Professional Documents
Culture Documents
Limits, Fits and Tolerances
Limits, Fits and Tolerances
Question No.32
Show Answer
(B) 0.015 mm
Subject : Metrology and Inspection
Topic : Limits, Fits and Tolerances
Explanation :
Min. Clearance = Min Hole - Max.Shaft (Pin)
=(25+0.020) - (25+0.005)
=25020 - 25.005
=0.015 mm.
GATE - 2014 02
Question No.63
Group A Group B
P. H I. Shaft Type
Q. IT8 II. Hole Type
R. IT7 III. Hole Tolerance Grade
S. g IV. Shaft Tolerance Grade
(A)P-I, Q-III, R-IV, S-II (B)P-I, Q-IV, R-III, S-II (C)P-II, Q-III, R-IV, S-I
Show Answer
+0.040
Show Answer
(C) 20
Subject : Metrology and Inspection
Topic : Limits, Fits and Tolerances
+0.015 +0.010
A hole is dimension 9 +0 mm. The corresponding shaft is of dimension 9 +0.001 mm. The
resulting assembly has
Show Answer
(C) transition t
Subject : Metrology and Inspection
Topic : Limits, Fits and Tolerances
GATE - 2010 01
Question No.20
0.009
Show Answer
What are the upper and lower limits of the shaft represented by 60 f8?
Show Answer
()
Subject : Metrology and Inspection
Topic : Limits, Fits and Tolerances
Question No.58
0.050
GATE - 2007 02
A hole is speci ed as 40 0.000 mm. The mating shaft has a clearance t with minimum clearance of
0.01 mm. The tolerance on the shaft os 0.04 mm. The maximum clearance in mm between the hole
and the shaft is
Show Answer
(C) 0.10
Subject : Metrology and Inspection
Topic : Limits, Fits and Tolerances