Professional Documents
Culture Documents
Predator-IP Installation Manual V1-07
Predator-IP Installation Manual V1-07
Predator-IP Installation Manual V1-07
doc Page 1 of 39
Predator-IP
Installation Manual
Table of Contents
1 Safety and Precautions............................................................................................................5
28 Settings Menu........................................................................................................................27
1 Digital Zoom. 28
2 White Balance. 28
3 External Line Lock. 28
4 Video Gain and Lift. 29
5 Wide Dynamic Range. 29
6 Sunshield. 29
1 Auto Flip. 29
2 Proportional Speed Control. 29
3 Freeze Presets. 29
4 Zoom Speed. 29
5 OSD Preset Six. 30
6 Attack Detect. 30
7 Upright / Inverted Mounting. 30
8 Aperture (day). 30
1 ChangeOver Level. 32
2 Brightness. 32
3 Bright Control 32
1 Illumination. 33
2 Camera 33
3 External Lighting 33
4 Aperture 33
5 Noise Reduction 33
6 Low Light Focus 33
7 Night Presets 33
1 White Lamps. 34
2 White When Alarm. 34
3 White Timeout ON/OFF. 34
4 White Timeout. 34
5 Auto Dimming. 34
6 White Exclusion. 34
7 Power On Park. 34
1 Fast Shutter. 35
2 Slow Shutter. 35
45 Warranty ................................................................................................................................39
Predator-IP_Installation_Manual_V1-07.doc Page 5 of 39
Weight 7.49Kg
b With IR Lamps
Weight 8.39Kg
Predator-IP_Installation_Manual_V1-07.doc Page 7 of 39
c Thermal
Weight 8.5Kg
Weight 8.6Kg
Predator-IP_Installation_Manual_V1-07.doc Page 8 of 39
3 Mounting Options
a Fix Predator-IP to PRED-WBRKT or PRED-PMA using the 4 off M8 x 20 bolts. Use M8 metal washers
under the heads of the bolts.
b Fix PRED-PMA to the top of poles using 4 off M8 bolts with plain washers and lock washers under the
heads. If necessary use M8 self locking nuts (Nylocs) or standard nuts with lock-washers.
c Fix PRED-WBRKT to masonry or concrete using 4 off M8 Rawlbolts, concrete anchors etc. installed
according to the manufacturers instructions. Use plain washers as appropriate to prevent damage.
d Fix PRED-WBRKT to wood surfaces using 8mm shaft coach-screws or coach-bolts, Use plain washers
under the heads of the screws to prevent damage.
e Fix PRED-WBRKT to PRED-CB150 or PRED-PMB using the M8 studs and M8 self locking nuts
(Nylocs). Use M8 metal washers under the nut to prevent damage.
Predator-IP_Installation_Manual_V1-07.doc Page 9 of 39
f For fixing PRED-CB150 to masonry or concrete drill and plug the wall and use 8 off No 10 (5mm dia
shaft) round head wood screws. Use plain washers as appropriate to prevent damage.
g Fix PRED-CB150 to wood surfaces using 8 off No 10 (5mm dia shaft) round head wood screws. Use
plain washers as appropriate to prevent damage.
h The lengths of the bolts should ensure that the bolt protrudes from the surface of the nut, or if bolts are
fitted to blind tapped holes there should be at least 8mm of thread engagement. Wood screws should
engage with wall plugs or wooden surfaces by 25mm or more.
i Take care to ensure that the fixing is strong enough to support the Predator-IP and to be stable in wind
and free from vibrations as these may cause picture defects. The installation should be able to withstand
a 26kg (260N) test force (3x weight of the Predator).
j Before bolting the Predator-IP to the bracket pole etc. connect the socket on the Predator composite
cable to the plug in the Predator-IP.
Predator-IP_Installation_Manual_V1-07.doc Page 10 of 39
It is particularly important that water should not be allowed to pool around the connector, as this will
increase the risk of contamination and corrosion which may cause poor connections.
The connector on the base of the Predator-IP is rated as IP68 when it is correctly connected and the
locking ring is tight.
When using PRED-25M or PRED-40M the distance can be increased to 100m if a Network Switch is fitted
local to the Predator-IP Power Supply.
Connect RJ45 to the ends of the Ethernet cable using the following table:
Disconnect device: The mains cable must be connected to either a switched fused spur, or a socket
outlet using a fused plug.
Strain Relief: All cables must enter the PSU box using cable glands which provide strain relief to the
cables. (The sides of the PSU case have knock-outs to suit M20 and M32 glands).
Outdoor Use: When PSU is fitted outdoors, suitable IP67 cable glands must be used.
MAINS FUSE
MAINS FUSE 1.6AF
OUTPUT FUSE
PRED-PSU-TH-360
FUSE 1 = 2.5AT
PRED-PSU-100-TH-360
FUSE 1 = 4AT
Predator-IP_Installation_Manual_V1-07.doc Page 16 of 39
The Predator-IP telemetry uses the same Ethernet connection that is used for the video pictures.
When powered up the Predator-IP will request an IP address from the DHCP server. If no DHCP is present, a
timout will occur and the static IP address will be used. Default settings are shown in the table.
The Predator-IP and Vision IPDome Browser and can be used to change these settings.
To use the program requires the use of a laptop computer and an Ethernet connection.
The Predator-IP and VisionIPDome browser is supplied in a self extracting zip file on a CD
Make a new directory/folder on the PC (e.g. c:\360Vision).
Copy or save all the Predator-IP and IPDome Browser files to it.
Run the file to extract all the files.
The following list shows the files that will self extract and are needed to run the browser.
dome-viewer-SDK.exe
mingwm10.dll
pthreadGC2.dll
QtCored4.dll
QtGuid4.dll
QtOpenGLd4.dll
These files should be present in the same directory.
Execute dome-viewer-dbg.exe.exe to run the IPDome Browser (no further installation necessary)
See the Predator-IP_and_IPDome_Browser_manual for more details for a description of the available
settings.
Predator-IP_Installation_Manual_V1-07.doc Page 17 of 39
Alternatively, the configuration will be set directly from the application software in the DVR etc.
There are limitations in the CODEC regarding how much MPEG4 encoding can be done, and how many
channels can be used. Suitable settings have been chosen to give good results. Typically the channels
could be used to encode different resolutions or IPS etc. to allow high bandwidth streams for use on local
networks, and lower bandwidth streams for transmission to remote devices. Unused channels should be
disabled.
The available settings for each video stream (channel) are described below:
a ID:
The codec can encode up to four versions of the source simultaneously. These different encoders are
addressed using the ID parameter.
ID can be set to 0, 1, 2, or 3.
b ENABLED:
This parameter determines whether the target encoder is enabled or not.
CODEC:
This parameter determines the codec compression: The 360codec uses MPEG4.
c RESOLUTION:
This parameter sets the size (in pixels) of the encoded stream. It may be set to one of the following:
PAL NTSC
FULL 720x576 720x480
HALF 720x288 720x240
CIF 352x288 352x240
QCIF 176x144 176x120
d DECIMATION:
This controls the number of input frames per output frame. DECIMATION=1 would be full frame rate for
PAL (e.g. 25fps), DECIMATION=2 would be half frame rate (12.5fps).
e RATE:
This controls the bitrate for the data stream for the selected channel (video stream).
f BITRATE:
The BITRATE parameter sets the target bitrate (bits per second) of the encoded stream. RATE and
BITRATE are used together to accommodate bandwidth imitations in the network.
g MAXBITRATE:
This parameter specifies an upper limit on the outgoing bitrate. It is not applicable when RATE is set to
CONSTANT.
h QUANT:
This parameter specifies the quantisation level.
An MPEG4 video stream is made up of a reference field (I-picture) which contains all the information to
produce a single frame image) followed by P-pictures which contain information which enables the
decoder (e.g. in the DVR) to produce the subsequent pictures. The P-pictures contain motion
compensated information which has the consequence that the decoder picture will progressively vary
from the picture from the camera. This is corrected every time the reference field (I-picture) is sent.
I-pictures contain a lot of information which uses a lot of bandwidth when compared to P-picture which
uses a lot less bandwidth. A low GOP number stream requires high bandwidth and gives very good
quality. A high GOP number stream has a much lower bandwidth requirement but the picture quality
could become poorer. MINGOP and MAXGOP are used to maintain a balance between bandwidth and
picture quality.
k QUALITY:
This parameter specifies the quality flags to use for encoding, FASTEST has lower quality and requires
less bandwidth, BEST has highest quality but requires the highest bandwidth.
l SCENE:
This parameter specifies the percentage picture change that should be considered a scene change and
trigger a new GOP.
Double Wipe
Seek 81 Seek 86
The wiper will wipe the window twice and return to the park position.
b Wiper ON Timer
The ON Timer is used to set the time that a wiper command will remain ON before it automatically turns
OFF.
The menu allows setting of hours (h), minutes (m) and seconds (s) up to 72 hours.
Rest Timer and ON timer are set using the Predator Settings menu in the Predator OSD Menus See
Section 19.
Predator-IP_Installation_Manual_V1-07.doc Page 21 of 39
If the Predator is fitted with IR lamps and does not have white lights, the IR lights will switch ON when the
camera switches to MONO.
Select preset 64 to turn IR lights ON if it is dark. This will be ignored if it is NOT dark.
Seek 64 does not switch the camera to mono.
Select preset 66 to turn IR lights OFF if it is dark. This will be ignored if it is NOT dark.
When the brightness of the natural light increases sufficiently, the camera will switch to colour, and if IR
lamps are fitted, they will be switched OFF automatically.
b White Lights.
There are several advantages to be gained by having white lights fitted to the Predator:
When the brightness of the natural light is low, turning white light illumination ON automatically
selects colour pictures which make it easier to identify people and objects.
When white lights are ON, attention is drawn to the Predator which improves the deterrent effect.
If IR illumination is being used, the operator or an automatic alarm can turn the white lights ON
so that people know that they are being watched.
Because the white light lamps are so prominent, care should be taken to site the predator so that
the white lights cant dazzle or distract road users or be a nuisance to local people.
For some installations it may be necessary to only select white light for short periods of time to
reduce the risk of nuisance. (See Section 38 Lamps Setting Menu - White Timeout).
Predator-IP_Installation_Manual_V1-07.doc Page 22 of 39
Select preset 100 (or press A1 on Vision Keyboard) to turn white lights ON and select colour if it is
dark. This will be ignored if it is NOT dark.
Select preset 101 (or press A1 on Vision Keyboard) to turn white lights OFF if it is dark. This will be
ignored if it is NOT dark.
When white lights are turned ON they can be turned OFF automatically after the White Timeout period.
If white lights are still required and it is dark, it is necessary to turn them ON again using preset 100. (See
Section 38 - Lamps Setting Menu - White Timeout). Select White Timeout OFF if this feature is not
required.
If white lights are turned ON, they will automatically turn OFF when the ambient light levels become
bright enough for colour pictures.
Alternatively, select preset 65 to turn white lights ON if it is dark. This will be ignored if it is NOT dark.
Seek 65 does not switch the camera to colour. If white lights have been switched ON using seek 65 the
White timeout timer is not used. The white lights will remain ON until they are turned OFF using seek 66
or ambient light levels become bright enough for colour pictures.
Select preset 66 to turn white lights OFF if it is dark. This will be ignored if it is NOT dark.
When white light lamps are turned ON WHITE LIGHTING ON is displayed on the picture from the
camera.
16 Brightness Control.
This controls exposure compensation, by artificially brightening the picture when the camera is used to
view low light areas. See Section 36.
When Bright Control is set to Preset using OSD menus, Brightness can be turned ON or OFF using
presets.
Preset
number: Brightness control
Seek 240 Turn Brightness ON
Seek 249 Turn Brightness OFF
Predator-IP_Installation_Manual_V1-07.doc Page 23 of 39
Preset
number: Thermal Camera Action
Digital Zoom Selection
Seek 102 Digital Zoom OFF
Seek 103 Set Digital Zoom to x2
Seek 104 Set Digital Zoom to x4
Seek 105 Display blue spot, read spot temperature and display it
Seek 106 Remove spot temperature from the display
Turn OFF all thermal alarms and remove red and green thermal
Seek 107
alarm numbers from the display
MENU
Seek Preset
Start Tour
Start Mimic
Settings Menu
Exit
Use the joystick UP and DOWN to move the highlighted cursor to the Settings Menu item.
For some menus it is necessary to also use joystick RIGHT and LEFT to select an item.
SETTINGS MENU
0123456789
Accept Entry
Clear Entry
Return
Exit
The menus in the Predator have three levels of access which are controlled using PIN numbers.
Use the joystick to move the cursor to the first digit of the PIN number.
Select it using the Zoom IN command by twisting the joystick clockwise.
Repeat until all the digits have been selected.
Use the joystick to move the cursor to Accept Entry and use the Zoom IN command (twisting the
joystick clockwise) to move to the next menu.
Descriptions of the main menus follow. The chart in Section 42 gives a full list.
23 Engineer Menu.
Use the engineer PIN as described above to select the Engineer menu.
Define Tour
Define Mimic
Define Preset
Define Home Function
Settings Menu
Text Field Menu
Servicing
Privacy Zone Menu
Exit
Old gives details of the current setting for a point in the tour.
Use the joystick to select new numbers for the next point in the tour.
Select Start Recording to define the mimic. After the mimic is complete, define a preset to stop
recording the mimic.
Select Accept Entry to define the current view as the new preset.
If Preset Night Settings is enabled (see section 37) the Preset Night Settings menu will appear
whenever a preset is defined. The highlighted item will be Define And Exit. Use the joystick to ZOOM-IN
to accept the displayed defaults and exit the menu.
Predator-IP_Installation_Manual_V1-07.doc Page 27 of 39
27 Home Function.
This feature sets the predator to a preset, tour or mimic after a period of inactivity.
Commands such as pan tilt and camera control will reset the home timer.
Home Action can be set to NONE (default) when the feature is not required.
Alternatively it can be set to any of Presets 1 to 360, Tours 1 to 16 and Mimics 1 to 4.
The Home action timer can be set in the range 0 to 360 minutes (default setting is 10 seconds).
Home action is set up using the Engineer Menu from the Predator On Screen Menus See Section 42.
28 Settings Menu.
This menu is selected from the engineer menu. It gives access to General1 Settings, General2
Settings, General3 Settings, Night Settings, Lamps Settings, Shutter Settings, and Thermal
Settings.
29 Servicing Menu.
This menu has two options.
Power Reset This has the same effect as turning the Predator off and on again. No parameters which
have previously been selected will be lost.
Factory Reset This is a very powerful command that should be used with caution. It clears all saved
parameters, except for protocol and address, and returns the Predator settings to the defaults which
are present on a new Predator.
When this is selected, a further WARNING screen is displayed. Select continue to clear all to the
settings. To preserve the settings select Return or Exit.
The servicing Menu shows the software release number which may be required when contacting
technical support.
Additional Creative Privacy Zone features controlling the size and shape of the privacy zones are
available when using 360 Vision stand alone controllers or matrices.
31 Preset Mapping.
Each of presets 1 to 21 can be allocated to perform functions as listed below.
On the Preset Mapping Menu select the group containing the preset that is to be mapped to a function.
The three groups are, Presets 01 to 07, Presets 08-14 and Presets 15 to 21.
The preset can be set to toggle one of the listed functions from ON to OFF or OFF to ON when a seek to
the preset occurs.
The normal seek action for these presets can be set yo YES or NO.
e.g. Use preset mapping OSD menus to set preset 3 to wiper on with the seek option set to NO.
When the seek preset 3 is activated, the camera will not move to a new position and the wiper will turn
ON. If the wiper was already ON, it will turn OFF.
1 Digital Zoom.
When digital zoom is set OFF (default) and the user zooms IN, the zoom action will stop at the end of
optical zoom and the camera will not select digital zoom. This will avoid the reduction of the picture
quality which can occur when digital zoom is used.
When digital zoom is set ON the user zooms the user zooms IN, the zoom action will pause when the
end of optical zoom is reached. If the user continues to try to zoom IN digital zoom is activated. This
enlarges the picture. Consequently the picture quality will reduce as more digital zoom is used.
2 White Balance.
White balance can be set to AUTO (default), AUTO OUTDOOR, SODIUM (for sodium lighting),
OUTDOOR, INDOOR1, INDOOR2, INDOOR3, INDOOR4 to suit the illumination.
When it is turned ON, it may be necessary to adjust the External Line Lock Phase (range -99 to 100) so
that the picture roll does not occur. It is useful when VCRs and switching matrix (analogue switching) are
used.
If the 360 Vision matrix is being used, turn External Line Lock ON, the phase is adjusted automatically.
Set External Line Lock to OFF (default) if analogue switching is NOT being used, such as when DVRs or
IP codecs are used.
Predator-IP_Installation_Manual_V1-07.doc Page 29 of 39
It can improve the picture when extremes of bright and dark features are present in the picture.
It gives a good advantage when the there is adequate illumination for the dark parts of the picture but
can cause pixilation for some views.
6 Sunshield.
When the sunshield is fitted to a Predator which also has IR or white lights, it is necessary to set the
sunshield parameter to ON. This will set the tilt-up limit so that the Predator will can not hit the
sunshield.
1 Auto Flip.
This feature set how the camera will act when it is tilted fully down. The three available settings are
SEMI, FULL or OFF (default).
SEMI If the joystick is released when the camera has tilted fully down, and then moved down again, the
camera will automatically perform a 180 degree pan.
FULL When the camera is tilted fully down, it will automatically perform a 180 degree pan without the
need to release the joystick
OFF The camera will not automatically perform a 180 degree pan due to tilting the camera down.
3 Freeze Presets.
This feature freezes the picture when the camera performs a fast seek so that indistinct moving pictures
do not get displayed. Pictures that are transmitted to other sites and some DVR recordings would then
use less bandwidth. Often the new picture after the camera stops moving is displayed more quickly.
4 Zoom Speed.
The speed of the zoom can be changed to make it easier to control, and to suit personal preference.
When a camera has increased latency for the telemetry commands, e.g. due to the speed of a
transmission link, set the zoom speed to a lower (slower) number.
When preset 6 is to be redefined during normal use, set OSD preset to OFF, so that the OSD menus
are activated only by define preset 95. They will not be activated when preset 6 is defined.
It is necessary to activate OSD menus by defining preset 95 when OSD Preset Six is to be turned OFF.
6 Attack Detect.
When the pan or tilt is moved due to external factors such as when the Predator is hit by a stone, the
change of position is detected and automatically corrected without the need for the operator to re-adjust
the pan and tilt manually.
Set Attack Detect to ON (default) to enable this feature, or OFF to disable it.
When the Predator is installed hanging downwards, set Upright Mount to OFF.
When Predator is mounted upright (on the top of a pole) set Upright Mount to ON (default).
8 Aperture (day).
This can be used to significantly increase the picture detail particulary when the picture is dark.
Range 0 to 15 (Default = 3).
Aperture during the night is set using the Night2 Settings menu.
Predator-IP_Installation_Manual_V1-07.doc Page 31 of 39
2 Wiper Permanent.
This can be set to ON or OFF (default).
When it is set to ON the Permanent Intermittent and Permanent fast wipe commands can be used.
Set it to off to disable these two commands.
3 FV Text Control.
When Forward Vision protocol is selected, FV Text Control controls the on screen text ANPR.
When OFF (default) ANPR text will be displayed when the fast shutter is turned ON (used with COE
system).
When ON ANPR is turned on and off using forward vision advanced commands (used with ESSA
system).
4 AF AI when PTZ.
This can be set to ON (default) or OFF.
When this is ON, auto focus (AF) and auto iris are automatically selected when pan tilt and zoom
commands occur.
Noise reduction for use at night is set using the Night2 Settings menu.
35 Pelco settings.
Pelco Wiper Aux Key Number.
When Pelco protocol is selected the eight Pelco AUX keys are fully programmable to give on / off control
of eight functions. Each AUX key can be set to one of the following:
1 ChangeOver Level.
The Col/Mon Change can be set to LIGHT, MEDIUM, DARK (default) or CUSTOM.
When CUSTOM is selected, the levels can be set to give the required ChangeOver characteristics.
Mono On has range 7 to 20 (default is 16). (Mono On also means Illumination On).
Mono Off has range 1 to 15 (default is 7). (Mono Off also means Illumination Off).
Lower numbers represent switching at brighter illumination. Higher numbers indicate darker illumination.
2 Brightness.
This controls exposure compensation, by artificially brightening the picture when the camera is used to
view low light areas.
3 Bright Control
1 Illumination.
This can be set to: IR (default), White or OFF.
2 Camera
This can be set to: Mono (default) or Colour.
3 External Lighting
This can be set to YES or NO (default).
4 Aperture
This can be used to significantly increase the picture detail at night.
Range 0 to 15 (Default = 3).
Aperture during the day is set using the General2 Settings menu.
5 Noise Reduction
This can reduce picture noise for pictures which have low levels of illumination. Reducing the noise can
also reduce picture detail. It is necessary to set NR to suit the circumstances.
Noise reduction for use during the day is set using the General3 Settings menu.
7 Night Presets
This feature can be turned ON or OFF (default)
Turn this ON if the illumination of the night time views is different for the different presets. This will allow
illumination (IR/White/OFF) Camera (mono/colour) and External Lighting (YES/NO) to be set for each
separate preset.
When ON and a preset is defined, the Preset Night Settings menu will appear.
When Preset Night Settings is turned OFF, the Predator illumination, camera mono or colour and
External Lighting settings will not change when a seek preset occurs.
Predator-IP_Installation_Manual_V1-07.doc Page 34 of 39
1 White Lamps.
If the Predator is fitted with white lamps, set White Lamps to YES (default), otherwise, set it to NO.
Set White When Alarm to OFF if the IR illumination is to continue during the alarm activity.
Set White Timeout to OFF to prevent the white lights from turning OFF automatically.
4 White Timeout.
The range for this timer is 1 (default) to 99 minutes.
5 Auto Dimming.
Set Auto Dimming to YES so that the Predator illumination will automatically dim if (e.g.) a nearby object
is over illuminated causing over exposure of the view.
6 White Exclusion.
When white exclusion is turned on, the white lights are turned OFF whenever the Predator is in the white
exclusion zone, and can not be turned on manually.
If the night setting is white lights ON, then the white lights will automatically be switched on when the
Predator leaves the white light exclusion zone.
The white light exclusion zone is useful if the Predator is installed near a road or near domestic
premises.
7 Power On Park.
When Power On Park is set to ON, the Predator will automatically seek preset 150 after it is switched ON
(or Power Reset is activated using the OSD Servicing Menu). The Predator will remain in the park
position until the Predator is moved, after which the Home Function will become active.
Predator-IP_Installation_Manual_V1-07.doc Page 35 of 39
39 Fast Shutter.
1 Fast Shutter.
Select fast shutter ON when ANPR (Automatic Number Plate Recognition) is being used.
When it is set ON, the quality of the picture is reduced in low light condition.
Fast shutter speed can be set to 1/10000 (shortest), 1/6000, 1/3500, 1/2500, 1/1750, 1/1250, 1/1000
(default), 1/600, 1/300 (longest).
2 Slow Shutter.
This is the low limit of the slow shutter speed.
Slow shutter can be set to 1/50, 1/25, 1/12, 1/6, 1/3 sec. (default is 1/3)
40 Thermal Settings
This is selected from the settings menu.
When a Predator is fitted with a thermal camera the Thermal settings menu is used to set it up.
See Section 17 for a description of the special presets that are used to control the thermal camera.
a Gain Mode.
The three settings are: Automatic (default), Low Gain and High Gain.
c Thermal Colour.
The twelve settings are: White Hot (default), Black Hot, Fusion, Rainbow, Glowbow, Ironbow 1,
Ironbow 2, Sepia, Colour 1, Colour 2, Ice and fire and Rain.
d Dual Addressing
This option is turned OFF (default) for Predator-IP.
Predator-IP_Installation_Manual_V1-07.doc Page 36 of 39
Up to 20 characters can be set to display on the normal picture from the Predator. (This text is not
available on the thermal camera picture).
Use the joystick left and right to move the cursor. Then use zoom IN to select it.
Replace unwanted characters with blank.
To save the text move the cursor to Accept Changes and Zoom IN.
When complete move the cursor to Return and Zoom IN.
The position of the text can be adjusted by changing the values for X Position and Y Position.
X = 000 and Y = 000 represents the text position being top left on the picture.
Predator-IP_Installation_Manual_V1-07.doc Page 37 of 39
Preset Number --- Tour Number 001 Mimic Number 001 Pin Number ----
PIN number levels:
Controller PINs : 1379
0123456789 0123456789 Engineer PINs : 5498
Accept Entry Start Tour Start Mimic Accept Entry
Clear Entry Return Return Clear Entry
Return Exit Exit Return
Exit Exit
Controller Engineer
Tour 001 Item --- DEFINE MIMIC DEFINE PRESET DEFINE HOME FUNCTION
PreDelSpd
Old ------------------- Mimic Number 001 Preset Number --- Action None
New------------------- Number 001
0123456789 0123456789 Delay Minutes 000
Accept Item Accept Entry Delay Seconds 010
Accept Final Item Start Recording Clear Entry
Clear Item Return Return Accept Changes
Return Exit Exit Return
FINISH MIMIC BY
DEFINING ANY PRESET
General1 Settings Text Field Edit SERVICING PRIVACY ZONE MENU Preset Mapping
General2 Settings --------------------
General3 Settings 0123456789 :ABCDEFG Power Reset Define Privacy Zone Presets 01 to 07
Pelco Settings HIJKLMNOPQRSTUVWXYZ Factory Reset Seek Privacy Zone Presets 08 to 14
Night1 Settings X POSITION: 000 Remove Privacy Zone Presets 15 to 21
Night2 Settings Y POSITION: 000 SPi12P12T0115_010305
Lamps Settings TEXT DISPLAY OFF
Shutter Settings Accept Changes Return Return Return
Thermal Settings Return Exit Exit
Return
General1 General2
Digital Zoom OFF Auto Flip SEMI DEFINE PRIVACY ZONE SEEK PRIVACY ZONE REMOVE PRIVACY ZONE
White Balance OUTAUTO Proportional OFF
Line Lock OFF Freeze Presets ON Privacy Zone -- Privacy Zone -- Privacy Zone --
Line Phase 000 Zoom Speed 008
Video Gain 000 OSD Preset Six YES 0123456789 0123456789 0123456789
Video Lift 000 Attack Detect ON
Wide Dynamic OFF Upright Mount ON Accept Entry Accept Entry Accept Entry
Sunshield OFF Aperture (day) 10 Clear Entry Clear Entry Clear Entry
Accept Changes Accept Changes Return Return Return
Return Return Exit Exit Exit
Wiper Rest (s) 000 Aux1 a)auto focus Col/Mon Change: DARK Night Settings White Lamps YES Fast Shutter OFF Gain Mode
Wiper ON time (h) 000 Aux2 b)digital zoom Mono On 020 Illumination IR White When Alarm ON a: Automatic
Wiper ON time (m) 000 Aux3 c)auto iris Mono Off 013 Camera Mono White Timeout ON Fast Shutter Speed Gain Control Mode
Wiper ON time (s) 000 Aux4 d)ir 1=day 7=dusk 20=dark External Lighting YES White Timeout (m) 001 g:1/1000 a: Histogram
Wiper Permanent OFF Aux5 e)wiper Brightness BRIGHT Aperture 3 Auto Dimming YES Intensity Transform
FV Text Control OFF Aux6 f)washer Bright Control PRESET Noise Reduction 0 White Exclusion YES Slow Shutter 1/3 sec a: White hot
AF AI When PTZ ON Aux7 g)osd Low Light Focus ON Power On Park YES Dual Addressing OFF
Noise Reduct (day) 0 Aux8 h)backlight Night Presets OFF
Accept Changes Accept Changes Accept Changes Accept Changes Accept Changes Accept Changes Accept Changes
Return Return Return Return Return Return Return
Illumination IR
Camera MONO
Ext Lighting YES
Regular cleaning on a maximum three month interval, using warm water and mild detergent must be
undertaken. Abrasive cleaners including strong solvent must NOT be used at any time.
In areas where the coating may come in contact with concentrated atmospheric pollutants [marine,
chemical and especially bird droppings] it would be prudent to clean more frequently. E.g. monthly.
Full documentation of the cleaning schedule MUST be maintained to ensure that a warranty claim can be
considered.
If damage occurs to the coating (e.g. the Predator is dropped, scraped etc.), repairs MUST be carried out
immediately.
When Predator-IP is installed in areas where there is a high risk of damage from birds or their droppings,
additional precautions and measures should be used to keep the birds away from the Predator-IP. E.g. fit
anti-bird spikes to the Predator-IP.
45 Warranty
This information and/or any technical information - whether received verbally or in writing - is given in
good faith but without warranty and this also applies where proprietary rights of third parties are involved.
The information provided does not release you from your obligation to check its validity and to test the
products suitability for the intended purpose(s) and use(s). The application, use and installation of the
products either in isolation or in conjunction with other products used, provided and or installed by you on
the basis of the technical advice issued are beyond our control and therefore remain entirely your own
responsibility.
2013 ALL DESIGNS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE