125 pages.
the requirements of ISO 9000. EG2.0-95 ......................................................$64.00
Spells out requirements for the qualification of welding procedures and the requirements for the performance AWS Members ............................................$48.00
!
qualification of welders and welding operators. Also meets requirements of D1.1, D14.2 through D14.6, and Web Order Code: EG2.0
D15.1. ELW Set (EG2.0-95 and QC10-95) ........$72.00
WELDING PROCESSES INCLUDE: B2.1 GIVES COMPLETE COVERAGE OF: AWS Members ............................................$54.00
Oxyfuel Gas Welding Shielded Metal Arc Base Metals Filler Metals Web Order Code: ELW Set
Gas Tungsten Arc Welding Welding Qualification Variables Testing Requirements
Submerged Arc Welding Laser Beam Welding ANSI Approved. Published in 2000, 248 pages, Guide for the Training and
Gas Metal Arc Welding Flux Cored Arc Welding 24 tables, 34 figures. Qualification of Welding
!
Plasma Arc Welding Electroslag Welding B2.1:2000 ................................$120.00 Personnel: Level III, Expert Welder
Electrogas Welding Electron Beam Welding AWS Members ..........................$90.00 A competency-based curriculum detailing the minimum
Web Order Code: B2.1 acceptable skill requirements for the training and qualifi-
cation of expert welders. Published in 1996, 149 pages.
PERSONNEL Specification for the Qualification of EG4.0-96 ......................................................$32.00
Welding Sales Representatives AWS Members ............................................$24.00
Employers should use these standards to facilitate promo-
tions, new hires or self-evaluations. Explains what the 12 pages, published in 2002. Web Order Code: EG4.0
!
B5.14:2002 ................................$24.00 ELW Set C (EG4.0-96 and QC12-96) ....$72.00
!
function is and does, and describes minimum education
and experience. Establishes the qualification require- AWS Members..........................$18.00 AWS Members ............................................$54.00
ments from which a central certification agency or an Web Order Code: B5.14 Web Order Code: ELW Set C
employer may develop a certification program. Specification for the Qualification of ECONO Package of 6 documents
Specification for the Qualification of Welding Inspector Specialists and EG2.0-95, EG3.0-96, EG4.0-96, QC10-95,
Welding Educators Welding Inspector Assistants QC11-96, QC12-96
19 pages, with one mandatory and one non-mandatory 12 pages, published in 2001. ANSI Approved. ELW Set D ........................$198.00
!
annex. ANSI Approved, published in 2000. B5.2:2001..................................$24.00 AWS Members ....................$148.00
B5.5:2000..................................$24.00 AWS Members..........................$18.00
!
Web Order Code: ELW Set D
AWS Members..........................$18.00 Web Order Code: AWS B5.2
Web Order Code: AWS B5.5 Specification for the Qualification of Specification for Qualification and
Specification for the Qualification of Welding Engineers Certification of Entry Level Welders
11 pages, published in 2001. ANSI Approved. Requirements and program for AWS to certify entry level
Welding Supervisors
!
8 pages, published in 2000. ANSI Approved. B5.16:2001................................$24.00 welders. This certification requires performance qualification
B5.9:2000..................................$24.00 AWS Members..........................$18.00 and practical knowledge tests. Published in 1995, 20 pages.
!
AWS Members..........................$18.00
Web Order Code: AWS B5.9
Web Order Code: B5.16
Standard for Brazing Procedure
AWS Members ......................$17.00 !
QC10-95 ................................ $22.00
!
B2.2-91 ....................................$44.00 Requirements and program for AWS to certify advanced level
Web Order Code: B5.17
AWS Members ........................$33.00 welders. This certification requires performance qualification
Guide for Thermal Spray Operator Web Order Code: B2.2 and practical knowledge tests. Published in 1996, 31 pages.
Qualification
75 pages, published in 2002. ANSI Approved.
Specification for the Qualification
of Radiographic Interpreters AWS Members ......................$17.00 !
QC11-96..................................$22.00
!
C2.16/C2.16M:2002..................$32.00 16 pages, published in 2003. ANSI Approved. Web Order Code: QC11
AWS Members..........................$24.00
!
B5.15:2003 ............................ $24.00
Web Order Code: C2.16 AWS Members ......................$18.00
Specification for Qualification and
Web Order Code: B5.15 Certification for Level III Expert
Specification for Qualification of Welder
Robotic Arc Welding Personnel Guide for the Training and Requirements and program for AWS to certify expert level
14 pages, published in 1999. ANSI Approved. welders. This certification requires performance qualification
D16.4:1999................................$24.00 Qualification of Welding Personnel:
!
and practical knowledge tests. Published in 1996, 25 pages.
AWS Members..........................$18.00 Level II Advanced Welder
!
QC12-96 ................................ $44.00
Web Order Code: D16.4 A competency-based curriculum detailing the mini- AWS Members ......................$33.00
mum acceptable skill requirements for the training Web Order Code: QC12
Specification for the Qualification of and qualification of advanced welders. Published in
Welding Inspectors 1996, 160 pages.
20 pages, published in 2003. ANSI Approved. EG3.0-96 ......................................................$32.00
!
B5.1:2003 ..................................$24.00 AWS Members ............................................$24.00
AWS Members..........................$18.00
Web Order Code: AWS B5.1
Web Order Code: EG3.0
ELW Set B (EG3.0-96 and QC11-96) ....$72.00
!
AWS Members ............................................$54.00
Web Order Code: ELW Set B
9
!Available in electronic format. NASA Preferred NASA Pending Department of Defense Adopted
Certification
!
Welding. Published in 1993. welding educators. Describes Certified Welding Inspector (SCWI), QC17:2002 FREE
Order at www.aws.org
!
QC7-93................................FREE the principles of conduct and Certified Welding Inspector (CWI),
Order at www.aws.org practice by which certification is and Certified Associate Welding
obtained. AWS conducts written Inspector (CAWI). The CWI exami- Standard for the AWS
Standard for examinations to verify skill and nation tests the inspectors knowl- Certification of Robotic
Accreditation of Test knowledge of welding fabrica- edge of welding processes, welding Arc Welding Personnel
Facilities for AWS tion and requires documentation procedures, welder qualification, Describes the requirements for AWS certifi-
Certified Welder Program of teaching skill. The standard is destructive testing, nondestructive cation of automated process operators and
This standard describes the program intended to supplement the testing, terms, definitions, symbols, technicians. It details how personnel are
directed by the American Welding requirements of an employer or reports, records, safety, and certified, and the principles of conduct and
Society for a third-party accredita- state regulations. Published in responsibilities. A supplemental practice by which certification may be
tion of test facilities used to perform 1991, 9 pages. examination is required for upgrade maintained.
QC19:2002 FREE
! !
welding qualification, welding, and QC5-91........................ FREE to SCWI. ANSI Approved. Published
testing. Published in 1989, 11 pages. Order at www.aws.org in 1996, 14 pages. Order at www.aws.org
! !
QC4-89 .............................. FREE QC1-96................................FREE
Order at www.aws.org Order at www.aws.org
Computerization
WeldCost Express Structural Welding CodeSteel Standard Guide for Describing Arc
At-your-computer weld cost estimating All the information of the Code is now available on a pow- Welds in Computerized Material
application for use with Microsofts Excel erful CD-ROM! Find specific provisions Property and Nondestructive
spreadsheet program fast! The entire D1.1-2004 text, as Examination Databases
well as graphics, tables. Five Developed in cooperation with ASNTs Committee E49 on
Developed and sharpened over 10 years by a nuclear convenient search methods Computerization of Material Property Data. Guide is divided
welding engineer to identify controllable welding full text, keyword, docu- into two parts: weld identification and weld properties, and
variables and to calculate their effects on costs. This ment/paragraph number, sub- NDE data. Data fields necessary to uniquely define an arc
allows the Weld Cost Express user to determine when ject, and table of contents weldthe same data needed to produce a Procedure
and where changes should be made for cost savings. make referencing almost effort- Qualification Recordare provided. An excellent template
Made by Sterling Weld Data Systems, with customer less. Note: Due to increased whether youre computerized or still using conventional
support by e-mail. copyright and document security, no methods. 9 pages, published in 1992. ANSI Approved.
printing functions are allowed on the 2004 version
A9.1-92....................................$16.00
On-line demo reached through www.aws.org/cgi-bin/shop/.
Use AWS Web site shopping cart to buy this CD-ROM and
exceptional search ability and viewing only.
D1.1/D1.1M:2004 CD ......$375.00 !
AWS Members ......................$12.00
Web Order Code: A9.1
instructions, Estimating and Comparing Welding Costs. AWS Members ................$285.00
Only $99.00 (plus $4.95 shipping and handling within the Web Order Code: D1.1/D1.1M CD
Standard Guide for Recording Arc
U.S.) Order at www.aws.org D1.1/D1.1M COMBO ......$616.00 Weld Material Property and
AWS Members ................$462.00 Nondestructive Examination Data
Web Order Code: D1.1/D1.1M COMBO in Computerized Databases
Companion to A9.1-92 providing the balance of information
necessary to completely document your welding by format-
ting the fields and types of mechanical property and NDE
data that should be entered into a weld property database.
WeldAcademy Search, retrieve, and duplicate successful combinations.
WeldAcademy is a new way to learn about welding WeldAcademy is Internet-based, using a tracking- Excellent document for computerized and noncomputerized
technology and the welding industry through e-learn- management system that allows instructors to rate operations. 7 pages, published in 1992. ANSI Approved.
ing. This is a Web-based, 10-module course covering a the progress of module users. WeldAcademy covers
!
A9.2-92 ...................................... $16.00
broad range of instruction including safety, welding over 40 hours of instruction. Over 30 pre- and post- AWS Members .......................... $12.00
processes, welding inspection, and metallurgy. The assessment questions for each module reinforce key Web Order Code: A9.2
program features digital videos, animations, and learning objectives. Available in English and Spanish.
graphics to bring essential welding concepts to life. Go to www.weldacademy.com/ for demo, skill test,
It is engaging, easy to use, and instructionally sound. and licensing information.
10
Compete through smarter welding
Training
Hands-On, Self-Training
Certification Manual Package includes Visual Inspection Workshop Reference
Manual, Welding Inspectors Professional Quality Tool
for Welding Inspectors Kit, Guide for Visual Examination of Welds, and Guide
for Nondestructive Examination of Welds.
Self-study to prepare for HST ......................................$384.00
AWS Members ....................$288.00
Web Order Code: AWS HST INCH or AWS HST METRIC
AWS welding inspector exams
Guide for Setting Up a
An excellent reference and introduction for those interested in becoming Certified Welder Training Facility
Welding Inspectors. Specifically guides those studying for the CWI examination. New, This manual defines the physical requirements of a welding
sleeker style with improved readability. This is the 4th edition of a best seller used by instruction facility. It is intended to give step-by-step guid-
ance to institutions that desire to build or convert facilities
thousands of CWI candidates since it was first published in 1977. Veteran editor to train welders. 14 pages, published in 1998.
Eugene Hornberger is not only a CWI himself, but has taught the AWS exam prepara-
!
GWF-98 ..................................$32.00
tory seminar for years. Hes packed this latest edition with 152 figures, 23 drawings, AWS Members ......................$24.00
Web Order Code: GWF
and 8 tables, plus annexes. Eleven chapters cover: the welding inspector, responsibili-
ties, standards, joint geometry and terminology, symbols, weldability, destructive D1.1 Code Clinic
testing, procedure and welder qualification, welding/brazing/cutting processes, Reference Manual
discontinuities, NDE, and inspector reports. Each chapter concludes with a Official textbook used for CWI preparatory seminar;
along with the Certifiction Manual for Welding
self-administered test similar in content and style to the actual CWI exam questions. Inspectors, the D1.1 Code Clinic Reference Manual will
Features a contemporary layout that includes tip boxes. If youre new to welding help CWI candidates prepare for the open-book portion
inspection, the Certification Manual provides A-Z coverage. If you plan to take the of the CWI examination that tests ability to navigate
AWS CWI exam and study on your own, this book has been invaluable through a code and find correct answers within a fixed
amount of time. Includes 9 chapters, 75 pages, 28 illus-
to literally thousands of CWI applicants. Softbound, published in 2000. trations. Test questions similar to exam questions, and
CM:2000 ..............................$168.00 the answers, included. Published in 2003.
AWS Members ....................$126.00 ! CC-RM....................................$68.00
!
AWS Members ......................$51.00
Web Order Code: AWS CM Web Order Code: CC-RM
TECHNOLOGY !
AWS Members ......................$51.00
Web Order Code: AWS API-M
WIT Workbook
90 pages, softbound companion, published in 1999.
WIT-W-99..............................$64.00
AWS Members ......................$48.00 !
Web Order Code: WIT-W
11
To order or for more information: 800 -854 -7179 or global.ihs.com
Inspection
Welding Quality Assurance Guide for the Visual Welding Inspection
Guideline for Fabricators Examination of Welds Handbook, 3rd Edition
An excellent outline to assist small to medium Gives guidance to assist in the visu- The new edition supports the work of thousands of
fabricators in developing new welding quality- al examination of welds. Included inspectors and supervisors with their increasingly
assurance systems or to enhance an existing system. are sections on prerequisites, fun- stringent quality-assurance responsibilities. Not too
Published in 1997, 8-1/2" x 11", softbound. damentals, surface conditions, and deep and not too abridged, this edition of Welding
!
WQAG ....................................$12.00 equipment. Sketches and 48 full- Inspection earns the rank of handbook with its
AWS Members ........................$9.00 color photographs illustrate weld discontinuities com- no-nonsense style, clarity of detail, and logical
Web Order Code: WQAG monly found in welds. 42 pages, 48 figures, 3 annexes. progression of informationwith chapters on:
8-1/2" x 11", softbound. Published in 2000. operations inspection safety QA ferrous welding
Practical Reference Guide for B1.11:2000..............................$96.00 metallurgy preheating/postweld heat treating
!
Corrosion of Welds: Causes and Cures AWS Members ......................$72.00 discontinuities qualification of WPSs qualification
Drawing from 28 years of materials troubleshooting, Web Order Code: AWS B1.11 of welders destructive testing proof tests NDE
author Ted V. Weber has developed a succinct methods metrics standards symbols
introduction to various corrosion mechanisms, including
pitting, stress corrosion cracking, erosion, and galvanic It is a reference that can be used as a training
Guide for the text for inspectors, engineers, and welders alike to
and selective leaching. 44 full-color photographs clearly
illustrate the costly destruction caused by corrosion Nondestructive reinforce their abilities to evaluate the difference
in welds. The author offers clear advice on avoiding Examination of Welds between discontinuities and rejectable defects. 18
corrosion, including alloying for resistance. 8-1/2" x 11", Gives guidance on nondestructive chapters, 16 tables, 108 figures, 244 pages, indexed.
24 pages, published in 1999. examination methods commonly 6-1/2" x 9", softbound. 3rd edition, published in 2000.
used to examine weldments.
! !
PRGC........................................$44.00 WI:2000 ..................................$72.00
AWS Members........................$33.00 Addresses which method from AWS Members. ......................$54.00
Web Order Code: PRGC among visual, penetrant, magnetic, radiographic, Web Order Code: AWS WI
ultrasonic, electromagnetic (eddy current), and leak
Practical Reference Guide to testing best detects various types of discontinuities. 48
Radiographic Interpretation pages, 29 figures, 4 tables, 4 annexes. 8-1/2" x 11",
Standard Methods for
Acceptance Criteria softbound. Published in 1999.
Mechanical Testing of Welds
!
Easy orientation to the levels of discontinuities that B1.10:1999..............................$96.00
may be present in a weld which will not affect the AWS Members ......................$72.00 Same help in two versions: U.S. Customary
form, fit, or function of the weldment. Provides Web Order Code: AWS B1.10 or Metric Units
three levels of conditions that can be specified for
Describes the most commonly used mechanical test
determining radiographic acceptance of welds.
methods that are applicable to welds and welded
Includes charts and diagrams. 32 pages, softbound. joints.
Published in 1995 by AWS.
Guide to Weld Discoloration Levels
!
PRG ........................................$44.00 Each test method gives details concerning specimen
AWS Members ......................$33.00 on Inside of Austenitic Stainless
Steel Tube preparation, test parameters, testing procedures,
Web Order Code: PRG and report requirements. NOTE: Acceptance criteria
Laminated sheet with color illustration showing the
are not included but may be found elsewhere, for
Welding Inspectors Tool Kit degrees of coloration on the inside of an austenitic
example in application standards.
The tools to use in your inspection career in a heavy- stainless steel tube with increasing amounts of
duty vinyl case. Professional Quality kit contains: Weld oxygen in the backing shielding gas. Suitable as a For each test method, information is provided con-
Gauge, Micrometer, Magnifier, Rule, Metal Dial Caliper, specifying tool and a visual inspection guide. ANSI cerning applicable American National Standards
Fillet Weld Gauge, and VWAC (undercut) Gauge. These Approved. Published in 1999. Institute (ANSI), American Society for Testing and
are the same kinds of tools used in the AWS hands-on D18.2:1999............................$32.00 Materials (ASTM), and American Petroleum
Certified Welding Inspector Exam. From Gal Gage. AWS Members......................$24.00 Institute (API) documents.
Inch Version ........................$184.00 Web Order Code: D18.2
Metric Version ....................$245.00 An expanded section on weldability testing covers
Web Order Code: WELDING INSPECTOR AWS Ultrasonic Rulers cruciform, implant, Lehigh restraint, varestraint,
Three rulers for measuring the position of weld flaws and oblique Y-groove tests, again using succinct
Standard Method for in a convenient carrying case. Each ruler (70, 60, 45) instructions and detailed figures and schematics.
Evaluating the Strength of Note: Joint tests for brazements are covered in
has three scales: B is a common inch ruler and repre- AWS C3.2.
Brazed Joints In Shear sents the actual dimension of the sound path; for each
Describes the test method used to obtain reliable data inch of sound path, there is an A scale inch of surface Standard Methods for Mechanical Testing of Welds
on the strength of brazed joints loaded in tensile, measurement, and a C scale inch of depth. Made in U.S. Customary only. 97 pages, 64 figures.
shear, and four-point bending. ANSI Approved, 7 pages, U.S. of durable laminated plastic. Comes with guide. ANSI Approved. Published in 1998.
published in 2001.
! !
URS ........................................$24.00 B4.0-98 ................................$80.00
!
C3.2M/C3.2:2001 ................ $60.00
AWS Members .................... $45.00
AWS Members ......................$18.00
Web Order Code: AWS URS
AWS Members ....................$60.00
Web Order Code: B4.0
Web Order Code: C3.2M/C3.2
Recommended Practices Metric only. 104 pages, 64 figures. ANSI Approved.
NEW: Specification for Thermal Spray Published in 2000.
for Ultrasonic Inspection of
!
Equipment Acceptance Inspection B4.0M:2000 ........................$80.00
This specification documents the thermal spray equip- Brazed Joints AWS Members ....................$60.00
ment acceptance requirements for plasma, arc-wire, Requirements for ultrasonic test instruments and Web Order Code: B4.0M
flame-powder, flame-wire, flame-rod, and flame-cord accessory equipment such as tanks, turntables, bridges,
high-velocity oxygen fuel (HVOF) equipment. carriages, manipulators, transducers, alarms, and
Inspection report forms are also provided. couplets. ANSI Approved. Reaffirmed in 1998, 12 pages.
Published in 2003, 25 pages.
!
C3.8-90R................................ $44.00
!
C2.21M/C2.21:2003 ..............$48.00 AWS Members .................... $33.00
AWS Members ......................$36.00 Web Order Code: C3.8
Web Order Code: C2.21M/C2.21
12
To protect your investment, membership will be verified.
Safety & Health
Safety in Recommended Safe Practices for Ventilation Guide for Weld Fume
Welding, Cutting, Preparation for Welding and Introduces the reader to various types of ventilation
and Allied Cutting of Containers and Piping systems, including general supply and exhaust,
Processes This standard informs the reader of the necessary safe for control of welding fumes. Find health hazard
Unions, societies, trade practices to be followed in the cleaning and preparation information on air contaminants from fumes,
groups, U.S. military for welding and cutting of containers and piping. It principles of systems design and selection, and
and U.S. enforcement agen- describes various methods for cleaning, including water, drawings that illustrate ventilation techniques.
cies all contributed to the lat- steam, hot chemical and mechanical, and techniques to Published in 2001, 10 pages.
est edition of Safety in
Welding, Cutting, and Allied Processes including
AWS, Sheet Metal Workers, OSHA, and NIOSH. 52 pages
be used for their proper preparation, such as inserting.
12 pages, published in 1999.
F3.2M/F3.2:2001....................$44.00
AWS Members ......................$33.00 !
Web Order Code: F3.2M/F3.2
!
F4.1:1999................................$44.00
cover oxyfuel gas welding and cutting safety, arc welding
AWS Members ......................$33.00
and cutting equipment safety, resistance welding safety, Specification for Use and
Web Order Code: F4.1
electron beam processes, and laser beam cutting and
Performance of Transparent
welding safety. Four appendices. Published
in 1999; ANSI Approved. Methods for Sampling Airborne Welding Curtains and Screens
Informs the reader of reasonable and adequate means,
!
Z49.1:1999 ......................................$88.00 Particulates Generated by Welding
AWS Members ................................$66.00 ways, and methods for the testing, selection, and safe
and Allied Processes use of transparent welding curtains and screens.
Web Order Code: Z49.1 Use the proper technique for sampling welding fumes
These curtains and screens are designed to provide
in the workplace. Emphasis is placed on positioning
Characterization of the sampling device and calibration of the equipment. outside viewers, at some distance from the welding arc
Arc Welding Fumes ANSI Approved. Published in 1999, 12 pages. or operation, a safe view of the operation and operator.
Published in 2001, 10 pages.
!
Analysis based on a variety of rods and wires. F1.1:1999 .............................. $44.00
!
Published in 1983, 56 pages. AWS Members .................... $33.00 F2.3M:2001 ............................$44.00
AWS Members ......................$33.00
!
CAWF......................................$22.00 Web Order Code: F1.1
AWS Members .................... $17.00 Web Order Code: F2.3M
Web Order Code: CAWF Laboratory Method for Measuring
Fume Generation Rates Preparing Containers
Lab Validation of Ozone Sampling and Total Fume Emission for for Welding or Cutting
with Spill Proof Impingers Welding and Allied Processes Informs the reader that all containers are hazardous
Published in 1983, 50 pages. Laboratory method outlined for the determination unless they are verified to be safe. Explosions, fires,
of fume generation rates and total fume emission. and health hazards may result if welding or cutting is
!
LVOS ......................................$28.00
A test chamber is used to collect representative performed on containers that are not free from
AWS Members .................... $21.00
fume samples under carefully controlled conditions. hazardous substances, such as combustible, reactive,
Web Order Code: LVOS
ANSI Approved. Published in 1999, 13 pages. or toxic vapors, dusts, and gases. Published in 2001,
!
F1.2:1999 .............................. $44.00 8 pages.
Oxyfuel Gas Welding,
AWS Members .................... $33.00 PCWC:2001 ............................$20.00 (25 copies)
Cutting, and Heating Safely Web Order Code: F1.2
A general safety guide designed for in-plant AWS Members ......................$15.00
distribution to the welder. Published in 1990, Web Order Code: PCWC
Methods for Sampling and
10 pages.
Analyzing Gases for Welding and The Independent Shops Guide to
OWS ...................................... $20.00 (25 copies)
AWS Members ......................$15.00
Allied Processes Welding Safety and Health
The AWS SH1 Subcommittee on Fumes and Gas As a result of the author's experience as Miller Electric
Web Order Code: AWS OWS
has completed the revision to this important Manufacturings Manager of Technical Publications,
health publication. Using both OSHA and NIOSH this book provides enough straightforward information
Braze Safely analytical methods, this standard covers contami-
Avoid the hazards of brazing processes. This booklet and direction for the smaller operation to weld
nants in the welding environment, including other safely even without the big corporations advantages,
outlines precautionary measures and safe potentially harmful substances such as ozone, car-
practices that promote safety and continued like safety officers and compliance/training programs.
bon monoxide, nitric oxide, nitrogen dioxide, and
productivity. Published in 1992, 14 pages. Using text and help boxes, this Guide starts with
gaseous fluoride. 54 pages, 10 tables, 9 figures,
BRS........................................ $20.00 (25 copies) 8-1/2" x 11", softbound. Uses the International responsibilities of management, then explains
AWS Members ......................$15.00 System of Units (SI). ANSI Approved. protection from hazards associated with welding
Web Order Code: BRS Published in 2003. in a manufacturing environment. This clear-cut
publication concludes with information sources
Guide for Estimating Welding
Emissions for EPA and Ventilation
F1.5M:2003.$44.00
AWS Members$33.00 ! and Web resources than can help even the most
economy-minded operation avoid loss of its most
Web Order Code: F1.5M
Permit Reporting valuable component: manpower. 8-1/2" X 11",
A concise, easily understandable guide to assist Fire Safety in Welding softbound. 38 pages, 1 table, 3 figures, and MSDS/HCP
companies in estimating the emissions from welding and Cutting glossary. Published in 2003. Written by J. D. Jennings,
processes for EPA reporting. Outlines methods of Learn the outline of precautionary measures and Expert Services.
!
estimating airborne emissions from the arc welding safe practices, and help avoid the hazards of fire and SGSH ......................................$44.00
process. Published in 2003, 16 pages and 1 table. AWS Members ......................$33.00
explosion. Published in 1992, 20 pages.
F1.6:2003................................$44.00
AWS Members ......................$33.00 ! FSW ........................................$20.00 (25 copies)
AWS Members ......................$15.00
Web Order Code: SGSH
Web Order Code: F1.6 Arc Welding and Cutting Safely
Web Order Code: FSW
Safety guide every welder should be given. Published
in 1999, 9 pages.
AWS ........................................$20.00 (25 copies)
AWS Members ......................$15.00
Web Order Code: AWS AWS
13
!Available in electronic format. NASA Preferred NASA Pending Department of Defense Adopted
Safety & Health
A Sampling Strategy Guide for Safety and Health
AWS Certification Evaluating Contaminants
in the Welding Environment
Fact Sheets, 3rd Edition
Fact Sheets covering aspects of safety and health applica-
is the welding Provides advice on contaminants that may be present ble to welding and cutting. Includes subjects such as
fumes and gases, radiation, noise, and electrical hazards.
in the welding environment, and presents a strategy
industry's most for collecting valid samples from the welders breath- Updated in 2003.
!
SHF..........................................$44.00
respected sign ing zone. Includes a table of recommendations for
fume analysis for various elements found in AWS filler AWS Members ...................... $33.00
of approval. metal specifications, and a checklist to use in observ-
ing the workplace. 18 pages, published 1999.
Web Order Code: SHF
!
SP............................................ $44.00
records, safety, and responsibilities. AWS Members .................... $15.00
AWS Members ......................$33.00
Web Order Code: F2.2
Web Order Code: AWS SP
LEARN HOW TO BECOME
Effects of Welding on Health
AWS-CERTIFIED. CALL These works review and evaluate research conducted Recommended Practices
800-443-9353, ext. 273 throughout the world on the potential health effects for Electron Beam Welding
associated with physical and chemical hazards produced Process definitions and requirements for electron beam
by different welding processes. They should provide welding are provided, along with safe practices and
industrial hygienists and safety and medical profession- inspection criteria. Common applications of electron
als with the necessary background and knowledge to beam welding also are covered. Thirty-two figures
deploy protective devices and engineering controls effec- include numerous power curves for various alloys. 66
pages, published in 1999.
Food tively and to respond to unique exposure situations.
Research for these volumes has been conducted by high-
ly qualified professionals from organizations including !
C7.1:1999 ................................$68.00
AWS Members ........................$51.00
Processing The Franklin Institute Southwest Research Institute, and
Biomedical Toxicology Associates. You do not have to be
Web Order Code: C7.1
Seguridad en la
Systems a researcher or clinician to read and understand Effects
of Welding on Health, but you do need to be informed.
All books in the series are 8-1/2" x 11", softbound.
Soldadura por Arco
Spanish language version of Arc Welding Safely (AWS).
Published in 1988, 9 pages.
Specification for Welding of AWS-S .................................... $10.00 (25 copies)
NEW: Effects of Welding
Austenitic Stainless Steel Tube and on Health Vol. XII AWS Members ........................ $8.00
Pipe Systems in Sanitary (Hygienic) Twelfth in the series, this volume is divided into Web Order Code: AWS-S
Applications three sections summarizing recent studies of occupa-
This document outlines welding standards for use in tional exposures, information on the human health Ultraviolet Reflectance of Paint
the manufacture and construction of dairy and food effects of welding, and the effects of welding on Data on reflectance of a number of indoor and outdoor
product processing plants. The Committee was formed experimental animals and cell cultures. Includes painted surfaces. Published in 1976, 94 pages.
in response to the request of the 3-A Sanitary Standards
!
216 citations, 13 tables, and 6 figures. ULR ........................................ $56.00
Committee, which develops sanitary design standards Order No. ................................Coverage AWS Members ......................$42.00
for dairy and food processing, packaging, and handling EWH-I.................................. 1940-1977 Web Order Code: ULR
equipment and systems. 10 pages, 2 figures. ANSI EWH-II ................................ 1978-1979
Approved. Published in 1999. EWH-III .............................. 1979-1980 Risk Assessment Guide
!
D18.1:1999 ..............................$44.00 EWH-IV................................ 1980-1982 for Robotic Arc Welding
AWS Members ........................$33.00 EWH-V ................................ 1982-1984 This document provides recommendations and guidelines
Web Order Code: D18.1 EWH-VI................................ 1984-1985 for the safe application of robotic arc welding. Emphasis
EWH-VII .............................. 1986-1987 is placed on conformance of this process with prevailing
EWH-VIII ............................ 1988-1989 industry standards for hazard analysis and proper safe-
Guide to Weld Discoloration EWH-IX .............................. 1990-1991 guarding. Published in 2001, 30 pages, 1 figure.
Levels on Inside of Austenitic
!
EWH-X ..................................1992-1994 D16.3M/D16.3:2001................$32.00
Stainless Steel Tube EWH-XI ................................1995-1996 AWS Members ........................$24.00
Laminated sheet with color illustration showing the EWH-XII ..............................1997-1999 Web Order Code: D16.3M/D16.3
!
degrees of coloration on the inside of an austenitic EWH: I-XII ............................$34.00 each
stainless steel tube with increasing amounts of oxy- AWS Members ......................$26.00 each Fumes and Gases in the Welding
gen in the backing shielding gas. Suitable as a spec- Web Order Code: AWS EWH Environment
ifying tool and a visual inspection guide. ANSI EWH: I-XII Index A research report from 1979 on fumes and gases generat-
!
Approved. Published in 1999. EWH-I (book index). ..........$20.00 ed during welding operations. 246 pages, 82 figures, 99
D18.2:1999............................$32.00 AWS Members. .................... $15.00 tables. Published in 1979. Best copy available (softbound).
AWS Members......................$24.00 Web Order Code: EWH-I
!
Fumes and Gases ................$120.00
!
Web Order Code: D18.2 EWH-ICD (CD index) ..........$48.00 AWS Members ........................$90.00
AWS Members ......................$36.00 Web Order Code: AWS FUMES
Web Order Code: EWH-ICD
14
Compete through smarter welding
Base Metal Weldability
The Practical Reference Guide for the Joining of Practical Reference Guide
Guide for Corrosion of Welds Wrought Nickel-Based Alloys to Welding Metallurgy: Key
The definitive guide to welding metals and alloys not Concepts for Weldability
covered by other standards. Learn the guidelines for Not ready for the depth of
welding different wrought nickel-based alloys, includ- George Linnerts Welding
Metallurgy? Find data books
ing solid-solution and precipitation-hardening alloys.
overloaded? Then this guide
Published in 2002, 48 pages, 17 tables, 5 figures. ANSI is for you. Written for the
approved. engineer new to welding,
!
G2.1M/G2.1:2003 ..................$48.00 as well as for the up-and-
AWS Members ......................$36.00 coming senior technician,
Web Order Code: G2.1M/G2.1 this guide is at just the right
Along with explaining basic corrosion mechanisms,
level to intelligently introduce
Ted Weber, expert witness and AWS lecturer, has Specification for Thermal this sometimes-neglected topic. Several tables and
included several case histories in this 24-page docu- Spraying Zinc Anodes on 32 figures support these topics: metal structures,
ment that draws heavily on his lengthy experience as a Steel Reinforced Concrete metal forms, diffusion, solid solubility, residual
materials expert and troubleshooter for DuPont. Explains metalized zinc cathodic protection systems stress, shielding and purging, phase transformation,
Because realism is important for identifying corrosion for corrosion protection of concrete structures with hardness and hardenability, grain size, stainless
type, digital photography has been used to capture steel reinforcing. It will be useful to departments of steels, aluminum and its alloys, copper and its
most of the 44 full-color examples. Includes pitting and transportation, port facilities, power plants, and other alloys, refractory alloys, and repair welding. 30 pages,
intergranular corrosion; selective leaching, stress cor- operations responsible for repair and maintenance of softbound, published in 1999.
!
rosion cracking, and erosion; and crevice and galvanic concrete structures affected by corrosion of the steel PRGWM....................................$44.00
corrosion. The author tells how to avoid and correct reinforcement. Includes information on job safety, AWS Members......................$33.00
corrosion, including alloying. 8-1/2" x 11", 24 pages, 44 pass/fail reference standards, feedstock materials, Web Order Code: PRGWM
color figures, softbound, published in 1999. needed equipment, and instructions for surface
!
PRGC. ....................................$44.00 preparation, thermal spraying, and quality control. Practical Reference Guide
AWS Members.. ....................$33.00 ANSI Approved. 5 tables, 3 figures, 40 pages, to Welding Titanium
Web Order Code: PRGC published in 2002. Are you hesitant about specifying titanium?
!
C2.20/C2.20M:2002 ................$48.00 If so, this guide dispels the weldability myths.
The Practical Reference AWS Members ........................$36.00 In 11 pages, it succinctly makes short work of
Guide to Welding Aluminum in Web Order Code: C2.20/C2.20M negative perceptions about welding this versatile
Commercial Applications metal. Topics include backing gas shielding,
Specification for Resistance chambers, joint design, equipment, consumables,
Written by Frank Armao, Group Leader, Nonferrous
Applications, The Lincoln Electric Co., this is the sixth
Welding of Carbon filler metal transfer, and special welding conditions
topic in this AWS series. Armao, who serves on the and Low-Alloy Steels for GTAW, GMAW, PAW, electron and laser beam
AWS D1G Subcommittee on Aluminum Structures, Provides for a program covering the minimum shear welding, and resistance welding. Five handy tables.
called on other D1G members for review, with results strength and weld button diameter requirements Compiler/editor Eugene Hornberger used sources
like the following: This is an excellent document for carbon steel and low-alloy steel sheet resistance from AWS, TWI, and NASA and the review and advice
and it will be very useful to the industry. and projection welds. Includes nine sections on a of the International Titanium Association to produce
With an emphasis on the practices that are both variety of subjects, including welding procedure this Guide. 11 pages, softbound, published in 1999.
!
common and effective in high-volume situations, the requirements, pre-production requirements, and PRGT........................................$44.00
publication covers mechanical properties of aluminum safety and health concerns. 6 tables, 5 figures; AWS Members......................$33.00
affected by welding; alloy and temper designations; 20 pages, 8-1/2" x 11", softbound. Published in 1999. Web Order Code: PRGT
filler metal selection; pre-welding preparation; GTAW, ANSI Approved.
!
GMAW, and SMAW; defects; and problems in qualifying C1.4M/C1.4:1999 ..................$44.00 Guide for the Protection of Steel
welding procedures. 14 tables, 24 figures, 38 pages. AWS Members......................$33.00 with Thermal Sprayed Coatings
8-1/2" x 11", softbound. Published in 2002. Web Order Code: C1.4M/C1.4 of Aluminum and Zinc and Their
Alloys and Composites
!
PRGWA ..................................$44.00
AWS Members ......................$33.00 Authoritative guide to select, plan, and control thermal
Web Order Code: PRGWA
Standard sprayed coatings for preservation of steel. Indispensable
for purchasers, architects, managers, supervisors, and
Nothing beats the
convenience of a chart
Reference contractors in construction, marine, railroad, fabrication,
and repair industries. A fill-in-the-blank instruction on how
to use this remarkable industrial process. Features:
Metric Practice Guide for An easy selection guide for various service environments;
Structural Steel Preheat Chart
Suggested Preheat Temperatures for Welding
the Welding Industry 9 critical quality-control check points; 11 important
The most accepted version of the International maintenance and repair steps; 13 key tables; sample job
Structural Steel Materials has welding processes,
System of Units (SI). Included are the base control record; operator qualification and certification;
material thickness and minimum preheat temperatures
units, supplementary units, derived units, and step-by-step surface preparation and thermal spraying
in the Row or X axis. In the Column or Y axis are 18
most important, the rules. Also covered are con- application methods; debris containment and control
structural steel materials, from ASTM A36 to API 5L Gr.
version factors and rules for their use in convert- instructions. A required tool for any professional charged
X42, to Cl.2 to ASTM A517. When you need to know
ing customary inch-pound units to SI units. with analyzing desired service life, environmental enve-
quickly, nothing beats the convenience of a chart.
Recommendations are presented for style and lope, operating duty, and maintenance and repair support
Laminated two-tone. Published in 1996. Desk size is
usage in such areas as prefixes, punctuation, for competitive bidding or internal cost containment.
11" x 17"; wall size is 22" x 28".
number grouping, etc. Includes invaluable sug- 30 pages, published in 1993.
PHSS WC & DC ....................$20.00
!
gestions on managing transition. Published in C2.18-93....................................$48.00
AWS Members ......................$15.00
2001, ANSI Approved, 41 pages. AWS Members ........................$36.00
Web Order Code: PHSS WC & DC
!
A1.1:2001 ..........................$48.00 Web Order Code: C2.18
AWS Members ................$36.00
Web Order Code: A1.1
15
To order or for more information: 800 -854 -7179 or global.ihs.com
Base Metal Weldability
Welding Metallurgy, 4th Edition, Materials and Applications Part 2
Vol. 1: Fundamentals Welding Handbook, 8th Ed., Vol. 4
The premier publication on the welding metallurgy of steels. Volume Four contains considerable expansion of informa-
Comprehensive and encyclopedic in scope, Welding tion provided in previous editions. This expanded coverage
Metallurgy was written by one of Americas most respected has resulted in the presentation of material never before
and informed metallurgical authorities, George E. Linnert. published by the AWS. Like its predecessors, this volume of
Builders, manufacturers, welding shops, colleges, and univer- the Welding Handbook is the ultimate reference tool. The
sities will benefit from this valuable reference book, which
book comes equipped with two separate indexes, and each
places a lifetime of welding research and experience at their
chapter boasts its own Table of Contents. Packed with
fingertips. This is practical insight into the science and tech-
nology of metals. Packed with 248 figures, 62 tables, and 10 more than 500 tables, charts, and photos, it will make your
appendices, this 7" x 10", 950-page volume is truly an out- research efforts easier than ever. Chapters: Carbon and
standing value. Softbound, published in 1994. Low-Alloy Steels; High-Alloy Steels; Coated Steels; Tool and
WM1.4........................................$144.00 Die Steels; Stainless and Heat-Resisting Steels; Clad and The Professionals Advisor on
Dissimilar Metals; Surfacing; Cast Irons; Titanium and
!
AWS Members..........................$108.00 Welding of Stainless Steels
Web Order Code: WM1.4 Titanium Alloys; Reactive, Refractory, and Precious Metals Over 100 pages of need-to-know information on stainless
and Alloys. Published in 1998. 621 pages, 8-1/2" x 10-1/2", steels. While it addresses mainly the austenitic stainless
Standard Methods for Calibrating hardbound. steels (200 and 300 series), this Advisor doesnt neglect
!
Magnetic Instruments to Measure the WHB-4.8 ....................................$156.00 the ferritics and martensitics (400 series) or the precipi-
Delta Ferrite Content of Austenitic and AWS Members..........................$117.00 tation hardening series and the duplex stainless steels in
Web Order Code: WHB-4.8
Duplex Ferritic-Austenitic Stainless its 10 tabbed chapters:
Steel Weld Metal Definitions
Calibration procedures include those for the Magnet- Guide for Welding Iron Castings Introduction to Stainless Steels and Types of
Gauge, Ferritescope, and Inspector Gauge, using primary One of the best sources on proven technical practices for Stainless Steels
standards. Measuring ferrite content problems discussed joining iron castings available today. Includes: metallurgy Stainless Steel Filler Materials
in the appendix. Published in 1997, 18 pages. and weldability; gas processes; arc welding processes; Preweld Cleaning and Preparation
ANSI Approved. surfacing and overlaying; welding procedure and perform- Welding and Cutting of Stainless Steels
A4.2M/A4.2:1997 ................ $44.00 ance qualifications; quality control; and safety and health. Postweld Cleaning
!
AWS Members .................... $33.00 Illustrated case histories demonstrate repair and service Heat Treatments
Web Order Code: A4.2M/A4.2 life extension. Also, supplemental safety and health fact Weld Discontinuities and Defects
sheet collection, details, and instructions for weldability Stainless Steels in Welding Codes and Standards
Standard Methods for Determination tests. Features 26 tables and 69 figures, many in full color. Safety and Health Considerations
of the Diffusible Hydrogen Content ANSI Approved. Published in 1989. Contains eight tables on base metal compositions,
of Martensitic, Bainitic, and 15 tables on filler metal and electrode compositions, 15
!
D11.2-89......................................$92.00
Ferritic Steel Weld Metal Produced AWS Members............................$69.00 tables on welding processes including weld joint designs,
by Arc Welding Web Order Code: D11.2 transition currents, typical arc voltages, shielding gases,
Standard 25 x 12 x 80-mm test specimen and method of and typical conditions for GMAW, PAW, FCAW, and SAW
preparation set forth with two standard methods of dif- Welding Zinc-Coated Steels plus four tables on heat treatments and five tables on
fusible hydrogen analysis: mercury displacement and Procedures and safe practices. Published in 1972, codes and standards (including A and F-Number group-
gas chromatography. The methods are suitable for 131 pages. ings, and pre/post heat requirements). Unites important
SMAW, GMAW, FCAW. Published in 1993, 17 pages.
!
WZC ........................................$44.00 information from numerous AWS Codes, filler metal
Reaffirmed in 1997. ANSI Approved. AWS Members ......................$33.00 Specifications and welding process Recommended
A4.3-93R................................ $44.00 Web Order Code: WZC Practices, as well as other sources, including the
!
AWS Members .................... $33.00 renowned Welding Handbook. Compiler/editor
Web Order Code: A4.3 Specification for Dr. Richard Campbell brings the same clarity
Aluminum Brazing and succinctness to this useful guide as he does
The Practical Reference Guide Minimum fabrication, equipment, material, process pro- to his consistently top-rated seminars. 100 pages,
for High Quality Fusion cedure requirements, and defect limits for brazing of alu- 10 tabbed chapters, 47 tables, and 13 figures.
Welding of Aluminum minum by all of the processes commonly used: atmos- 5-1/2" x 8-1/2" spiral bound. Published in 1999.
If you need X-ray-quality aluminum welds, then you phere furnace, vacuum furnace, and flux processes. 20 PASS........................................$68.00
need this newest title in The Practical Reference Guide pages, published in 1999. ANSI Approved. AWS Members ......................$51.00 !
!
series. Written by Bob Schneider, Jr., author C3.7:1999................................$44.00 Web Order Code: AWS PASS
of The Eagle Has Landedwith a Little Help from AWS Members .................... $33.00
Welding, this crisp, succinct publication is meant Web Order Code: C3.7 Materials and Applications - Part 1
to help engineers, designers, and technicians. It is step- Welding Handbook, 8th Ed., Vol. 3
by-step directions in proper use of cleaning tools, Specification for Thermal This volume covers information on nonferrous metals,
assembling, welding procedures. Heres an example: SpraySolid and plastics, composites, ceramics, and new specialized topics:
Abrupt changes in weld bead height such as the Composite Wire and maintenance and repair welding, and underwater welding
termination of a weld bead over a previous weld pass Ceramic Rods and cutting. This 526-page, hardcover book has 10
should be sloped by grinding with a clean router and This specification classifies solid and composite chapters, including safe practices and applications, weld-
vacuumed prior to continuing the weld pass. The wires and ceramic rods for thermal spraying. ability, and applications of specific metals. Colorful figures,
modus operandi here is cleanliness leads to highest Requirements are based on the as-manufactured easy-to-read tables, and an index of major subjects make
quality. 18 pages with photos and illustrations. chemical composition of the wires and rods. this book one of the most practical tools to locate quickly
Published in 2001. Requirements for standard sizes, marking, man- the information you need. 8-1/2" x 10-1/2", published in
PRGQA ..................................$44.00 ufacturing and packaging are included. ANSI 1996.
Web Order Code: PRGQA !
AWS Members ......................$33.00 Approved. 7 tables, 4 figures, 26 pages.
Published in 2002.
!
WHB-3.8 ................................$156.00
AWS Members ......................$117.00
C2.25/C2.25M:2002..........$44.00
AWS Members..................$33.00
Web Order Code: C2.25/C2.25M
! Web Order Code: WHB-3.8
16
To protect your investment, membership will be verified.
Processes & Selection
Soldering Handbook NEW: Recommended Practices Oxygen Cutting Surface
Contains everything relevant to soldering processes, for Gas Tungsten Arc Welding Roughness Gauge and Wall
as well as solder joint performance and reliability. The first completely new treatment of gas tungsten arc weld- Chart for Criteria Describing
Includes fundamentals, technology, materials, sub- ing (GTAW) since 1980, this comprehensive document is an Oxygen-Cut Surfaces
strate materials, fluxes, pastes, assembly processes, indispensable tool for operators, supervisors, trainers, and C4.1 Set....................................$50.00
inspection, and environment. Good coverage of other GTAW professionals. The standard presents recom-
AWS Members ........................$37.00
todays advanced joining applications, the Soldering mended practices for the GTAW process. It provides a funda-
Web Order Code: C4.1 SET
Handbook also emphasizes: mental explanation of the process, describes basic practices
New materials, including higher-strength alloys and concepts, and outlines advanced methods and applica- Operators Manual for
Predictive joint performance tions. These features should help welding personnel deter- Oxyfuel Gas Cutting
Computer modeling mine the best applications of GTAW, and apply it in manual The how-tos of equipment procedures. Concise and
Advanced inspection techniques and automated operations. This edition addresses the pres- easy to understand, the manual highlights safety
New processing concepts, including laser heating ent uses of GTAW in the metal-fabricating industry, new requirements. Twenty figures show torch and nozzle con-
and the resurgence in ultrasonic soldering applications, and advances in research and development. It figurations and examples of production-cut surfaces. 28
provides many practical recommendations on the use of pages, published in 2002. ANSI Approved.
Written by Dr. Paul T. Vianco, Sandia National Lab, as GTAW, and a handy trouble-shooting section. C4.2:2002 .............................. $32.00
a project of the AWS C3 Committee on Brazing and
Soldering, 552 pages, 112 tables, 299 figures,
Contents include:
Process Advantages and Limitations
AWS Members .................... $24.00
Web Order Code: C4.2
!
Equipment and Supplies
softbound, published in 2000.
Tungsten Electrodes
!
SHB................................................$144.00 Operators Manual for Oxyfuel
Gas Shielding, Purging, and Backing
AWS Members ..............................$108.00 Fixturing and Tooling Gas Heating Torch Operations
Web Order Code: SHB Welding Techniques The best and most practical methods for the safe and
Joint Design, Preparation, and Welding Positions effective operation of gas heating torch operations.
Thermal Spraying: Welding Characteristics of Selected Alloys Written for operators, supervisors, and trainers. 10 pages,
Practice, Theory, and Application Quality Control published in 1983.
C4.3-83....................................$32.00
!
An excellent primer on thermal spraying and an expert Troubleshooting and Safety
guide for selecting suitable processes. Emphasis on 130 pages, 22 tables, 79 figures. ANSI Approved. AWS Members .................... $24.00
practical shop and field procedures. Case histories of Published in 2003. Web Order Code: C4.3
C5.5/C5.5M:2003 ....................$80.00
repair and service-life extension, accompanied by job or
project costing formulas and information, are sure to !
AWS Members ....................$60.00
Web Order Code: C5.5/C5.5M
Recommended Practices for Design,
Manufacture, and Examination of
improve your existing method of costing, even if you
are a thermal spraying pro. Has an extensive index, Critical Brazed Components
The Practical Reference ANSI Approved. 2 tables, 32 pages, published in 2002.
bibliography, and glossary, 181 pages, 11 chapters,
Guide to Hardfacing C3.3:2002 .............................. $60.00
48 figures, and 59 tables (including the Materials
!
This is a good introduction to the surfacing process that AWS Members .................... $45.00
Classification Charts), published in 1985. helps protect against wear or corrosion exactly where Web Order Code: C3.3
!
TSS ...................................... $44.00 it's needed. Ready application in the field, economical
AWS Members ......................$33.00 use of expensive alloys, and a hard surface layer that is
Web Order Code: TSS Metric Practice Guide for
supported by a tough substrate to carry the load are
the Welding Industry
more benefits of hardfacing. Excellent companion to
The most accepted version of the International System
Thermal Spray Manual A5.21:2001 Specification for Bare Electrodes and Rods
of Units (SI). Included are the base units, supplemen-
Well-illustrated 180-page manual is the result of a for Surfacing. 4 figures, 12 tables, 21 pages, published
in 2002. tary units, derived units, and most important, the
National Shipbuilding Research Program performed rules. Also covered are conversion factors and rules for
PRGHF ..................................$44.00
!
by Puget Sound Naval Shipyard. Twelve chapters intro- their use in converting customary inch-pound units to
duce the practitioner to thermal spraying, including AWS Members ......................$33.00
Web Order Code: PRGHF SI units. Recommendations are presented for style and
fundamentals, sequencing the job, applications, usage in such areas as prefixes, punctuation, number
processes, coating selection, finishing, training, certifi- grouping, etc. Includes invaluable suggestions on man-
cation and safety. Includes a glossary. Excellent train- Guide for Components of Robotic aging transition. Published in 2001, ANSI Approved, 41
ing manual. 8-1/2" x 11", softcover, published in 1996. and Automatic Welding Installations pages.
! !
TSM ........................................$44.00 Performance recommendations for evaluating compo- A1.1:2001................................$48.00
AWS Members ......................$33.00 nents of a typical robotic or automatic welding installa- AWS Members ......................$36.00
Web Order Code: TSM tion. Emphasis is placed on the role of the welding inter- Web Order Code: A1.1
face. Chapters include arc welding power sources, torches
Specification for Torch Brazing and accessories, dereeling system, shielding gas delivery Specification for the Application
ANSI Approved. Published in 1999, 18 pages. systems, electrode feeding equipment, welding circuit, of Thermal Spray Coatings
!
C3.4:1999 ........................$40.00 communication control wiring, and system grounding.
10 pages of text, 2 tables (including connector pin assign- (Metallizing) of Aluminum, Zinc, and
AWS Members ................$30.00 Their Alloys and Composites for the
Web Order Code: C3.4 ments), 4 figures. Developed in conjunction with the
National Electrical Manufacturers Association and ANSI Corrosion Protection of Steel
Approved. Published in 2001, 13 pages. (Same as NACE No. 12, SSPC-CS 23.00)
Specification for Induction Brazing Suggested for use by owners and design, fabrication,
!
ANSI Approved. Published in 1999, 18 pages. D16.2/D16.2M:2001 ..................$60.00
AWS Members ..........................$45.00 and maintenance engineers to detail and contract for
!
C3.5:1999 ........................$40.00 the application of thermal spray coatings (TSC) for the
Web Order Code: D16.2/D16.2M
AWS Members ................$30.00 preservation and maintenance of steel structures. May
Web Order Code: C3.5 also be used by TSC inspectors and applicators to
Recommended Practices
for Stud Welding develop and maintain application procedures, equip-
Specification for Furnace Brazing ANSI Approved. Published in 1993, 26 pages, ment inventory, and an operator-training program.
ANSI Approved. Published in 1999, 18 pages. 11 tables, 37 figures. Published in 2003, 48 pages, 5 tables, 9 figures.
!
C2.23M/C2.23:2003 ..............$48.00
!
C3.6:1999 ........................$40.00
!
C5.4-93 .................................. $44.00
AWS Members ................$30.00 AWS Members .................... $33.00 AWS Members ......................$36.00
Web Order Code: C3.6 Web Order Code: C5.4 Web Order Code: C2.23M/C2.23
17
!Available in electronic format. NASA Preferred NASA Pending Department of Defense Adopted
Processes & Selection
Recommended Practices Recommended Practices Recommended Practices for Shielding
for Electron Beam Welding for Resistance Welding Gases for Welding and Cutting
Process definitions and requirements for electron Scope includes resistance spot, seam, projection, Covers six industrial gasesargon, carbon dioxide, helium,
beam welding are provided, along with safe practices flash, and upset welding, as well as weld bonding for hydrogen, nitrogen, and oxygenand various mixtures of
and inspection criteria. Common applications of uncoated and coated carbon and low-alloy steels, these gases. Provides specific recommendations for their
electron beam welding also are covered. Thirty-two aluminum alloys, stainless steels, nickel, nickel-base use in conjunction with the processes and materials for
figures include numerous power curves for various alloys, cobalt-base alloys, copper and its alloys, which they may be recommended. Contains useful tables
alloys. 66 pages, published in 1999. and titanium and its alloys. Efficient coverage of that provide guidance on the gases or mixtures that are
AWS Members......................$51.00 !
C7.1:1999 ..............................$68.00 equipment and its set-up, welding variables, joint
preparation, cleaning, welding schedules and
most appropriate for a given process and material. Also
incorporates many safety recommendations, including ref-
Web Order Code: C7.1 parameters, weld quality, testing, safety, and erences to OSHA regulations and NFPA standards. 64
health. 59 tables, 36 figures, 105 pages. 8-1/2" x 11", pages, 8-1/2" x 11" softbound, 17 tables, 26 figures. Uses
Recommended Practices for Laser softbound. ANSI Approved, published in 2000. U.S. Customary and metric. ANSI Approved, published in
2003.
!
Beam Welding, Cutting and Drilling C1.1M/C1.1:2000 ..................$72.00
!
Completely new standard has information on laser AWS Members......................$54.00 C5.10/C5.10M:2003 ................$56.00
welding metallurgy as well as welding, cutting, and Web Order Code: C1.1M/C1.1 AWS Members ........................$42.00
drilling with laser technology. Includes safety consider- Web Order Code: C5.10/C5.10M
ations, equipment descriptions, process control and Recommended Practices
monitoring, record keeping, inspection and testing, for Electrogas Welding Recommended Practices for Air
equipment maintenance, and training. 108 pages, A particularly useful publication with tables that Carbon Arc Gouging and Cutting
published in 1998. ANSI Approved. include procedure specifications and check-lists, Meant to pilot welders and technicians, this newest edition
!
C7.2:1998 ..............................$72.00 and chapters that cover fundamentals, equipment, of a favorite in the Recommended Practices series includes
AWS Members......................$54.00 electrodes (in tandem with AWS A5.26/A5.26M a handy troubleshooting guide as well as Gouging Recom-
Web Order Code: C7.2 Specification for Carbon and Low Alloy Steel mendations. Helps the operator establish the correct air
Electrodes for Electrogas Welding), applications, pressure, amperage, voltage, and techniques. 32 pages, 10
Process Specification and selection of process variables. Serviceable tables, 11 figures, published in 2000. ANSI Approved.
!
for Electron Beam Welding information is also provided on inspection and C5.3:2000..................................$32.00
Sister publication to C7.1 Recommended Practices for AWS Members ........................$24.00
rework, qualifications, and safety. Plus a
Electron Beam Welding, this new standard discusses Web Order Code: C5.3
Troubleshooting Guide. 59 pages, 14 tables,
applicable specifications, safety, requirements, fabrica- 23 figures, 8-1/2" x 11", softbound. ANSI Approved,
tion, quality examination, equipment calibration and published in 2000. International Brazing and Soldering
Conference (IBSC) 2003 Proceedings
!
maintenance, approval and delivery of work. Includes C5.7:2000 ..............................$56.00
sample WPS and PQR forms, as well as an economic AWS Members......................$42.00 Just released by AWS for direct purchase, the
Nondestructive Evaluation Discontinuity Limits chart. Web Order Code: C5.7 International Brazing and Soldering Conference (IBSC)
C7.1 is a best-of-industry practices standard that uses 2003 Proceedings are available on CD-ROM. The contents
should language, while this standard uses shall. 12 Recommended Practices feature the latest work in brazing and soldering science
pages, ANSI Approved. Published in 1999. for Gas Metal Arc Welding and technology from recognized international experts in
the field. Topics range from fundamental metallurgical
AWS Members......................$33.00 !
C7.3:1999 ..............................$44.00 Enormous changes in the technology of this popular
welding process affect your choices. Get the answers research to practical engineering solutions. The proceed-
ings will serve as an excellent source on ceramic and metal
Web Order Code: C7.3 you need for peak productivity. 65 pages, ANSI
joining, modeling and measurements, interfacial reactions
Approved, reaffirmed in 1994.
and properties, materials and process development,
!
The Professionals Advisor C5.6-89R ................................$52.00
process characterization, reliability and testing, and
on Resistance Welding AWS Members ......................$39.00
applications. The goal of the conference was to highlight
This 5-1/2" x 8-1/2" spiral-bound book accompanies the Web Order Code: C5.6 advances in these technical areas. Published in 2003,
busiest professionals on resistance welding worksites. 88 papers, 528 pages on CD-ROM.
Nine chapters address welding definitions, resistance
Recommended Practices
for Friction Welding IBSC..........................................$79.00
welding electrodes, spot and seam welding parameters, AWS Members ........................$59.00
ANSI Approved. Reaffirmed in 1998, 27 pages.
multiple thickness combinations, projection and Web Order Code: AWS IBSC
!
C6.1-89R ................................$52.00
flash welding, defects and their causes in resistance
AWS Members .................... $39.00
welding, testing, safety/health precautions for resist-
Web Order Code: C6.1
Recommended Practices for
ance welding, and more. Chapters are tabbed Plasma Arc Welding
for quick access. 73 pages, published in 1998. Published in 1973, 68 pages.
Uniform Designation System
!
C5.1-73 .................................... $32.00
!
PARW ......................................$68.00
for Oxyfuel Nozzles AWS Members ...................... $24.00
AWS Members ......................$51.00
This new publication proposes a marking system that Web Order Code: C5.1
Web Order Code: PARW
will include the name, registration trademark, correct
fuel gas symbol, nozzle cutting capacity, and a code or Recommended Practices for
Arc Welding with Robots:
part number to permit easy reference to the manufactur- Plasma Arc Cutting and Gouging
Dos and Donts
ers operating data. C4.5M provides a common identifi- With the increasing use of plasma arc cutting for a variety
Outline of the successful use of robots in GMAW
cation system that will result in the safe operation of of metals in industry, this standard is a great tool to opti-
and FCAW applications. Includes charts, check lists,
oxyfuel nozzles, i.e., operators will know they are using mize and troubleshoot your plasma arc cutting operations.
drawings, safety and evaluation criteria, equipment It discusses basics of the process, components, controls,
the correct nozzle for the job being performed. Oxyfuel
choices, installation and training advice. Suitable power supplies, and recommended process consumables
nozzles covered by the document include those for
for operators and process decision-makers. Published and parameters. Methods of optimizing cut quality and
cutting, welding, and heating/brazing. 7 pages, metric,
in 1995, 34 pages. parameter settings are also provided. Furthermore, the
published in 2000. ANSI Approved.
AWR ........................................$20.00 (25 copies) standard discusses safety and health aspects of the process,
AWS Members ......................$15.00
Web Order Code: AWR
!
C4.5M:2000 ............................$28.00
AWS Members ......................$21.00 and associated pollution and hazard control methods. ANSI
Approved, Revised in 2001, 41 pages, 3 tables, 22 figures.
Web Order Code: C4.5M
!
C5.2:2001..................................$64.00
AWS Members ...................... $48.00
Web Order Code: C5.2
18
Compete through smarter welding
Pipe & Tubing
The Practical Reference Guide for Recommended Practices for Recommended Practices for
Welding Inspection Management: Local Heating of Welds in Brazing of Copper Pipe and
Visual Inspection of Pressure Piping and Tubing Tubing for Medical Gas Systems
Vessels and Pressure Piping First revision of this popular standard in a decade ANSI Approved. Published in 2001, 20 pages, 3 tables,
Intended as a planning survey for visual inspectors new to considers both local 360-degree band and spot heat- 1 figure.
major in-service inspections of pressure vessels or pres- ing; thermocouple location, attachment and accura-
!
D10.13/D10.13M:2001.......... $48.00
sure piping. The Practical Reference Guide for Welding cy; insulation provisions; service environment; QA AWS Members .................... $36.00
Inspection Management: Visual Inspection of Pressure system considerations; and radiant heating methods Web Order Code: D10.13/D10.13M
Vessels and Pressure Piping is 28 pages, 8-1/2" x 11", with (induction, electric resistance, flame, exothermic,
an annex on discontinuities. Published in 1999. gas-flame generated infrared, quartz lamps) along Recommended Practices for
with comparisons. The AWS D10 Subcommittee on
!
PRGVT ................................ $44.00
AWS Members .................... $33.00 Local Heat Treating of Pipework states that, the Welding of Chromium-
Web Order Code: PRGVT objective of this document is to present recom- Molybdenum Steel
mended practices based on an ordered assessment Piping and Tubing
Guide for Welding of available research and information, rather than a ANSI Approved. Published in 1996. 12 pages, 4 tables,
Mild Steel Pipe summary of current practice. 16 tables, 23 figures, 1 figure.
!
The mild steel in this AWS standard refers to low- 8 annexes, 116 pages. Offers sample Standard D10.8-96 ................................ $32.00
carbon (less than 0.25% carbon) steels such as ASTM A Procedure for Local Heating form. U.S. Customary AWS Members .................... $24.00
53, A 106, A 135, A 179, A 524, A 587, and API-5L, and metric. Published in 1999. ANSI Approved. Web Order Code: D10.8
!
Grades A25, A and B, and X42. Pipe sizes to be welded D10.10/D10.10M:1999........$68.00
using the procedures of Guide for Welding Mild Steel AWS Members ....................$51.00
Web Order Code: D10.10/D10.10M
Guide for the Gas Shielded
Pipe (D10.12M/ D10.12:2000) are those not greater Arc Welding of Aluminum
than DN 200 (NPS 8) maximum, with wall thicknesses and Aluminum Alloy Pipe
up to 13 mm (0.5 in.) maximum. Examples of applica- Recommended Safe Practices for
Preparation for Welding and Expanded from a Recommended Practice to a Guide,
tions where D10.12M will be particularly useful are this important pipe welding standard reflects the
piping systems such as: Cutting of Containers and Piping
Informs the reader of the necessary safe practices to be present state of the art. Sections include welding
Low pressure heating characteristics of aluminum; processes (GTAW,
Air conditioning used in the cleaning and preparation for welding and
cutting of containers and piping. It describes various DCEN, GMAW, and automatic); materials; preparation;
Refrigeration conditions; backing; technique; heat treatment; and
Water supplies, as well as some methods for cleaning, including water, steam, hot chemi-
cal and mechanical, and techniques to be used for their safety and health. 38 pages, 13 tables, 5 figures.
gas or chemical systems. U.S. Customary Units and metric; pipe sizes listed as
proper preparation, such as inserting. 12 pages, pub-
lished in 1999. ANSI Approved. diameter nominal (DN) and nominal pipe size (NPS).
Techniques for procedures, such as ANSI Approved; published in 2000.
!
Preheating F4.1:1999................................$44.00
!
AWS Members ......................$33.00 D10.7M/D10.7:2000 ..............$56.00
Joint preparation AWS Members ......................$42.00
Alignment and positioning Web Order Code: F4.1
Web Order Code: D10.7M/D10.7
Fittings
Root and hot passes for SMAW, OAW, Recommended Practices for
GTAW, and GMAW. Welding Austenitic Chromium-Nickel Recommended Practices for Gas
Stainless Steel Piping and Tubing Tungsten Arc Welding of
Guide for Welding Mild Steel Pipe is 48 pages ANSI Approved. Reaffirmed 2000, 34 pages. Titanium Piping and Tubing
Incorporates results of work done on the effects of
!
with 10 tables (including Required Filler D10.4-86R.............................. $32.00
Metal per Joint for Mild Steel Pipe) and 19 AWS Members .................... $24.00 atmospheric exposure during welding. Recom-
line drawings and photographs. ANSI Approved, Web Order Code: D10.4 mended maximum exposure temperature has been
published in 2000. Supercedes D10.12-89 lowered and the effects of high-temperature expo-
Recommended Practices and Procedures for Guide to Weld Discoloration sure have been revised. Provides coverage on
Low Carbon Steel Pipe. power sources, tungsten electrodes, titanium base
Levels on Inside of Austenitic
!
D10.12M/D10.12:2000....$44.00 metal grades, filler metals, joint design and prepa-
AWS Members ................$33.00
Stainless Steel Tube ration, pickling and cleaning, fitting and tacking,
Laminated sheet with color illustration showing the preweld cleaning, gas shielding, welding procedures
Web Order Code: D10.12M/D10.12
degrees of coloration on the inside of an austenitic and techniques, and preheat and postweld heat
stainless steel tube with increasing amounts of treatment. Also includes information on weld quali-
Suggested Filler Materials and oxygen in the backing shielding gas. Suitable as a
Minimum Preheat Temperatures ty tests and safety. 28 pages, 7 tables, 4 figures.
specifying tool and a visual inspection guide. ANSI 8-1/2" x 11", published in 2000. ANSI Approved.
for Welding Steel Pipe with Wall Approved, published in 1999.
!
D10.6/D10.6M:2000............$44.00
!
Thickness Less than 3/4" D18.2:1999 ........................$32.00 AWS Members ....................$33.00
Chart set shows base materials including C-steel, AWS Members ..................$24.00 Web Order Code: D10.6/D10.6M
C-Mo, 1/2 to 1-1/4 Cr-Mo, 2-3 Cr-Mo, 3-5 Cr-Mo. Recom- Web Order Code: D18.2
mends electrodes according to welding process used.
Published in 1996. Recommended Practices
AWS PHSP WC & DC ............$20.00 for Root Pass Welding of Pipe
AWS Members ......................$15.00 Without Backing
Web Order Code: AWS PHSP ANSI Approved. Reaffirmed 1992, 20 pages.
D10.11-87R .................... $44.00
AWS Members .............. $33.00 !
Web Order Code: D10.11
19
19
To order or for more information: 800 -854 -7179 or global.ihs.com
Standard Welding Procedure Specifications
! Aluminum Sheet Metal GTAW 10 to 18 gauge None As-Welded, With or Without Backing B2.1-22-015:2002
! Stainless Steel Pipe or Plate SMAW 1/8" 1-1/2" E3XX-XX As-Welded B2.1-8-023-94
! Stainless Steel Pipe or Plate GTAW 1/16" 1-1/2" ER3XX As-Welded B2.1-8-024:2001
! Stainless Steel Pipe or Plate GTAW followed by SMAW 1/8" 1-1/2" ER3XX and E3XX-XX As-Welded B2.1-8-025:2001
! Stainless Steel Pipe GTAW followed by SMAW 1/8" 1-1/2" ER3XXX and E3XX-XX As-Welded B2.1-8-214:2001
! Stainless Steel Pipe GTAW 1/8" 1-1/2" IN3XX and ER3XX As-Welded B2.1-8-215:1998
! Stainless Steel Pipe GTAW followed by SMAW 1/8" 1-1/2" IN3XX and E3XX As-Welded B2.1-8-216;2001
! Stainless Steel Sheet Metal GMAW 10 to 18 gauge ER3XX As-Welded, With or Without Backing B2.1-8-005:2002
! Stainless Steel Sheet Metal GTAW 10 to 18 gauge ER3XX As-Welded, With or Without Backing B2.1-8-009:2002
! Stainless Steel Sheet Metal SMAW 10 to 18 gauge E3XX-XX As-Welded, With or Without Backing B2.1-8-013:2002
! Stainless to Carbon Steel Sheet Metal GMAW 10 to 18 gauge ER309 As-Welded, With or Without Backing B2.1-1/8-006:2002
! Stainless to Carbon Steel Sheet Metal GTAW 10 to 18 gauge ER309 As-Welded, With or Without Backing B2.1-1/8-010:2002
! Stainless to Carbon Steel Sheet Metal SMAW 10 to 18 gauge E3XX-XX As-Welded, With or Without Backing B2.1-1/8-014:2002
! Carbon to Stainless Steel Pipe GTAW 1/16" 1-1/2" ER309 (L) As-Welded B2.1-1/8-227:2002
! Carbon to Stainless Steel Pipe SMAW 1/8" 1-1/2" E309 (L)-15,16, or 17 As-Welded B2.1-1/8-228:2002
! Carbon to Stainless Steel Pipe GTAW and SMAW 1/8" 1-1/2" ER309 (L) and E309 (L)-
15,16, or 17 As-Welded B2.1-1/8-229:2002
! Carbon to Stainless Steel Pipe GTAW, consumable insert 1/16" 1-1/2" IN309, ER309 (L) As-Welded B2.1-1/8-230:2002
IN309, ER309 (L) and
! Carbon to Stainless Steel Pipe GTAW, consumable insert
followed by SMAW 1/8" 1-1/2" E309 (L)-15,16, or 17 As-Welded B2.1-1/8-231:2002
! Carbon Steel Pipe or Plate SMAW 3/16" -- 7/8" E7018 As-Welded, With or Without Backing B2.1.001-90
! Carbon Steel Pipe or Plate SMAW 1/8" 1-1/2" E7018 As-Welded or PWHT B2.1-1-016-94
! Carbon Steel Pipe or Plate SMAW 1/8" 1-1/2" E6010 As-Welded or PWHT B2.1-1-017-94
! Carbon Steel Pipe or Plate GTAW followed by SMAW 1/8" 1-1/2" ER70S-2 and E7018 As-Welded or PWHT B2.1-1-021-94
! Carbon Steel Pipe or Plate SMAW 1/8" 1-1/2" E6010* and E7018 As Welded or PWHT B2.1-1-026-94
! Carbon Steel Pipe SMAW 1/8" 3/4" E6010 and E7018 As Welded B2.1-1-201-96
! Carbon Steel Pipe SMAW 1/8" 3/4" E6010* and E7018 As Welded B2.1-1-202-96
! Carbon Steel Pipe SMAW 1/8" 1-1/2" E6010 and E7018 As Welded or PWHT B2.1-1-205-96
! Carbon Steel Pipe SMAW 1/8" 1-1/2" E6010* and E7018 As Welded or PWHT B2.1-1-206-96
! Carbon Steel Pipe GTAW 1/8" 1-1/2" ER70S-2 As-Welded or PWHT B2.1-1-207-96
! Carbon Steel Pipe SMAW 1/8" 1-1/2" E7018 As-Welded or PWHT B2.1-1-208-96
! Carbon Steel Pipe GTAW followed by SMAW 1/8" 1-1/2" ER70S-2 and E7018 As-Welded or PWHT B2.1-1-209-96
! Carbon Steel Pipe GTAW, consumable insert 1/8" 1-1/2" INMs-1 and ER70S-2 As-Welded or PWHT B2.1-1-210:2001
! Carbon Steel Pipe GTAW/SMAW, consumable insert 1/8" 1-1/2" INMs-1, E705-2, and
E7018 As-Welded or PWHT B2.1-1-211:2001
! Carbon Steel Pipe or Plate SMAW 1/8" 1-1/2" E6010 and E7018 As-Welded or PWHT B2.1-1-022-94
! Carbon Steel Pipe or Plate FCAW, Self-Shielded 1/8" 1-1/2" E71T-8 As-Welded B2.1-1-018-94
! Carbon Steel Pipe or Plate FCAW, Self-Shielded 1/8" 1/2" E71T-11 As-Welded B2.1-1-027:1998
! Carbon Steel Pipe or Plate FCAW, CO2 Gas-Shielded 1/8" 1-1/2" E70T-1 or E71T-1 As-Welded B2.1-1-019-94
! Carbon Steel Pipe or Plate FCAW, Ar-CO2 Gas-Shielded 1/8" 1-1/2" E70T-1 or E71T-1 As-Welded or PWHT B2.1-1-020-94
*Downhill progression on root pass. All other vertical position passes are uphill.
Specifications printed in red are adopted by ASME with additional requirements.
20
To protect your investment, membership will be verified.
Standard Welding Procedure Specifications
TO FINE TUNE. AWS STANDARD WPSs DO THE QUALIFYING WORK FOR YOU.
BASE METAL FORM PROCESS THICKNESS FILLER METAL CONDITION ORDER NO.
! Carbon Steel Pipe or Plate GTAW 3/16" - 7/8" E70S-2 As-Welded, With or Without Backing B2.1.002-90
! Galvanized Carbon Steel Sheet Metal GMAW 10-18 gauge E70S-6 As-Welded, With or Without Backing B2.1-1-003:2002
! Carbon Steel Sheet Metal GMAW 10-18 gauge E70S-6 As-Welded, With or Without Backing B2.1-1-004:2002
! Galvanized Carbon Steel Sheet Metal GTAW 10-18 gauge E70S-2 or 3 As-Welded, With or Without Backing B2.1-1-007:2002
! Carbon Steel Sheet Metal GTAW 10-18 gauge E70S-2 or 3 As-Welded, With or Without Backing B2.1-1-008:2002
! Galvanized Carbon Steel Sheet Metal SMAW 10-18 gauge E6010 or E6013 As-Welded, With or Without Backing B2.1-1-011:2002
! Carbon Steel Sheet Metal SMAW 10-18 gauge E6010 or E6013 As-Welded, With or Without Backing B2.1-1-012:2002
! Cr-Mo steel Pipe GTAW 1/8" 3/4" ER80S-B2 As-Welded or PWHT ** B2.1-4-217:1999
! Cr-Mo steel Pipe SMAW 1/8" 1-1/2" E8018-B2 As-Welded or PWHT ** B2.1-4-218:1999
! Cr-Mo steel Pipe GTAW followed by SMAW 1/8" 1-1/2" ER80S-B2 and E8018-B2 As-Welded or PWHT ** B2.1-4-219:1999
! Cr-Mo steel Pipe GTAW, consumable insert 1/8" 1-1/2" IN515, ER80S-B2 As-Welded or PWHT ** B2.1-4-220:1999
! Cr-Mo steel Pipe GTAW 1/8" 3/4" ER90S-B3 As-Welded or PWHT ** B2.1-5A-222:1999
! Cr-Mo steel Pipe SMAW 1/8" 1-1/2" E9018-B3 As-Welded or PWHT ** B2.1-5A-223:1999
! Cr-Mo steel Pipe GTAW followed by SMAW 1/8" 1-1/2" ER90S-B3 and E9018-B3 As-Welded or PWHT ** B2.1-5A-224:1999
! Cr-Mo steel Pipe GTAW, consumable insert 1/8" 1-1/2" IN521 and ER90S-B3 As-Welded or PWHT ** B2.1-5A-225:1999
**1/2" As-Welded or PWHT. >1/2", PWHT. Web orders use: Standard welding procedure specification
AWS publishes Standard Welding Procedure Specifications (SWPSs). These specifications were prepared by the Welding Procedures Committee
of the Welding Research Council, and are balloted through the AWS standards development program as American National Standards. Standard
WPSs may be used on work covered by the AWS D1.1 Structural Welding CodeSteel, the National Board Inspection Code, ASME Boiler and
Pressure Vessel Code, as well as in general fabrication work. Those SWPs with red order numbers may be used on ASME Boiler and Pressure
Vessel work with additional requirements. Your license is good for unlimited intracompany distribution.
The one-time AWS SWPS user-license fee is $180 ($240 for nonmembers). Refer to license order number.
Important
D1 RULES Standards for
your D1.1
STRUCTURAL A2.4 Symbols for Welding, Brazing
!
G1.10M:2001..........................$56.00 ANSI Approved. 21 pages, published in 1999.
AWS Members ................$51.00!
BRH ................................$68.00
!
AWS Member ........................$42.00 G1.2M/G1.2:1999..................$44.00
Web Order Code: G1.10M AWS Members......................$33.00 Web Order Code: AWS BRH
Web Order Code: G1.2M/G1.2
22
Compete through smarter welding
Structural
Structural Welding
!
D1.6:1999 ................................$124.00
2002 BRIDGE
WELDING CODE
AWS Members ..........................$93.00
Web Order Code: D1.6
Structural Welding
CodeReinforcing Steel
Fifth edition covers welding reinforcing steel in most rein-
forced concrete applications. Includes allowable stresses,
inspection, qualification, structural details, joint details, Get the latest facts and code
and workmanship requirements. Figures clearly illustrate requirements for bridge building
important welding considerations: unacceptable weld pro-
files, effective weld sizes, details of joints of anchorages, with carbon and low-alloy
base plates, and inserts. 7 chapters, 9 tables, 5 annexes, construction steels.
45 pages, softbound. Published in 1998. ANSI Approved.
!
D1.4-98 .................................. $76.00 The American Welding Society has released the latest version of
AWS Members .................... $57.00 the D1.5 Bridge Welding Code, outlining requirements of the
Web Order Code: D1.4 American Association of State Highway and Transportation
Officials (AASHTO) for building highway bridges made from car-
Suggested Filler Materials bon and low-alloy construction steels. Chapters cover inspection,
for Welding Structural Steels qualification, structural details, stud welding, welded joint
Four welding processes are listed in the Row details, workmanship, and more. This new edition features the
or X axis: SMAW, GMAW, FCAW, and SAW. In the
latest AASHTO revisions and NDE requirements, as well as a sec-
Column or Y axis are 17 structural steels, from
tion providing a Fracture Control Plan for Nonredundant Bridge
ASTM A36 to ASTM A710 Gr. A, Cl.2 to ASTM A517. New Edition Highlights: Members. The 250-page ANSI-approved document contains 35
When you need to know quickly (example: What are Implementation of U.S.
appropriate filler materials for ASTM A53. Gr. B, if tables, 77 figures, and several annexes. Welding and construction
Customary Units professionals and designers will find this book essential for all
youre using SMAW?), nothing beats the convenience Provisions for undermatching
of a chart. Laminated two-tone chart comes as desk forms of bridge work.
electrode usage
and wall set. Added commentary section
D1.5M/D1.5:2002 ................$180.00
!
AWS FMS WC & DC............$20.00
New requirements for the modified
AWS Members ....................$15.00
WPS qualification tests AWS Members ....................$135.00
Web Order Code: AWS FMS WC & DC
Web Order Code: D1.5M/D1.5
Sheet Metal Welding Code
Thanks to the AWS D9 Committee on Welding,
Brazing and Soldering of Sheet Metal, this popular
code is improving workmanship to a 21st century Structural Welding NEW: Structural Welding
level. Covers the arc and braze welding requirements CodeSheet Steel CodeAluminum
for nonstructural sheet metal fabrications. Includes One of the primary objectives of this code is to define The Fourth edition reflects vital updates to code
process procedure qualification; welder/operator per- the allowable capacities used in sheet steel applications requirements and welding inspector qualifications as
formance qualification; workmanship; and inspection. in which the transfer of calculated load occurs. If youre provided in previous editions. This code is the single
Annexes include recommended filler materials; gauge responsible for the welding of steel decks, panels, storage most important reference available on welding require-
numbers and U.S. Customary and SI Unit equivalents; racks, and stud and joist framing members, to name a ments for any type of aluminum alloy structure, with the
WPS and PQR forms; arc and braze welding joint few applications, this code helps you to effect consistently exception of aluminum pressure vessels and fluid-carry-
designs; recommended arc and recommended braze sound welding of joints. Includes allowable load capaci- ing pipelines. A commentary on the code is included
welding practices. 10 tables, 8 figures, 11 annexes, 56 ties, details of welded connections, pre-qualification of and should be used as a guide for the interpretation
pages, published in 2000. ANSI Approved. WPSs, qualification, inspection, stud welding. 7 tables, and application of the code. 216 pages, 27 tables,
!
D9.1M/D9.1:2000..................$72.00 44 figures, 5 annexes and Commentary. 76 pages, 59 figures softbound. ANSI Approved and published
AWS Members......................$54.00 softbound. ANSI Approved and published in 1998. in 2003.
Web Order Code: D9.1M/D9.1
!
D1.3-98 .................................. $92.00 D1.2/D1.2M:2003 ..................$124.00
AWS Members .................... $69.00
Web Order Code: D1.3 ! AWS Members ........................$93.00
Web Order Code: D1.2/D1.2M
23
To order or for more information: 800 -854 -7179 or global.ihs.com
Machinery, Railroad, Automotive
Specification for Welding
Specification for Welding of Presses and Press
Components
Earthmoving and This specification addresses everything from
classification, weld joint design, stresses, and
Construction Equipment tolerances, to welder qualification. Provided are the
current minimum standards and guidelines for the
For self-propelled, on- and off-highway machinery welded fabrication and repair of presses and press
components. A comprehensive 146 pages, 21 tables,
78 figures. 8-1/2" x 11", softbound. Published in 1997.
Examples of applications covered by D14.3 are crawlers, tractors, ANSI Approved.
!
graders, loaders, off-highway trucks, power shovels, backhoes, mobile D14.5-97 ................................$68.00
cranes, and draglines. For complete or partial joint penetration, D14.3/D14.3M:2000 AWS Members ......................$51.00
provides exhaustive illustrations of prequalified welded joints (butt, corner, T-, or combination) for Web Order Code: D14.5
Shielded Metal Arc, Submerged Arc, Gas Metal Arc, and Flux Cored Arc Welding. Variables for pre-
qualified fillet welds are also covered. Heavy emphasis is placed on workmanship and welder qual- Specification for Welded Joints
ification. Provides an annex of forms as well as an annex on Recommended Practices for in Machinery and Equipment
Treatment of Shielded Metal Arc and Flux Cored Arc Electrodes. The directives are skillfully Divides welded joints subjected to static and dynamic
loading into six classes, then examines the require-
illuminated through 41 figures, many detailed enough to be multi-paged. Among the 11 useful
ments for each according to base metal thickness and
tables are Weldability Classification Typical Steel Products and Minimum Preheat and penetration, weld types, and welding process. This
Interpass Temperature for Prequalified Procedures. 108 pages, 42 figures, 11 tables, 5 annexes. guide uses illustrations (charts, tables, drawings)
U.S. Customary Units and metric. ANSI Approved, published in 2000. whenever possible to facilitate understanding.
Includes substantial coverage on qualification
D14.3/D14.3M:2000............................$88.00
AWS Members ................................$66.00 ! (welder, tacker, procedure) and inspection. Published
in 1997, 127 pages, 19 tables, 78 figures. ANSI Approved.
Web Order Code: D14.3/D14.3M
!
D14.4-97 ................................$68.00
AWS Members ......................$51.00
Web Order Code: D14.4
Railroad Welding Specification for Welding
Specification Industrial and Mill Cranes Specification for Welding
Cars and Locomotives and Other Material Handling
To answer the need for an authoritative source, this of Rotating Elements of
Equipment Equipment
specification was produced by all segments of the This extensively illustrated specification applies to the
railroad industry, including both users and suppliers, the This specification applies to the fabrication, by
welding of all principal structural weldments and all
general public, and representatives from the Association welding, of wrought or cast material used in the
primary welds used in the manufacture of cranes for
of American Railroads. Coverage includes welding metal manufacture of rotating elements of equipment,
industrial, mill, powerhouse, and nuclear facilities.
1/8 in.+ in thickness, specific requirements for welding such as fans, pumps, compressors, and centrifuges
All provisions of this specification apply equally to the
railroad cars, and the requirements for the manufactur- used in power generation, propulsion, and material
strengthening and repairing of existing overhead cranes
ing and reconditioning of locomotives and passenger processing. These rotation elements have a link of
and material handling equipment. 52 figures, 21 tables,
train vehicles. 386 pages with 8 appendices (including similarity that is shape more than application i.e.,
10 sections, including Repair and Correction of
base metal groups and filler metal classifications), round shapes from a few inches to 200 inches in
Discontinuities. Three appendices complete this 142-
41 tables, 22 metric tables, 91 figures, 64 metric figures. diameter, with a variety of uses. One particularly useful
page document, published in 1997. ANSI Approved. table among the 11 included in the 101-page book is
!
Published in 2001. ANSI Approved. D14.1-97 ................................ $64.00
D15.1:2001 ..........................$180.00 Grouping of Base Metals for Procedure Qualification.
!
AWS Members .................... $48.00 Illustrated by 29 figures and charts. ANSI Approved.
AWS Members ....................$135.00 Web Order Code: D14.1
Web Order Code: D15.1 Published in 1996.
!
D14.6-96 ................................ $56.00
The Practical Reference AWS Members .................... $42.00
Recommended Practices Guide to Hardfacing Web Order Code: D14.6
for the Welding of Rails and This is a good introduction to the surfacing process
Related Rail Components that helps protect against wear or corrosion exactly
for Use by Rail Vehicles where it's needed. Ready application in the field, eco-
Covers the joining, repair, maintenance and nomical use of expensive alloys, and a hard surface
inspection of rail welds and the welding of related layer that is supported by a tough substrate to carry
weld components. Users, suppliers and representa- the load are more benefits of hardfacing. Excellent
tives of the Association of American Railroads and the companion to A5.21:2001, Specification for Bare
American Railway Engineering Association served on Electrodes and Rods for Surfacing. 4 figures, 12
the authorial AWS Subcommittee on Track Welding. tables, 21 pages, published in 2002.
!
A concise 29 pages with ample illustration through PRGHF ..................................$44.00
charts and figures. Processes include Thermite AWS Members ......................$33.00
Welding and Flash Welding. Contains a special annex Web Order Code: PRGHF
on the welding of austenitic manganese steel.
Published in 2003. ANSI Approved.
!
D15.2:2003 ............................$56.00
AWS Members ......................$42.00
Web Order Code: D15.2
!
D8.6-77 .................................. $44.00 $ Fax this completed form to (305) 443-5647
ONLY ONE SELECTION PLEASE.
Jeffersons Welding
AWS Members .................... $33.00 % Join or renew on our website <www.aws.org/membership> NEW
Encyclopedia (CD-ROM only)
Web Order Code: D8.6 Mr. Ms. Mrs. Dr. Please print Duplicate this page as needed Design and Planning Manual for
Cost-Effective Welding
Last Name ____________________________________________________________________________
Specification for Automotive Soldering Handbook
Welding Metallurgy
and Light Truck Component First Name___________________________________________________________M.I. ______________
Welding Handbook (9th Ed., Vol. 1)
Weld Quality: Arc Welding Title_________________________________________________Birthdate __________________________
The AWS/SAE Joint Committee on Automotive Welding New Member Renewal
Were you ever an AWS Member? YES NO If YES, give year_____and Member # ____________
defines the practical tolerances needed to achieve A free local Section Membership is
included with all AWS Memberships
satisfactory weld quality for production volumes associ- Primary Phone ( )____________________ Secondary Phone ( ) ____________________
Section Affiliation Preference (if known):
ated with automotive structural parts. Covers welding FAX ( )______________________________ E-Mail ______________________________________
of uncoated carbon steels (including HSLA) that do Type of Business (Check ONE only)
Did you learn of the Society through an AWS Member? Yes No
not require preheat or postheat. Limits are set for A Contract construction
If yes, Members name:_________________________________ Members # (if known): ____________ B Chemicals & allied products
various types of discontinuities along with an illustra- C Petroleum & coal industries
D Primary metal industries
tive schematic example. 17 figures, 15 pages. ADDRESS NOTE: This address will be used for all Society mail. E Fabricated metal products
F Machinery except elect. (incl. gas welding)
Published in 1997. ANSI Approved. Company (if applicable) __________________________________________________________________ G Electrical equip., supplies, electrodes
H Transportation equip. air, aerospace
!
D8.8-97 .................................. $44.00 I Transportation equip. automotive
AWS Members ......................$33.00 Address ______________________________________________________________________________ J Transportation equip. boats, ships
K Transportation equip. railroad
Web Order Code: D8.8 L Utilities
Address Cont. __________________________________________________________________________ M Welding distributors & retail trade
N Misc. repair services (incl. welding shops)
City__________________State/Province________Zip/Postal Code _____________Country ____________ O Educational Services (univ., libraries, schools)
Recommended Practices for P Engineering & architectural services (incl. assns.)
NOTE: This data will be used to develop programs and services to Q Misc. business services (incl. commercial labs)
Test Methods for Evaluating PROFILE DATA serve you better. R Government (federal, state, local)
S Other
the Resistance Spot Welding Who pays your dues?: Company Self-paid Sex: Male Female Job Classification (Check ONE only)
Behavior of Automotive Sheet Education level: High school diploma Associates Bachelors Masters Doctoral 01 President, owner, partner, officer
02 Manager, director, superintendent (or assistant)
Steel Materials 03 Sales
PAYMENT INFORMATION (Required) 04 Purchasing
This publication will help predict the performance of all 05 Engineer welding
20 Engineer design
kinds of sheet steel when resistance spot welded for use ONE-YEAR AWS INDIVIDUAL MEMBERSHIP ..................$75 21 Engineer manufacturing
SAVE $25 06 Engineer other
in auto manufacturing. Also addresses equipment setup, TWO-YEAR AWS INDIVIDUAL MEMBERSHIP .............$150 $125 (New Members Only) 10 Architect designer
12 Metallurgist
electrode installation and dressing, electrode endurance New Member? ___Yes ___No 13 Research & development
testing, and current level and range assessment. 22 Quality control
If yes, add one-time initiation fee of $12 ............................................................................$__________ 07 Inspector, tester
65 pages, with 12 tables, 30 figures, and 3 annexes, 08 Supervisor, foreman
Add $25 for book selection ($188 value), and save up to 87%................. $__ ___ __ 14 Technician
8 1/2" x 11", softbound. Published in 2002. ANSI Approved. 09 Welder, welding or cutting operator
(Note: applies to new Individual Members only - Book selections on upper-right corner) 11 Consultant
D8.9M:2002 ............................$64.00 15
!
Educator
TOTAL PAYMENT ....................................................................................................................$___________ 17 Librarian
AWS Members ......................$48.00 16 Student
AWS STUDENT MEMBERSHIP NOTE: Dues include $18.70 for Welding Journal 18 Customer Service
Web Order Code: D8.9M Domestic (Canada & Mexico incl.) ..............................$15 subscription and $4.00 for the AWS Foundation. 19 Other
Technical Interests (Check all that apply)
International....................................................................$50 I do not wish to have $4.00 donated to the AWS Foundation.
Specification for Automotive I realize this does not affect my total payment. A Ferrous metals
TOTAL PAYMENT ....................................................$________ B Aluminum
and Light Truck Components C Nonferrous metals except aluminum
Payment can be made (in U.S. dollars) by check or money order (international or foreign), D Advanced materials/Intermetallics
Weld QualityAluminum Arc payable to the American Welding Society, or by charge card. E Ceramics
F High energy beam processes
Welding Check Money Order Bill Me G Arc welding
H Brazing and soldering
This manufacturing standard for aluminum automo- American Express Diners Club Carte Blanche MasterCard Visa Discover Other I Resistance welding
J Thermal spray
tive components may be especially helpful to small K Cutting
L NDT
Your Account Number Safety and health
suppliers covering the minimum standards for arc Expiration Date (mm/yy) M
N Bending and shearing
welding of aluminum components associated with the Signature of Applicant: Application Date: O Roll forming
P Stamping and punching
body and supporting structural members such as Office Use Only
Check # Account #
Q Aerospace
R Automotive
frames, space frames, cradles, and suspensions. Both Source Code WJ Date Amount S Machinery
T Marine
metric and U.S. Customary units. 21 pages, 6 tables, Two-year Individual Membership Special Offer: applies only to new AWS Individual Members) U Piping and tubing
Discount Publication Offer: applies only to new AWS Individual Members. Select one of the five V Pressure vessels and tanks
15 figures, and 3 informational annexes. ANSI P.O. Box 440367 listed publications for an additional $25; Multi-Year Discount: First year is $75, each additional year is W Sheet metal
Approved. Published in 2000. Miami, FL 33144-0367 $70. No limit on years (not available to Student Members). Student Member: Any individual who X Structures
Telephone (800) 443-9353 attends a recognized college, university, technical, vocational school or high school is eligible. Domestic
Y Other
D8.14M/D8.14:2000..............$56.00 Z Automation
!
FAX (305) 443-5647 Members are those students residing in Norh America (incl. Canada & Mexico). This membership 1 Robotics
AWS Members......................$42.00 Visit our website: www.aws.org includes the Welding Journal magazine. Student Memberships do not include a discounted publication. 2 Computerization of Welding
Airmail Postage Option: International Members may receive their magazines via Airmail by adding $99
Web Order Code: D8.14M Member Services Revised 11/19/02 to the annual dues amount.
25
!Available in electronic format. NASA Preferred NASA Pending Department of Defense Adopted
Filler Material Specifications
Those responsible for filler metal procurement or selection should not be without Save hundreds of dollars on
these crucial specifications. AWS Filler Metal Specifications provide dependable, the whole series of A5 Filler
efficient systems to the purchaser and distributor of filler metals. The classifications Metal Specifications
defined in these standards allow filler metals to be identified uniformly, without All 32 A5 Specifications plus the
consideration of manufacturers trade names or brand names. Filler Metal Procurement Guide.
THESE SPECIFICATIONS PROVIDE: A5-ALL............ $1,132.00
AWS Members...........$849.00
Required tests and testing procedures Product identification and marking AWS A5 Filler Metal Specifications
Standard package forms and weights Each A5 Specification is only $33 for AWS Members are ANSI Approved and
Best use of the filler metal, including operating ranges and $44 for others Dept. of Defense Adopted.
Standard product forms and sizes Wealth of weld operations information in annexes
Ceramics C2.25/C2.25M
Use these codes to order on-line
To order Filler
Metal Comparison
Charts, see page 6.
26
Compete through smarter welding
Filler Material Specifications
Users Guide to Filler Metals
Order Code =D1.1 Designated Nonmembers AWS Members Tips, hints, and general description of filler metals,
intended usage, classification methods, welding
! A5-ALL Package of all A5 Specifications..........................................$1,132.00 ..........................$849.00 procedures and safety considerations, such as:
! A5.01-93R Filler Metal Procurement Guidelines........................................$44.00 ............................$33.00 The electrode should be manipulated so that
! A5.1/A5.1M:2004 Specification for Carbon Steel Electrodes for
Shielded Metal Arc Welding..............................................$44.00 ............................$33.00
the width of the weld bead is no greater than
three times the nominal diameter of the electrode
! A5.10/A5.10M:1999 Specification for Bare Aluminum and Aluminum being used. Also contains Index of Filler Metal
Alloy Welding Electrodes and Rods ..................................$44.00 ............................$33.00 Classifications and Specifications. 114 pages,
! A5.11/A5.11M-97 Specification for Nickel and Nickel Alloy softbound. Published in 1995.
!
Welding Electrodes for Shielded Metal Arc Welding ........$44.00 ............................$33.00 UGFM-95 .............................. $56.00
! A5.12/A5.12M-98 Specification for Tungsten and Tungsten AWS Members .................... $42.00
Alloy Electrodes for Arc Welding and Cutting....................$44.00 ............................$33.00 Web Order Code: UGFM
! A5.13:2000 Specification for Solid Surfacing
Welding Rods and Electrodes ..........................................$44.00 ............................$33.00 Filler Metal
! A5.14/A5.14M-97 Specification for Nickel and Nickel Procurement Guidelines
Alloy Bare Welding Electrodes and Rods ..........................$44.00 ............................$33.00 Essential to todays purchaser. Learn to state clearly,
! A5.15-90R Specification for Welding Electrodes concisely, and completely the required filler metal
and Rods for Cast Iron ....................................................$44.00 ............................$33.00 specification including the heat, lot, testing, and cer-
! A5.16/A5.16M:2004 Specification for Titanium and Titanium Alloy tification requirements. 10 pages, reaffirmed in 1999.
ANSI Approved.
Welding Electrodes and Rods ..........................................$44.00 ............................$33.00
! A5.17/A5.17M-97 !
A5.01-93R ............................ $44.00
Specification for Carbon Steel Electrodes
AWS Members ......................$33.00
and Fluxes for Submerged Arc Welding ............................$44.00 ............................$33.00
Web Order Code: A5.01
! A5.18/A5.18M:2001 Specification for Carbon Steel Filler Metals
for Gas Shielded Arc Welding ..........................................$44.00 ............................$33.00 International Filler Metal
! A5.19-92R Specification for Magnesium Alloy Classifications
Welding Electrodes and Rods ..........................................$44.00 ............................$33.00 This International Index was compiled by the
! A5.2-92R Specification for Carbon and Low Alloy International Institute of Welding (IIW)
Steel Rods for Oxyfuel Gas Welding ..................................$44.00 ............................$33.00 Commissions II and XII and attempts to establish a
! A5.20-95 Specification for Carbon Steel Electrodes generic system for the identification of welding filler
for Flux Cored Arc Welding ..............................................$44.00 ............................$33.00 metals for use in ISO specifications. IIW representa-
! A5.21:2001R Specification for Bare Electrodes and Rods for Surfacing tives from Europe, Japan, China, Australia,
Welding Rods and Electrodes ..........................................$44.00 ............................$33.00 Argentina, and the U.S. collaborated in providing
! A5.22-95 Specification for Stainless Steel Electrodes data from their countries. 64 pages, 42 tables,
for Flux Cored Arc Welding and Stainless Steel 4 figures. Updated in 2002. CD-ROM only.
Flux Cored Rods for Gas Tungsten Arc Welding ................$44.00 ............................$33.00 IFS CD:2002..........................$44.00
! A5.23/A5.23M:1997 Specification for Low Alloy Steel Electrodes AWS Members ......................$33.00
and Fluxes for Submerged Arc Welding ............................$44.00 ............................$33.00 Web Order Code: IFS CD
! A5.24-90R Specification for Zirconium and Zirconium
Alloy Welding Electrodes and Rods ..................................$44.00 ............................$33.00 Nothing beats the convenience of a chart
! A5.25/A5.25M:2003R Specification for Carbon and Low Alloy Steel Suggested Filler Materials
Electrodes and Fluxes for Electroslag Welding..................$44.00 ............................$33.00 for Welding Structural Steels
Four welding processes are listed in the Row or X
! A5.26/A5.26M:2003R Specification for Carbon and Low Alloy Steel
axis: SMAW, GMAW, FCAW, and SAW. In the
Electrodes for Electrogas Welding ....................................$44.00 ............................$33.00
Column or Y axis are 17 structural steels, from
! A5.28-96 Specification for Low Alloy Steel Electrodes and Rods
ASTM A36 to ASTM A710 Gr. A, Cl.2 to ASTM
for Gas Shielded Metal Arc Welding..................................$44.00 ............................$33.00
A517. When you need to know quickly (example:
! A5.29:1998 Specification for Low Alloy Steel Electrodes
What are appropriate filler materials for ASTM
for Flux Cored Arc Welding ..............................................$44.00 ............................$33.00 A53. Gr. B, if youre using SMAW?), nothing beats
A5.3/A5.3M:1999 Specification for Aluminum and Aluminum the convenience of a chart. Laminated two-tone
Alloy Electrodes for Shielded Metal Arc Welding ..............$44.00 ............................$33.00 charts come in wall and desk set.
! A5.30-97 Specification for Consumable Inserts ......................................$44.00 ............................$33.00 AWS FMS WC & DC ..........$20.00
! A5.31-92R Specification for Fluxes for AWS Members ....................$15.00
Brazing and Braze Welding ..............................................$44.00 ............................$33.00 Web Order Code: AWS FMS
! A5.32/A5.32M-97 Specification for Welding Shielding Gases................................$44.00 ............................$33.00
! A5.4-92R Specification for Stainless Steel Electrodes Standard Procedures for
for Shielded Metal Arc Welding ........................................$44.00 ............................$33.00 Determination of Moisture
! A5.5-96 Specification for Low Alloy Steel Electrodes Contents of Welding Fluxes
for Shielded Metal Arc Welding ........................................$44.00 ............................$33.00 and Welding Electrode Flux
! A5.6-84R Specification for Covered Copper and Copper Coverings
Alloy Arc Welding Electrodes............................................$44.00 ............................$33.00 23 Pages, 3 Tables, 4 Figures, ANSI Approved.
! A5.7-84R Specification for Copper and Copper A4.4M: 2001 ..........................$44.00
! A5.8/A5.8M:2003R
Alloy Bare Welding Rods and Electrodes ........................$44.00 ............................$33.00
Specification for Filler Metals Web Order Code: A4.4M
!
AWS Members ......................$33.00
!Available in electronic format. NASA Preferred NASA Pending Department of Defense Adopted 27
MARINE & AEROSPACE
These fit-in-your-pocket
Finally a unifying standard for the aerospace and aircraft industry problem-solvers are just
$9 for AWS Members
Specification for Fusion and only $12 for others.
Welding for Aerospace
Applications
This revolutionary To help, tables on acceptance criteria (one in U.S.
document represents the Customary units, the other in metric) have been Use order code PHB-1
most significant change to included with distinctions for Class A, B, and C welds.
aviation welding
standards in more than 30 years, including coverage D17.1:2001 emphasizes, but is not limited to, fusion
in three areas never addressed in MIL-STDs: design, welding of aluminum-based, nickel-based, iron-based,
repair, and nonflight hardware. And, for the first cobalt-based, magnesium-based, and titanium-based
time, there are authoritative procedures for weld alloys using electric arc and high energy beam
repair of in-service (existing) aerospace flight hard- processes.
ware. In fact, the standards use of weld repair tech- Use order code PHB-2
nology enables weld overhaul beyond the areas origi- 78 pages, 14 tables, 47 figures, 5 annexes, including
nally designated for a weld. Guidelines for Design, Analysis, and Fabrication
of Weld Joints, and Commentary. Metric (SI)
The excellent coverage on inspection is bolstered equivalents provided. ANSI Approved.
with information to avoid both under- and over- Published in 2001.
inspection, arising from the D17 Committees position
!
that, Choosing acceptance criteria beyond the D17.1:2001 ..........................$112.00
capability of the welding process may lead to AWS Members ...................... $84.00 Use order code PHB-3
numerous inspection rejections, increasing costs. Web Order Code: D17.1
!
Hull Welding D3.6M:1999 ............................$72.00
Proven processes, techniques, and procedures for weld- AWS Members ......................$54.00
ing aluminum hulls and related ship structures. The Web Order Code: D3.6M
information presented applies chiefly to the welding of
aluminum hulls that are over 30 ft. (9 m) in length and
made of sheet and plate 3/16 in. (4.8 mm) thick and
greater. The distinction is made because of the different
requirements for welding thin-gauge (less than 3/16 in.) Use order code PHB-7
and thick-gauge (1/4 in. and over) aluminum. 65 pages,
published in 2004. ANSI Approved.
D3.7:2004 .............................. $44.00
!
AWS Members .................... $33.00
Web Order Code: D3.7
Fast Access
Faster Ordering
Fastest Delivery
Breathe easy with Global Engineering
Documents, visit our webstore:
global.ihs.com
or call
800-854-7179
and mention priority code: G051
31
To order or for more information: 800 -854 -7179 or global.ihs.com
INDEX
Code No. Title Code No. Title
PRG Practical Reference Guide to Radiographic C1.4M/C1.4:1999 Specification for Resistance Welding of Carbon and Low-Alloy Steels..15
Interpretation Acceptance Criteria ..................................................12 C3.7:1999 Specification for Aluminum Brazing ....................................................16
PRGC Practical Reference Guide for PASS Professionals Advisor on Welding of Stainless Steels............................16
Corrosion of Welds: Causes and Cures ................................12 & 15 PRGQA The Practical Reference Guide for High Quality
PRGHF Practical Reference Guide To Hardfacing ....................................17 & 24 Fusion Welding of Aluminum ..........................................................16
PRGQA The Practical Reference Guide for High Quality PRGT Practical Reference Guide to Welding Titanium....................................15
Fusion Welding of Aluminum ..........................................................16 PRGVT The Practical Reference Guide for Welding
PRGT Practical Reference Guide to Welding Titanium....................................15 Inspection Management: Visual Inspection
PRGVT The Practical Reference Guide for Welding of Pressure Vessels and Pressure Piping ........................................19
Inspection Management: Visual Inspection PRGWA The Practical Reference Guide to Welding Aluminum
of Pressure Vessels and Pressure Piping ........................................19 in Commercial Applications ............................................................15
PRGWA The Practical Reference Guide to Welding Aluminum PRGWM Practical Reference Guide to Welding Metallurgy:
in Commercial Applications ............................................................15 Key Concepts for Weldability ..........................................................15
PRGWM Practical Reference Guide to Welding Metallurgy: WHB-3.8 Materials and Applications - Part 1
Key Concepts for Weldability ..........................................................15 Welding Handbook, 8th Ed., Vol.3 ..........................................8 & 16
SGSH The Independent Shops Guide to Welding Safety and Health ..............13 WM1.4 Welding Metallurgy, 4th Ed., Vol. 1: Fundamentals ........................6 & 16
UGFM-95 Users Guide to Filler Metals ................................................................27 NICKEL
WPERF WELDPERFECT: The Easy Guide to Perfect Welding ................................8 A5.11/A5.11M-97 Specification for Nickel and Nickel Alloy
HEALTH (SEE ALSO SAFETY) Welding Electrodes for Shielded Metal Arc Welding 27G2.1/G2.1M:2003
EWH-1 through 12 Effects of Welding on Health Vol. I through XII ....................................14 A5.14/A5.14M-97 Specification for Nickel and Nickel Alloy Bare Welding
F1.1:1999 Methods for Sampling Airborne Particulates Electrodes and Rods ......................................................................27
Generated by Welding and Allied Processes ....................................13 D10.4-86R Recommended Practices for Welding Austenitic
F1.2:1999 Laboratory Method for Measuring Fume Generation Chromium-Nickel Stainless Steel Piping and Tubing........................19
Rates and Total Fume Emission for Welding G2.1/G2.1M:2003 Guide for the Joining of Wrought Nickel-Based Alloys..........................15
and Allied Processes ......................................................................13 NONDESTRUCTIVE EXAMINATION (SEE ALSO INSPECTION)
F1.3:1999 A Sampling Strategy Guide for Evaluating B1.10:1999 Guide for the Nondestructive Examination of Welds ............................12
Contaminants in the Welding Environment......................................14 G1.2/G1.2M:1999 Specification for Ultrasonic Welding
F1.5-96 Methods for Sampling and Analyzing Gases for Test Specimen for Thermoplastics..........................................15 & 22
Welding and Allied Processes..........................................................13 PRG Practical Reference Guide to Radiographic
F1.6 Guide for Estimating Welding Emissions for EPA Interpretation Acceptance Criteria ..................................................12
and Ventilation Permit Reporting ....................................................13 URS AWS Ultrasonic Rulers ........................................................................12
F3.2M/F3.2:2001 Ventilation Guide for Weld Fume ........................................................13 OXYFUEL WELDING AND CUTTING
FGW Fumes and Gases in the Welding Environment ....................................14 C4.2:2002 Operators Manual Oxyfuel Gas Cutting ................................................17
SGSH The Independent Shops Guide to Welding Safety and Health ..............13 C4.3-83 Operators Manual for Gas Heating Torch Operations ..........................17
SHF Safety and Health Fact Sheets 3rd Edition ............................................14 C4.5M:2000 Uniform Designation System for Oxyfuel Nozzles..................................18
ULR Ultraviolet Reflectance of Paint ............................................................14 OWS Oxyfuel Gas Welding, Cutting, and Heating Safely ................................13
HYDROGEN CONTENT PLASMA ARC WELDING AND CUTTING
A4.3-93R Standard Methods for Determination of the Diffusible Hydrogen C5.1-73 Recommended Practices for Plasma Arc Welding ................................18
Content of Martensitic, Bainitic, and Ferritic Steel Weld C5.2-:2001 Recommended Practices for Plasma Arc Cutting ..................................18
Metal Produced by Arc Welding......................................................16 C5.10/C5.10M:2003 Recommended Practices for Shielding Gases for
INSPECTION (SEE ALSO NONDESTRUCTIVE EXAMINATION) Welding and Cutting........................................................................18
ARE-8 Symbols for Joining and Inspection........................................................7 PIPING AND TUBING
AWS WI:2000 Welding Inspection Handbook, 3rd Ed..........................................6 & 12 API-M API 1104 Code Clinic Reference Manual ..............................................11
B1.11:2000 Guide for the Visual Examination of Welds ..........................................12 D10.4-86R Recommended Practices for Welding Austenitic
B4.0-98 Standard Methods for Mechanical Testing Chromium-Nickel Stainless Steel Piping and Tubing........................19
of Welds, U.S. Customary-Only ........................................................12 D10.6/D10.6M:2000 Recommended Practices for Gas Tungsten Arc
B4.0M:2000 Standard Methods for Mechanical Testing of Welds, Metric-Only ........12 Welding of Titanium Piping and Tubing ..........................................19
C2.21M/C2.21:2003 Specification for Thermal Spray Equipment Acceptance Inspection ....12 D10.7M/D10.7:2000 Guide for the Gas Shielded Arc Welding of
C3.3:2002 Recommended Practices for Design, Manufacture, and Aluminum and Aluminum Alloy Pipe ..............................................19
Inspection of Critical Brazed Components................................5 & 17 D10.8-96 Recommended Practices for Welding of Chromium-
C3.8-90R Recommended Practices for Ultrasonic Inspection of Brazed Joints ..12 Molybdenum Steel Piping and Tubing ............................................19
D18.2:1999 Guide to Weld Discoloration Levels on Inside of D10.10/D10.10M:1999 Recommended Practices for Local Heating of
Austenitic Stainless Steel Tube ........................................12, 14 & 26 Welds in Piping and Tubing ..........................................................19
HOT HOT-Hands-On Training Test................................................................11 D10.11-87R Recommended Practices for Root Pass Welding of
HST Hands-On, Self-Training ......................................................................11 Pipe Without Backing ....................................................................19
PHB-2 Everyday Pocket Handbook for Visual Inspection D10.12M/D10.12:2000 Guide for Welding Mild Steel Pipe ..................................................19
and Weld Discontinuities Causes and Remedies ........................28 D10.13/D10.13M:2001 Recommended Practices for Brazing of Copper Pipe and
PHB-6 The Everyday Pocket Handbook for Visual Inspection of AWS D1.1-98 Tubing for Medical Gas Systems ....................................................19
Structural Welding Code Fabrication and Welding Requirements....28 D18.1:1999 Specification for Welding of Austenitic Stainless Steel Tube and
PRGC Practical Reference Guide for Pipe Systems in Sanitary (Hygienic) Applications............................14
Corrosion of Welds: Causes and Cures ................................12 & 15 D18.2:1999 Guide to Weld Discoloration Levels on Inside of
PRGVT The Practical Reference Guide for Welding Austenitic Stainless Steel Tube ........................................12, 14 & 26
Inspection Management: Visual Inspection F4.1:1999 Recommended Safe Practices for Preparation for
of Pressure Vessels and Pressure Piping ........................................19 Welding and Cutting of Containers and Piping........................13 & 19
TK Welding Inspectors Tool Kit ................................................................12 PRGVT The Practical Reference Guide for Welding Inspection Management:
VIW-M Visual Inspection Workshop Reference Manual....................................11 Visual Inspection of Pressure Vessels and Pressure Piping ............19
WIT-T:2000 Welding Inspection Technology............................................................11 PLASTICS
WIT-W-99 Welding Inspection Technology (Workbook) ......................................11 G1.2/G1.2M:1999 Specification for Ultrasonic Welding
LASER BEAM WELDING Test Specimen for Thermoplastics..........................................15 & 22
C7.2:1999 Recommended Practices for Laser Beam Welding, G1.10M:2001 Guide for the Evaluation of Hot Gas, Hot Gas Extrusion,
Cutting and Drilling ........................................................................18 and Heated Tool Butt Thermoplastic Welds ....................................22
METALLURGY
PHB-1 Everyday Pocket Handbook for Arc Welding Steel ................................28
32
To protect your investment, membership will be verified.
INDEX
Code No. Title Code No. Title
POWER SOURCES D16.2/16.2M:2001 Guide for Components of Robotic
PAPS The Professionals Advisor on Arc Welding and Automatic Welding Installations ..............................................17
Power Sources and Related Equipment ............................................6 D16.3/D16.3M:2001 Risk Assessment Guide for Robotic Arc Welding ..................................14
PROCESSES D16.4:1999 Specification for Qualification of Robotic Arc Welding Personnel ..........9
PWE Practical Welding Engineer ....................................................................8 SAFETY (SEE ALSO HEALTH and INDIVIDUAL WELDING PROCESS ENTRIES)
WHB-2.8 SP Manual de Soldadura, 8th Ed., Vol. 2, in Spanish ..................................8 AWR Arc Welding with Robots: Dos and Donts ..........................................18
WHB-2.9 Welding Handbook, 9th Ed., Vol. 2, Welding ProcessesPart 1............8 AWS Arc Welding and Cutting Safely ............................................................13
WPERF WELDPERFECT: The Easy Guide to Perfect Welding ................................8 AWS-S Seguridad en la Soldadura por Arco ....................................................14
PROFESSIONALS ADVISOR SERIES BRS Braze Safely..........................................................................................13
PAPS The Professionals Advisor on Arc Welding C7.1:1999 Recommended Practices for Electron Beam Welding ..................14 & 18
Power Sources and Related Equipment ............................................6 D16.3/D16.3M:2001 Risk Assessment Guide for Robotic Arc Welding ................................14
PARW The Professionals Advisor on Resistance Welding................................18 F2.2:2001 Lens Shade Selector ............................................................................14
PASS Professionals Advisor on Welding of Stainless Steels............................16 F4.1:1999 Recommended Safe Practices for Preparation for
QUALIFICATION Welding and Cutting of Containers and Piping........................13 & 19
B2.1:2000 Specification for Welding Procedure and Performance Qualification ....9 FSW Fire Safety in Welding and Cutting ........................................................13
B2.1-X-XXXX SWPS, Standard Welding Procedure Specifications ......................20 & 21 OWS Oxyfuel Gas Welding, Cutting, and Heating Safely ................................13
B2.2:91 Standard for Brazing Procedure and Performance Qualification............9 SGSH The Independent Shops Guide to Welding Safety and Health ..............13
B5.1:2003 Specification for the Qualification of Welding Inspectors ......................9 SHF Safety and Health Fact Sheets 3rd Edition ............................................14
B5.2:2001 Specification for the Qualification of Welding Inspector SP Safe Practices ......................................................................................14
Specialists and Welding Inspector Assistants ....................................9 Z49.1:1999 Safety in Welding, Cutting, and Allied Processes ..................................13
B5.5:2000 Specification for the Qualification of Welding Educators ........................9 SHEET METAL
B5.9:2000 Specification for the Qualification of Welding Supervisors......................9 D1.2/D1.2M:2003 Structural Welding CodeAluminum ..................................................23
B5.14:2002 Specification for the Qualification of Welding Sales Representatives ......9 D1.3-98 Structural Welding CodeSheet Steel ................................................23
B5.15:2003 Specification for the Qualification of Radiographic Interpreters ............9 D9.1M/D9.1:2000 Sheet Metal Welding Code ..................................................................23
B5.16:2001 Specification for the Qualification of Welding Engineers ........................9 Standard Welding Procedure Specifications ........................................................................20 & 21
B5.17:2000 Specification for the Qualification of Welding Fabricators ......................9 SHIELDED METAL ARC WELDING
C2.16/C2.16M:2002 Guide for Thermal Spray Operator Qualification ....................................9 Filler Material Specifications ............................................................................................................26 & 27
D16.4:1999 Specification for Qualification of Robotic Arc Welding Personnel ..........9 PHB-7 Everyday Pocket Handbook for Shielded Metal Arc Welding ................28
WQAG Welding Quality Assurance Guideline for Fabricators ..........................12 SHIELDING GASES
RECOMMENDED PRACTICES FOR... C5.10/C5.10M:2003 Recommended Practices for Shielding Gases for
C1.1M/C1.1:2000 Resistance Welding ..............................................................................18 Welding and Cutting........................................................................18
C3.3:2002 Design, Manufacture, and Inspection of Critical Brazed Components ....17 SOLDERING
C5.1-73 Plasma Arc Welding ............................................................................18 SHB Soldering Handbook ............................................................................17
C5.2-:2001 Plasma Arc Cutting ..............................................................................18 SPANISH TITLES
C5.3:2000 Air Carbon Arc Gouging and Cutting ....................................................18 AWS-S Seguridad en la Soldadura por Arco ....................................................14
C5.4-93 Stud Welding ........................................................................................17 A2.4-SP Smbolos Normalizados para Soldeo, Soldeo Fuerte y Examen
C5.5:2003 Gas Tungsten Arc Welding ....................................................................17 No Destructuvo (Spanish edition of AWS A2.4-98) ..................................6
C5.6-89R Gas Metal Arc Welding ........................................................................18 STAINLESS STEEL
C5.7:2000 Electrogas Welding ..............................................................................18 D10.4-86R Recommended Practices for Welding Austenitic
C5.10/C5.10M:2003 Shielding Gases for Welding and Cutting ..............................................18 Chromium-Nickel Stainless Steel Piping and Tubing........................19
C6.1-89R Friction Welding ..................................................................................18 D18.1:1999 Specification for Welding of Austenitic Stainless Steel Tube and
C7.1:1999 Electron Beam Welding ..............................................................14 & 18 Pipe Systems in Sanitary (Hygienic) Applications............................14
C7.2:1999 Laser Beam Welding, Cutting and Drilling ............................................18 D18.2:1999 Guide to Weld Discoloration Levels on Inside of
D8.7-88R Automotive Weld Quality: Resistance Spot Welding ..............................25 Austenitic Stainless Steel Tube ........................................12, 14 & 26
D8.9M:2002 Test Methods for Evaluating the Resistance Spot Welding Filler Material Specifications ......................................................................................26 & 27
Behavior of Automotive Sheet Steel Materials ................................25 PASS Professionals Advisor on Welding of Stainless Steels............................16
D10.4-86R Welding Austenitic Chromium-Nickel Standard Welding Procedure Specifications........................................................................................20, 21
Stainless Steel Piping and Tubing ....................................................19 STEEL (SEE ALSO STAINLESS STEEL and STRUCTURAL WELDING)
D10.6/D10.6M:2000 Gas Tungsten Arc Welding of Titanium Piping and Tubing ..................19 C2.18-93 Guide for the Protection of Steel with Thermal Sprayed Coatings of
D10.8-96 Welding of Chromium-Molybdenum Steel Piping and Tubing ..............19 Aluminum and Zinc and Their Alloys and Composites ....................15
D10.10/D10.10M:1999 Local Heating of Welds in Piping and Tubing ......................................19 D1.1/D1.1M:2004 D1.1 Structural Welding CodeSteel ..........................................4 & 22
D10.11-87R Root Pass Welding of Pipe Without Backing ........................................19 D1.1-BI The Official Book of D1.1 Interpretations ..............................................5
D10.13/D10.13M:2001 Brazing of Copper Pipe and Tubing for Medical Gas Systems ..............19 D1.3-98 Structural Welding CodeSheet Steel ................................................23
F4.1:1999 Preparation for Welding and Cutting of Containers and Piping ....13 & 19 D1.4-98 Structural Welding CodeReinforcing Steel........................................23
REFERENCE (SEE ALSO WELDING HANDBOOK SERIES) D1.5M/D1.5:2002 Bridge Welding Code, All Metric ..........................................................23
A2.4-98 Standard Symbols for Welding, Brazing, and Nondestructive D1.6:1999 Structural Welding CodeStainless Steel ............................................23
Examination......................................................................................6 D3.5-93R Guide for Steel Hull Welding ................................................................28
A3.0:2001 Standard Welding Terms and Definitions................................................8 D10.12M/D10.12:2000 Guide for Welding Mild Steel Pipe ..................................................19
DPW The Design and Planning Manual for Cost-Effective Welding ..................6 Filler Material Specifications ......................................................................................26 & 27
JWE CD Jeffersons Welding Encyclopedia ..........................................................6 PHSS-96 DC & WC Suggested Preheat Temperatures for
SHB Soldering Handbook ............................................................................17 Welding Structural Steel Materials (Desk Chart) ............................15
WM1.4 Welding Metallurgy, 4th Ed., Vol. 1: Fundamentals ........................6 & 16 Standard Welding Procedure Specifications........................................................................................20, 21
RESIDUAL STRESS WZC Welding Zinc-Coated Steels ..................................................................16
ARE-7 Residual Stress and Distortion................................................................7 STUD WELDING
RESISTANCE WELDING C5.4-93 Recommended Practices for Stud Welding ..........................................17
D8.6-77 Standard for Automotive Resistance Spot Welding Electrodes ............25 SURFACING PROCESSES (SEE ALSO THERMAL SPRAYING)
D8.7-88R Recommended Practices for Automotive Weld Quality: Surfacing Rods and Electrodes ..........................................................................................................26 & 27
Resistance Spot Welding ................................................................25 STANDARD SYMBOLS
PARW The Professionals Advisor on Resistance Welding................................18 A2.4-98 Standard Symbols for Welding, Brazing, and Nondestructive
C1.1M/C1.1:2000 Recommended Practices for Resistance Welding ....................................18 Examination......................................................................................6
C1.4M/C1.4:1999 Specification for Resistance Welding of Carbon and Low-Alloy Steels ..15 STANDARD TERMINOLOGY
ROBOTIC WELDING A3.0:2001 Standard Welding Terms and Definitions (includes adhesive bonding,
AWR Arc Welding with Robots: Dos and Donts ..........................................18 brazing, soldering, and thermal spraying) ........................................8
33
To order or for more information: 800 -854 -7179 or global.ihs.com
INDEX
Code No. Title Code No. Title
STANDARD WELDING PROCEDURE SPECIFICATIONS ....................................20 & 21 WHB-2.9 Welding Handbook, 9th Ed., Vol. 2, Welding ProcessesPart 1............8
STRUCTURAL WELDING (SEE ALSO STEEL and STAINLESS STEEL) WHB-3.8 Materials and Applications - Part 1
D1.1/D1.1M:2004 D1.1 Structural Welding CodeSteel ..........................................4 & 22 Welding Handbook, 8th Ed., Vol.3 ..........................................8 & 16
D1.1-BI The Official Book of D1.1 Interpretations ..............................................5 WHB-4.8 Materials and Applications - Part 2
D1.2/D1.2M:2003 Structural Welding CodeAluminum ..................................................23 Welding Handbook, 8th Ed., Vol.4 ..........................................8 & 16
D1.3-98 Structural Welding CodeSheet Steel ................................................23
D1.4-98 Structural Welding CodeReinforcing Steel........................................23 Order Code Index
D1.5M/D1.5:2002 Bridge Welding Code, All Metric ..........................................................23 A1.1:2001 Metric Practice Guide for the Welding Industry ............................5 & 17
D1.6:1999 Structural Welding CodeStainless Steel ............................................23 A2.1-DC & WC Welding Symbols Chart (Desk & Wall Chart)..........................................6
PHB-3 The Everyday Pocket Handbook on Welded Joint A2.4-98 Standard Symbols for Welding, Brazing, and Nondestructive
Details for Structural Applications ..................................................28 Examination......................................................................................6
PHB-6 The Everyday Pocket Handbook for Visual Inspection of AWS D1.1-98 A3.0:2001 Standard Welding Terms and Definitions................................................8
Structural Welding Code Fabrication and Welding Requirements....28 A4.2M/A4.2:1997 Standard Procedures for Calibrating Magnetic Instruments to
TESTING Measure the Delta Ferrite Content of Austenitic and Duplex
C3.2M/C3.2:2002 Standard Method for Evaluating the Strength of Brazed Joints ....12 & 13 Ferritic-Austenitic Stainless Steel Weld Metal ..................................16
B4.0-98 Standard Methods for Mechanical Testing A4.3-93R Standard Methods for Determination of the Diffusible Hydrogen
of Welds, U.S. Customary-Only ........................................................12 Content of Martensitic, Bainitic, and Ferritic Steel Weld
B4.0M:2000 Standard Methods for Mechanical Testing of Welds, Metric-Only ........12 Metal Produced by Arc Welding......................................................16
F1.1:1999 Methods for Sampling Airborne Particulates A4.4M:2001 Standard Procedures for Determination of Moisture Contents
Generated by Welding and Allied Processes ....................................13 of Welding Fluxes and Welding Electrode Flux Coverings................27
F1.2:1999 Laboratory Method for Measuring Fume Generation A5-ALL Package of all A5 Specifications ..........................................................27
Rates and Total Fume Emission for Welding and Allied Processes ..13 A5.01-93R Filler Metal Procurement Guidelines ....................................................27
F1.3:1999 A Sampling Strategy Guide for Evaluating A5.XX.XXXX AWS Filler Metal Specifications by Material and Welding Process ..26 & 27
Contaminants in the Welding Environment......................................14 A5.1M/A5.1:2003 Specification for Carbon Steel Electrodes
F1.5-96 Methods for Sampling and Analyzing Gases for for Shielded Metal Arc Welding ......................................................27
Welding and Allied Processes..........................................................13 A5.10/A5.10M-99 Specification for Bare Aluminum and Aluminum
ARE-6 Test Methods for Evaluating Welded Joints ............................................7 Alloy Welding Electrodes and Rods ................................................27
D8.9M:2002 Recommended Practices for Test Methods for A5.11/A5.11M-97 Specification for Nickel and Nickel Alloy
Evaluating the Resistance Spot Welding Welding Electrodes for Shielded Metal Arc Welding ............................27
Behavior of Automotive Sheet Steel Materials ................................25 A5.12/A5.12M:1998 Specification for Tungsten and Tungsten
THERMAL SPRAYING Alloy Electrodes for Arc Welding and Cutting ..................................27
C2.16/C2.16M:2002 Guide for Thermal Spray Operator Qualification ....................................9 A5.13-00R Specification for Solid Surfacing Welding Rods and Electrodes............27
C2.18-93 Guide for the Protection of Steel with Thermal Sprayed A5.14/A5.14M-97 Specification for Nickel and Nickel Alloy Bare Welding
Coatings of Aluminum and Zinc and Their Alloys and Composites ......15 Electrodes and Rods ......................................................................27
C2.25/C2.25M:2002 Specification for Thermal Spray Solid and A5.15-90 Specification for Welding Electrodes and Rods for Cast Iron................27
Composite Wire and Ceramic Rods........................................16 & 26 A5.16-90R Specification for Titanium and Titanium Alloy
Surfacing Alloys ....................................................................................................................26 & 27 Welding Electrodes and Rods..........................................................27
TSM Thermal Spray Manual ........................................................................17 A5.17/A5.17M-97 Specification for Carbon Steel Electrodes and Fluxes for
TSS Thermal Spraying: Practice, Theory and Application ............................17 Submerged Arc Welding..................................................................27
C2.20/C2.20M:2002 Specification for Thermal Spraying Zinc Anodes on A5.18/A5.18M-01 Specification for Carbon Steel Filler Metals for
Steel Reinforced Concrete ..............................................................15 Gas Shielded Arc Welding ..............................................................27
THERMIT WELDING A5.19-92R Specification for Magnesium Alloy Welding Electrodes and Rods ........27
D15.2-94 Recommended Practices for the Welding of Rails and Related Rail A5.2-92R Specification for Carbon and Low Alloy
Components for Use by Rail Vehicles ..............................................24 Steel Rods for Oxyfuel Gas Welding ................................................27
TRANSPORTATION A5.20-95 Specification for Carbon Steel Electrodes for Flux Cored Arc Welding 27
Aerospace (SEE ALSO RESISTANCE WELDING) A5.21-01R Specification for Composite Surfacing Welding Rods and Electrodes ..27
D17.1:2001 Specification for Fusion Welding for Aerospace Applications ..............28 A5.22-95 Specification for Stainless Steel Electrodes for
Automotive Flux Cored Arc Welding and Stainless Steel
D8.6-77 Standard for Automotive Resistance Spot Welding Electrodes ............25 Flux Cored Rods for Gas Tungsten Arc Welding ..............................27
D8.7-88R Recommended Practices for Automotive Weld Quality: A5.23/A5.23M:1997 Specification for Low Alloy Steel Electrodes
Resistance Spot Welding ................................................................25 and Fluxes for Submerged Arc Welding ..........................................27
D8.8-97 Specification for Automotive and Light Truck A5.24-90R Specification for Zirconium and Zirconium
Weld Quality: Arc Welding ............................................................25 Alloy Welding Electrodes and Rods ................................................27
D8.9M:2002 Recommended Practices for Test Methods for A5.25/A5.25M-03R Specification for Carbon and Low Alloy Steel
Evaluating the Resistance Spot Welding Electrodes and Fluxes for Electroslag Welding................................27
Behavior of Automotive Sheet Steel Materials ................................25 A5.26/A5.26M-03R Specification for Carbon and Low Alloy Steel
D8.14M/:2000 Specification for Automotive and Light Truck Components Electrodes for Electrogas Welding ..................................................27
Weld Quality Aluminum Arc Welding ..........................................25 A5.28-96 Specification for Low Alloy Steel Electrodes
Marine for Gas Shielded Metal Arc Welding ................................................27
D3.5-93R Guide for Steel Hull Welding ................................................................28 A5.29:1998 Specification for Low Alloy Steel Electrodes
D3.6M:1999 Specification for Underwater Welding ..................................................28 for Flux Cored Arc Welding ............................................................27
D3.7-90 Guide for Aluminum Hull Welding........................................................28 A5.3/A5.3M:1999 Specification for Aluminum and Aluminum
Railroads Alloy Electrodes for Shielded Metal Arc Welding ............................27
D15.1:2001 Railroad Welding Specification-Cars and Locomotives ..................5 & 24 A5.30-97 Specification for Consumable Inserts ..................................................27
D15.2-94 Recommended Practices for the Welding of Rails and Related Rail A5.31-92 Specification for Fluxes for Brazing and Braze Welding ......................27
Components for Use by Rail Vehicles ..............................................24 A5.32/A5.32M-9 Specification for Welding Shielding Gases ............................................27
WELDING CURTAINS AND SCREENS A5.4-92 Specification for Stainless Steel Electrodes
F2.3M:2001 Specification for Use and Performance of Transparent for Shielded Metal Arc Welding ......................................................27
Welding Curtains and Screens ........................................................13 A5.5-96 Specification for Low Alloy Steel Electrodes
WELDING HANDBOOK SERIES for Shielded Metal Arc Welding ......................................................27
WHB-1.8 Welding Technology, Welding Handbook, 8th Ed., Vol 1 ........................8 A5.6-84R Specification for Covered Copper and Copper
WHB-1.9 Welding Science and Technology, Welding Handbook, 9th Ed., Vol. 1....8 Alloy Arc Welding Electrodes ..........................................................27
WHB-2.8 SP Manual de Soldadura, 8th Ed., Vol. 2, in Spanish ..................................8
35
Compete through smarter welding
INDEX
Code No. Title Code No. Title
D18.2:1999 Guide to Weld Discoloration Levels on Inside of PHB-3 The Everyday Pocket Handbook on Welded Joint
Austenitic Stainless Steel Tube ..............................................12 & 14 Details for Structural Applications ..................................................28
DPW The Design and Planning Manual for Cost-Effective Welding ..................6 PHB-4 Everyday Pocket Handbook for Gas Metal
EG2.0-95 Guide for the Training and Qualification of Welding Arc and Flux Cored Arc Welding ....................................................28
Personnel: Entry Level Welder ..........................................................9 PHB-5 Everyday Pocket Handbook on Metric
EG3.0-96 Guide for the Training and Qualification of Welding Practices for the Welding Industry ..................................................28
Personnel: Level II Advanced Welder ................................................9 PHB-6 The Everyday Pocket Handbook for Visual Inspection of AWS D1.1-98
EG4.0-96 Guide for the Training and Qualification of Welding Structural Welding Code Fabrication and Welding Requirements....28
Personnel: Level III Expert Welder....................................................9 PHB-7 Everyday Pocket Handbook for Shielded Metal Arc Welding ................28
ELW - Set B (EG3.0-96 and QC11-96) ......................................................................9 PHB-8 Everyday Pocket Handbook for Gas Metal Arc
ELW - Set C (EG4.0-96 and QC12-96) ......................................................................9 Welding (GMAW) of Aluminum ......................................................28
ELW - Set D ECONO Package of 6 documents (EG2.0-95, EG3.0-96, PHSS-96 DC & WC Suggested Preheat Temperatures for
EG4.0-96, QC10-95, QC11-96, QC12-96) ........................................9 Welding Structural Steel Materials (Desk Chart) ............................15
ELW-Set (EG2.0-95 and QC10-95) ......................................................................9 PRG Practical Reference Guide to Radiographic
EWH-1 Effects of Welding on Health Vol. I ......................................................14 Interpretation Acceptance Criteria ..................................................12
EWH-2 Effects of Welding on Health Vol. II......................................................14 PRGC Practical Reference Guide for
EWH-3 Effects of Welding on Health Vol. III ....................................................14 Corrosion of Welds: Causes and Cures ................................12 & 15
EWH-4 Effects of Welding on Health Vol. IV ....................................................14 PRGHF Practical Reference Guide To Hardfacing ....................................17 & 24
EWH-5 Effects of Welding on Health Vol. V ......................................................14 PRGQA The Practical Reference Guide for High Quality
EWH-6 Effects of Welding on Health Vol. VI ....................................................14 Fusion Welding of Aluminum ..........................................................16
EWH-7 Effects of Welding on Health Vol. VII....................................................14 PRGT Practical Reference Guide to Welding Titanium....................................15
EWH-8 Effects of Welding on Health Vol. VIII ..................................................14 PRGVT The Practical Reference Guide for Welding Inspection Management:
EWH-9 Effects of Welding on Health Vol. IX ....................................................14 Visual Inspection of Pressure Vessels and Pressure Piping ............19
EWH-10 Effects of Welding on Health Vol. X ......................................................14 PRGWA The Practical Reference Guide to Welding Aluminum
EWH-11 Effects of Welding on Health Vol. XI ....................................................14 in Commercial Applications ............................................................15
EWH-12 Effects of Welding on Health Vol. XII....................................................14 PRGWM Practical Reference Guide to Welding Metallurgy:
EWH-I Effects of Welding on Health (I-XII Index)..........................................14 Key Concepts for Weldability ..........................................................15
EWH-ICD Effects of Welding on Health (I-XII CD Index) ....................................14 PWE Practical Welding Engineer ....................................................................8
F1.1:1999 Methods for Sampling Airborne Particulates QC1-96 Standard for AWS Certification of Welding Inspectors ..........................10
Generated by Welding and Allied Processes ....................................13 QC4-89 Standard for Accreditation of Test Facilities for AWS
F1.2:1999 Laboratory Method for Measuring Fume Generation Certified Welder Program ..............................................................10
Rates and Total Fume Emission for Welding QC5-91 Standard for AWS Certification of Welding Educators ..........................10
and Allied Processes ......................................................................13 QC7-93 Standard for AWS Certified Welders......................................................10
F1.3:1999 A Sampling Strategy Guide for Evaluating QC10-95 Specification for Qualification and Certification of
Contaminants in the Welding Environment......................................14 Entry Level Welders ..........................................................................9
F1.5M:2003 Methods for Sampling and Analyzing Gases for QC11-96 Specification for Qualification and Certification for
Welding and Allied Processes..........................................................13 Level II - Advanced Welders..............................................................9
F1.6 Guide for Estimating Welding Emissions for EPA QC12-96 Specification for Qualification and Certification for
and Ventilation Permit Reporting ....................................................13 Level III - Expert Welders ................................................................9
F2.2:2001 Lens Shade Selector ............................................................................14 QC17 Standard for Accreditation of Welding Fabricators for
F2.3M:2001 Specification for Use and Performance of Transparent AWS Certified Welding Fabricator Program ....................................10
Welding Curtains and Screens ........................................................13 QC19 Standard for the AWS Certification of Robotic Arc Welding Personnel ..10
F3.2M/F3.2:2001 Ventilation Guide for Weld Fume ........................................................13 SGSH The Independent Shops Guide to Welding Safety and Health ..............13
F4.1:1999 Recommended Safe Practices for Preparation for SHB Soldering Handbook ............................................................................17
Welding and Cutting of Containers and Piping........................13 & 19 SHF Safety and Health Fact Sheets 3rd Edition ............................................14
FGW Fumes and Gases in the Welding Environment ....................................14 SP Safe Practices ......................................................................................14
FMC:2000 Filler Metals Comparison Chart (Book) ................................................6 SWJ-96 Welded Joint Details for Structural Applications ....................................5
FSW Fire Safety in Welding and Cutting ........................................................13 TSM Thermal Spray Manual ........................................................................17
FWSH Design Handbook for Calculating Fillet Weld Sizes ................................8 TSS Thermal Spraying: Practice, Theory and Application ............................17
G1.2/G1.2M:1999 Specification for Ultrasonic Welding UGFM-95 Users Guide to Filler Metals ................................................................27
Test Specimen for Thermoplastics..........................................15 & 22 ULR Ultraviolet Reflectance of Paint ............................................................14
G1.10M:2001 Guide for the Evaluation of Hot Gas, Hot Gas Extrusion, URS AWS Ultrasonic Rulers ........................................................................12
and Heated Tool Butt Thermoplastic Welds ....................................22 VIW-M Visual Inspection Workshop Reference Manual....................................11
G2.1/G2.1M:2002 Guide for the Joining of Wrought Nickel-Based Alloys..........................15 WCE Weld Cost Express................................................................................10
GWF-98 Guide for Setting Up a Welder Training Facility ....................................12 WHB-1.8 Welding Technology, Welding Handbook, 8th Ed., Vol 1 ........................8
HOT HOT-Hands-On Training Test................................................................11 WHB-1.9 Welding Science and Technology, Welding Handbook, 9th Ed., Vol. 1....8
HST Hands-On, Self-Training ......................................................................11 WHB-2.8 SP Manual de Soldadura, 8th Ed., Vol. 2, in Spanish ..................................8
IBSC International Brazing and Soldering WHB-2.9 Welding Handbook, 9th Ed., Vol. 2, Welding ProcessesPart 1............8
Conference (IBSC) 2003 Proceedings ............................................18 WHB-3.8 Materials and Applications - Part 1
JWE CD Jeffersons Welding Encyclopedia ..........................................................6 Welding Handbook, 8th Ed., Vol.3 ..........................................8 & 16
LVOS Lab Validation of Ozone Sampling with Spill Proof Impingers ..............13 WHB-4.8 Materials and Applications - Part 2
OWS Oxyfuel Gas Welding, Cutting, and Heating Safely ................................13 Welding Handbook, 8th Ed., Vol.4 ..........................................8 & 16
PAPS The Professionals Advisor on Arc Welding WHB-ALL Welding Handbook Set ..........................................................................8
Power Sources and Related Equipment ............................................6 WITK Welding Inspectors Tool Kit ................................................................12
PARW The Professionals Advisor on Resistance Welding................................18 WIT-T:2000 Welding Inspection Technology............................................................11
PASS Professionals Advisor on Welding of Stainless Steels............................16 WIT-W-99 Welding Inspection Technology (Workbook) ......................................11
PCWC:2001 Preparing Containers for Welding or Cutting........................................13 WM1.4 Welding Metallurgy, 4th Ed., Vol. 1: Fundamentals ........................6 & 16
NOTE: SOLD IN SETS OF ANY FOUR WPERF WELDPERFECT: The Easy Guide to Perfect Welding ................................8
PHB-1 Everyday Pocket Handbook for Arc Welding Steel ................................28 WQAG Welding Quality Assurance Guideline for Fabricators ..........................12
PHB-2 Everyday Pocket Handbook for Visual Inspection WZC Welding Zinc-Coated Steels ..................................................................16
and Weld Discontinuities Causes and Remedies ........................28 Z49.1:1999 Safety in Welding, Cutting, and Allied Processes................................13
36
To order or for more information: 800 -854 -7179 or global.ihs.com
Order Information
Order AWS publications 6. Standing Orders
The Standing Order program offers an advantage to
through Global Engineering customers who wish to maintain current files of AWS
Documents today its easy! standards and publications. By completing and returning
the Standing Order Agreement form in this catalog, new
Call 800-854-7179 in U.S. and Canada 303-397-7956 and revised versions of documents you have previously
for local and international customers ordered will automatically be shipped to you and invoiced
accordingly. The Standing Order Agreement can be
1. Prepaid Orders canceled at any time. Contact Global for additional
Prepaid orders must include state and local taxes (if from information.
the U.S.), a US$10 processing fee and 5% for freight.
Missing fees will be invoiced to the customer. Please make 7. Sales Tax
checks payable to Global Engineering Documents. All U.S. purchases must include applicable state and local
sales tax. Customers claiming tax exempt status must
2. Avoiding Duplicate Ordering provide Global with a copy of their exemption certificate.
Please do not mail or fax confirmation of an order
placed by telephone. If you order by fax, please do 8. Shipping (U.S. Orders)
not mail a confirmation. Most orders will be shipped the same day. U.S. orders
are shipped via traceable means (primarily UPS ground).
3. Purchase Orders Other delivery options include next-day service, electronic
Purchase orders are accepted from established delivery and fax transmission.
accounts. Invoice will include actual freight cost, a
US$10 processing fee, plus state and local sales tax. 9. Shipping (International Orders)
New accounts with acceptable credit experience are Standard international shipping is by air express (such
welcome. To establish an account, call the Global as DHL or Federal Express).
Sales Department at 800-854-7179 or 303-397-7956.
Or, e-mail global@ihs.com. 10. Returns
All returns must be pre-approved and returned within
4. Deposit Accounts 30 days of invoice date. Please call 800-624-3974,
Receive an additional 10% discount beyond other 303-792-2181 or e-mail globalcustomerservice@ihs.com
quantity discounts on most document orders when you for a return authorization number. Electronically supplied
open a Global Deposit Account. A minimum deposit of products, special orders and age-dated materials may
$500 is required. Call 800-854-7179 or 303-397-7956 not be returned. Shipping and handling charges are non-
or e-mail global@ihs.com for more information. refundable. All returns are subject to a 15% restocking fee.
Get the latest revisions of any standard, specification, or publication you need.
Sign up for our Standing Order Service, and as soon as updates are available
we will automatically ship and bill you for the documents.
Set up your Standing Order Service today by completing the agreement below, or call toll-free:
800-854-7179 (USA/Canada)
Fax: 303-397-2740 (USA applicants only)
(Customers outside the U.S. contact your local Global Info Centre)
38
Compete through smarter welding
Order Form for AWS Publications
For fast service call 800-854-7179 (USA/Canada) Fax: 303-397-2740 (mention priority code Z45)
Bill to: (Please print or type) Ship to: (Please print or type)
Name: ______________________________________________________________________ Name: ______________________________________________________________________
Title:________________________________________________________________________ Title:________________________________________________________________________
Company: ___________________________________________________________________ Company: ___________________________________________________________________
Street: ______________________________________________________________________ Street: ______________________________________________________________________
City: ________________________________________________________________________ City: ________________________________________________________________________
State/Zip:____________________________________________________________________ State/Zip:____________________________________________________________________
Telephone:___________________________________________________________________ Telephone:___________________________________________________________________
Fax: ________________________________________________________________________ Fax: ________________________________________________________________________
E-mail: ______________________________________________________________________ E-mail: ______________________________________________________________________
Please send me the items listed below.
ORDER CODE DESCRIPTION PRICE QTY. TOTAL
Payment Enclosed (make check payable to Global Engineering Documents) Visa MasterCard American Express Discover Diners Club
P.O. # (Enclose Copy): ____________________________ Credit Card # : __________________________________
AWS Member #:____________________________________________ Expiration Date: _________________________________
Charge My Global Account # : ________________________ Name As It Appears On Card: ________________________
YES, I would like to become an AWS member and have included $87 dues and initiation fee with this order. Please Print Duplicate this page as needed.
Name ____________________________________________________________
Type of Business Job Classification
Title ______________________________________________________________ (Check ONE only) (Check ONE only)
A Contract construction 01 President, owner, partner, officer
Organization ______________________________________________________ B Chemicals & allied products 02 Manager, director, superintendent
C Petroleum & coal industries (or assistant)
D Primary metal industries 03 Sales
Address __________________________________________________________ E Fabricated metal products 04 Purchasing
F Machinery except elect. (incl. gas welding) 05 Engineer welding
City ______________________State ______Zip __________________________ G Electrical equip., supplies, electrodes 20 Engineer design
H Transportation equip. air, aerospace 21 Engineer manufacturing
I Transportation equip. automotive 06 Engineer other
Daytime Phone ( ) ____________________________________________ J Transportation equip. boats, ships 10 Architect designer
K Transportation equip. railroad 12 Metallurgist
Fax Number ( ) ______________________________________________ L Utilities 13 Research & Development
M Welding distributors & retail trade 22 Quality Control
N Misc. repair services (incl. welding shops) 07 Inspector, tester
E-Mail ____________________________________________________________ O Educational Services (univ., libraries, schools) 08 Supervisor, foreman
P Engineering & architectural services (incl. assns.) 14 Technician
Major product or service of your organization ____________________________ Q Misc. business services (incl. commercial labs) 09 Welder, welding or cutting operator
R Government (federal, state, local) 11 Consultant
________________________________________________________________ S Other 15 Educator
17 Librarian
16 Student
18 Customer Service
19 Other
39
To order or for more information: 800 -854 -7179 or global.ihs.com
SAVE 25% ON TODAYS
BOOK ORDER
PLUS, GET A $188 PUBLICATION FOR JUST $25
Simply join AWS, the worlds leading society for welding and
fabricating professionals, and take 25% off todays order.
Choose one of our most Access to AWS JobFind at 4 EASY WAYS TO JOIN:
popular publications for just $25 www.aws.org/jobfind weldings 1. Mail application on page 25
Jeffersons Welding ultimate on-line career center with payment, to AWS.
Encyclopedia (CD-ROM) AWS Member certificate and card 2. Fax completed application on
Design and Planning Manual to show your affiliation with the page 25 to (305) 443-5647.
for Cost-Effective Welding worlds premier welding 3. Join on-line at
Welding Metallurgy association www.aws.org/membership.
Welding Handbook Simultaneous membership 4. Call the AWS Membership Dept.
(9th Ed., Vol.1) in a local AWS Section and at (800) 443-9353, ext. 480, or
networking opportunities at (305) 443-9353, ext. 480.
As an AWS Member Section Meetings
youll also enjoy: Member discounts on world-
Monthly subscription to the renowned AWS Certification
award-winning Welding Journal Programs, conferences and
Practical info via The American seminars
Welder, a special WJ section Discounts on American Welder Founded in 1919 to Advance the Science,
geared toward the front-line Gear at www.aws.org/gear Technology and Application of Welding
welder And more
PRSRT STD
U.S. POSTAGE
PAID
15 Inverness Way East Englewood, CO
Permit NO. 109
Englewood CO 80112-5776 USA