Professional Documents
Culture Documents
Galperti Clamp Connector PDF
Galperti Clamp Connector PDF
CLAMP CONNECTORS
Engineering Solutions...
GALPERTI ENGINEERING is an International Company whose business is the design, manufacture and supply
of high integrity connectors, forged fittings and flow control products.
Oil, Gas, Power and Petrochemical Companies utilize our products in a variety of applications, where often
complex technical problems can now be solved cost effectively.
In order to focus our effort upon our Customer requirements, GALPERTI ENGINEERING offer a total design
and manufacturing capability, from our dedicated in-house forge through to finished product, a unique feature
in todays ever demanding global marketplace.
The G-LOK Connector has an estabilished record throughout the world, meeting or exceeding all current in-
dustry codes and standards.
Our facility is accredited with ISO 9001 and our products meet all current industry standards.
The G-LOK Clamp Connector is a fully proven alternative to the conventional flanged connection used throu-
ghout the oil, gas, petrochemical and power generation industries. Produced in a comprehensive range of si-
zes and materials they offer versatility, compactness, weight and cost effectiveness in connecting piping sy-
stem.
The Connector is designed to meet ANSI B 16.5, ASME VIII, API 6A/Q1 and other design codes. The design
has the approval of Lloyds, DNV and Stoomwezen.
20 1
C M G N
The G-LOK Connector is designed to offer the the two hubs, and as they draw the hubs together HEAVY DUTY SERIES
strength and sealing integrity of a welded joint and the seal ring rib ensures proper seal alignment. Clamp material-Low Alloy Steel
the versatility of a mechanical joint. It serves the sa- As the hubs are drawn together by the clamp as-
me purpose as a bolted flange assembly, with the sembly, the seal ring lips deflect against the inner PRESSURE RATING (BAR)
advantages of being more easily installed, lighter sealing surfaces of the hubs. This deflection elastical-
and smaller. ly loads the lips of the seal ring against the inner NOM. G-LOK
20C 50C 100C 150C 150C
A self-energized, pressure activated connection, the sealing surface of the hub, forming the self-energi- SIZE SIZE
G-LOK, clamp-type connector consists of four basic zed seal. Internal pressure reinforces this seal, so the
2 B14 1532 1480 1428 1387 1367
elements: sealing action of the G-LOK is both self-energized B16 1411 1363 1315 1278 1259
and pressure energized. B20 1309 1265 1220 1185 1168
(1) Hub
3 C20 1483 1433 1382 1343 1323
(2) Clamps C23 1354 1308 1262 1226 1208
(3) Seal C25 1216 1175 1133 1101 1084
C27 903 872 842 818 806
(4) Bolting
4 D27 1345 1299 1254 1218 1200
D31 1210 1210 1191 1157 1140
The hubs are usually welded to pipe; the seal is in- D34 950 950 950 934 920
stalled and the bolting is tightened on the clamps to D40 765 739 713 693 683
form a pipe connector that provides superior 6 XF40 1550 1500 1433 1393 1294
strength and leak integrity. The G-LOK is commonly XF46 1150 1101 1033 995 903
used in service with temperatures of up to 650C. XF56 800 755 708 651 620
The G-LOK also excels in high pressure applica- 8 X862 703 703 703 703 703
tions, with working pressure of 30,000 psi not un- X864 616 616 616 616 616
common. X867 554 554 55 554 554
X872 501 501 498 484 477
The G-LOK clamp has been designed for the opti-
mum strenght of a bolted connection. Since the bolts 10 X10H82 666 666 666 666 666
are at right angles to the axis of the pipe, they do X10H84 629 629 629 624 615
X10H87 569 550 531 515 508
not receive direct bending and pressure loads. This X10H94 388 375 362 352 346
system of clamping provides greater strength than X10H97 298 288 278 270 266
ANSI or API flanges at a fraction of the seal size G-LOK in FREE position
12 X12M102 549 549 549 549 549
and weight as a result of this design. Less bolting X12M106 501 501 501 501 498
torque is required for proper seating of the seal. X12M112 434 420 405 393 387
The design of the connector provides considerable X12M120 279 270 260 253 249
stored energy in the system when compared with 14 A-P106 624 624 624 624 624
ANSI or API flanges. This stored energy works to A-P112 548 548 548 548 548
provide leak resistance during thermal cycling and A-P120 484 484 484 484 484
A-P130 414 414 414 414 407
maintains proper bolt loading.
When properly installed, the G-LOK will usually 16 S112 889 889 889 889 889
provide greater bending and torsional strength than S120 785 785 785 785 785
S130 672 672 672 672 672
the connecting pipe. The full face contact of the con- S134 625 625 625 525 625
nector resists bending and ensures rigidity not provi- S137 592 592 592 592 592
ded by other clamp-type connectors. The pressure S140 582 582 582 582 582
S152 453 438 422 410 404
and temperature limitations are determined only by
the materials of construction. 18 U152 462 462 462 462 462
U160 422 422 422 422 422
U170 374 374 374 374 374
HOW THE G-LOK CONNECTORS SEALS 20 3V160 476 476 476 476 476
3V170 401 401 401 401 401
3V180 362 362 362 362 362
The seal ring in the G-LOK resembles a T in cross G-LOK in MADE-UP position 3V192 284 284 284 284 284
section. The base of the T is the rib that is held by
abutting hub faces as the connection is made up. 24 3Y192 623 623 623 623 623
3Y200 607 607 607 607 607
The top of the T forms the lips that seal against the G-LOK clamp connectors are interchangeable with
3Y210 525 525 525 525 525
inner surfaces of the hubs. other connectors designed and manufactured accor- 3Y220 429 429 493 429 429
2 In the assembly of the connection, the clamps fit over ding to the same standard. 19
C M G N
4 4GR25 1341 1296 1250 1214 1197 G-LOK Finite Element Model
4GR27 1114 1077 1039 1009 994
4GR31 959 927 894 868 856
4GR34 630 609 587 570 562
4GR40 361 349 336 327 322
G-LOK CONNECTORS VS ANSI FLANGE G-LOK CONNECTORS VS FLANGES
5 5GR31 1319 1319 1312 1275 1256 G-LOK ANSI FLANGES
5GR34 1037 1037 1037 1037 1037 1500#
5GR40 840 840 840 840 840 The G-LOK clamp connection has a significantly
SIZE ASSEMBLY ASSEMBLY
5GR46 623 623 622 610 601 smaller diameter and a shorter lenght than that of a
5GR52 360 356 244 334 329 WEIGHT KG. WEIGHT KG.
comparably rated ANSI or API ring joint flange con- 2 9 27
6 6GR40 1108 1108 1108 1108 1108 nection, reducing weight and space required for 3 18 50
6GR46 822 822 822 822 822 make-up. 4 24 74
6GR52 663 663 663 663 663 The G-LOK is especially well suited to systems that 6 62 175
6GR62 421 407 392 381 375 8 100 300
require close piping and hookup arrangements. As
10 190 485
8 8GR62 661 661 661 661 661 there are no bolt holes to align, the G-LOK clamp 12 280 730
8GR72 472 472 472 472 472 may be rotated to conveniently locate the bolts for 16 560 1.370
8GR76 415 415 414 403 397 easy make-up and break-down of the connections.
8GR82 299 288 278 270 266 WEIGHTS GIVEN ARE APPROXIMATE
HOW TO SELECT 3) Finally, refer to the pressure-temperature rating HEAVY DUTY SERIES
THE G-LOK CONNECTOR charts, on pages 14 to 19, to ensure that the Clamp material-Low Alloy Steel
G-LOK connector selected meets the design pressu-
re and temperature requirements for the code to PRESSURE RATING (BAR)
1) Determine the following information needed to
correctly size the G-LOK connector: which it is being specified.
NOM. G-LOK
50C 100C 150C 200C 250C 300C 350C
Maximum Service Pressure and Temperature (Your The standard line of G-LOK connectors and
SIZE SIZE
Design Conditions) products are available in materials and sizes 2 B14 737 648 593 546 513 487 481
The engineering or industry code your project has to fit nearly any requirement. But if your requi- B16 679 597 546 503 472 448 443
specified. (ASME VIII, B31.3, etc.) B20 630 554 506 467 438 416 411
rements, pipe size, material or design condi-
Pipe size and schedule or the I.D. and O.D. of the tions, are not covered by one of our charts, 3 C20 713 628 574 528 496 471 466
C23 651 573 524 483 453 430 425
weld end. please contact Galperti Engineering. We have C25 585 514 470 433 407 386 382
Your piping material. an engineering and design staff ready to help C27 434 382 349 322 302 287 284
you solve your most demanding needs. 4 D27 647 569 520 479 450 427 422
2) Refer to the tables in this catalogue: D31 614 541 494 455 428 406 401
D34 496 437 399 368 345 328 324
Locate your pipe size and schedule in the Butt D40 368 324 296 273 256 243 240
weld hub table on pages 6 to 7, then read across 6 XF40 992 960 917 891 828 796 768
to the corresponding hub size (third column). As HOW TO ORDER XF46 736 705 661 637 578 554 511
an example, the 4 schedule 40 Pipe requires a THE G-LOK CONNECTOR XF56 512 483 453 417 397 372 335
G-LOK Hub size of 4GR40. Also note that this 8 X862 483 425 388 358 336 319 315
chart has weights and dimensions for this hub and X864 397 349 319 294 276 262 259
After following the selection procedures the informa-
for most popular hub sizes. X867 330 290 265 244 229 218 215
tion necessary for ordering G-LOK connectors is X872 257 226 207 191 179 170 168
The G-LOK number for the 4GR40 designates the the quantity, the hub number and material, the seal
correct clamp, bolting and seal ring sizes for this number and seal material, and the clamp number 10 X10H82 368 324 296 273 256 243 240
X10H84 331 292 267 246 231 219 216
connection. The first number refers to the pipe and and clamp material. X10H87 274 241 220 203 191 181 179
clamp size, in our example the pipe size is 4 and X10H94 187 164 150 138 130 123 122
the clamp would be the 4. More information on A G-LOK assembly consists of the following: X10H97 143 126 115 106 100 95 94
the clamp can be located in the Clamp table on 12 X12M102 332 293 267 246 231 219 217
Two G-LOK Hubs
page 11. X12M106 269 237 216 199 187 177 176
One G-LOK Clamp Set, with four studs and eight X12M112 209 184 168 155 145 138 136
The final set of numbers is the G-LOK seal for this X12M120 134 118 108 99 93 89 88
nuts (Spherical washer available on request)
connection (in our example this would be a 40).
14 A-P106 468 412 376 347 326 309 305
The G-LOK seal chart is located on page 10. One G-LOK Seal Ring A-P112 411 362 331 305 286 271 268
A-P120 332 292 267 246 231 219 217
A-P130 220 193 177 163 153 145 143
Buttweld Hubs
Designations G-LOK blind hubs are designed to save HEAVY DUTY SERIES
space.
The G-LOK connector designation (exam-
Clamp material-Low Alloy Steel
ple 4 GR 40) designates the correct hub, Available for all standard size G-LOK con-
clamp, bolting and sealring sizes. The first nectors, they can carry the full basic pres- PRESSURE RATING (BAR)
number (4 in the example) refers to the sure rating of the G-LOK connector.
hub and clamp size. The correct clamp can They can also be used as closures for pres-
NOM. G-LOK
sure vessels and heat exchangers, and can 50C 100C 150C 200C 250C 300C 350C
be located in the clamp table on page 11. SIZE SIZE
The second number in the designation be drilled and tapped to incorporate instru-
(40 in the example) refers to the sealring mentation, and customised to fit your speci- 2 B14 935 887 866 840 797 742 734
fic requirements. B16 853 810 790 766 728 677 670
size. The correct sealring can be located in B20 784 744 726 704 669 622 616
the sealring table on page 10.
3 C20 908 862 841 816 775 721 713
STANDARD HUBS C23 822 780 761 738 701 652 645
C25 730 693 676 655 622 579 573
PIPE INSIDE OUTSIDE BW-HUB BL-HUB HUB BACK LIP BW-HUB BL-HUB C27 535 507 495 480 456 424 420
G-LOK O.D. DIAMETER DIAMETER LENGTH LENGTH FACE THICKNESS WEIGHT WEIGHT
NPS SCH.
SIZE 4 D27 823 782 763 740 703 654 647
A B C D D1 E F KG KG D31 779 740 722 700 665 618 612
0,5 40 1GR-A5 21,3 15,8 50,8 44,5 44,50 38,1 7,95 0,30 0,40 D34 606 594 580 562 534 497 491
0,5 80 1GR-A5 21,3 13,9 50,8 44,5 44,50 38,1 7,95 0,30 0,40 D40 456 432 422 409 389 362 358
0,5 160 1GR-A4 21,3 11,8 50,8 44,5 44,50 38,1 7,95 0,30 0,40
0,5 XXS 1GR-A4 21,3 6,4 50,8 44,5 44,50 38,1 7,95 0,30 0,40 6 XF40 1240 1200 1146 1114 1035 995 960
0,75 40 GR-A7 26,7 20,9 50,8 44,5 44,50 38,1 7,95 0,20 0,40 XF46 920 881 826 796 722 693 639
0,75 80 1GR-A7 26,7 18,9 50,8 44,5 44,50 38,1 7,95 0,20 0,40 XF56 640 604 566 521 496 465 419
0,75 160 1GR-A5 26,7 15,6 50,8 44,5 44,50 38,1 7,95 0,30 0,40
0,75 XXS 1GR-A4 26,7 11,0 50,8 44,5 44,50 38,1 7,95 0,30 0,40 8 X862 617 586 572 555 57 490 485
1 40 1GR-A11 33,4 26,6 50,8 44,5 44,50 38,1 7,95 0,20 0,40 X864 505 479 468 453 431 401 396
1 80 1GR-A11 33,4 24,3 50,8 44,5 44,50 38,1 7,95 0,20 0,40 X867 416 395 385 373 355 330 326
1 160 1GR-A7 33,4 20,7 50,8 44,5 44,50 38,1 7,95 0,30 0,40 X872 320 304 296 287 273 254 251
1 XXS 1GR-A5 33,4 15,2 50,8 44,5 44,50 38,1 7,95 0,30 0,40
1 10 mm 1GR-A5 33,4 13,4 50,8 44,5 44,50 38,1 7,95 0,40 0,40 10 X10H82 471 447 436 423 401 373 369
1,5 40 1,5GR14 48,3 40,9 79,4 60,3 54,00 60,3 11,10 0,70 1,30 X10H84 423 401 391 380 361 335 332
1,5 80 1,5GR14 48,3 38,1 79,4 60,3 54,00 60,3 11,10 0,80 1,30 X10H87 46 328 320 311 295 274 272
1,5 160 1,5GR14 48,3 34,0 79,4 60,3 54,00 60,3 11,10, 0,80 1,30
X10H94 233 221 215 209 198 185 183
1,5 XXS 1,5GR-A11 48,3 27,9 79,4 60,3 54,00 60,3 12,70 1,10 1,40
X10H97 176 167 163 158 150 140 138
1,5 14,2 mm 1,5GR-A11 48,3 19,9 79,4 60,3 54,00 60,3 12,70 1,10 1,40
12 X12M102 427 405 395 383 364 339 335
2 40 2GR-A20 60,3 52,5 92,1 69,9 50,80 73,0 11,10 1,00 1,60
X12M106 342 325 317 308 292 272 269
2 80 2GR-A20 60,3 49,2 92,1 69,9 50,80 73,0 11,10 1,10 1,60
X12M112 264 250 244 237 225 209 207
2 160 2GR-A20 60,3 42,9 92,1 69,9 50,80 73,0 11,10 1,20 1,60
X12M120 166 158 154 150 142 132 131
2 160 2GR-A16 60,3 42,9 92,1 69,9 50,80 73,0 11,10 1,30 1,70
2 XXS 2GR-A20 60,3 38,1 92,1 69,9 50,80 73,0 11,10 1,20 1,60 14 A-P106 595 577 563 546 518 482 477
2 XXS 2GR-A16 60,3 38,1 92,1 69,9 50,80 73,0 11,10 1,40 1,70 A-P112 532 505 493 478 454 423 418
2 XXS 2GR14 60,3 38,1 92,1 69,9 50,80 73,0 11,10 1,50 1,80 A-P120 427 406 396 384 365 339 336
2 12,5 mm 2GR14 60,3 35,3 92,1 69,9 50,80 73,0 11,10 1,60 1,80 A-P130 280 265 259 251 239 222 220
2 14,2 mm 2GR14 60,3 31,9 92,1 69,9 50,80 73,0 11,10 1,60 1,80
2 17,5 mm 2GR-A11 60,3 25,3 92,1 69,9 44,50 73,0 12,70 1,90 1,70 16 S112 763 724 707 685 651 605 599
2,5 XXS 2,5-3GR-A20 73,0 45,0 127,0 82,6 63,50 101,6 12,70 3,50 4,30 S120 689 654 638 619 588 547 541
2,5 20 mm 2,5-3GR-14 73,0 33,0 127,0 82,6 54,00 101,6 11,10 4,00 3,80 S130 551 523 510 495 470 437 433
3 40 3GR27 88,9 77,9 127,0 82,6 63,50 101,6 12,70 2,10 4,00 S134 488 464 452 439 417 388 383
3 80 3GR27 88,9 73,7 127,0 82,6 63,50 101,6 12,70 2,30 4,00 S137 443 421 411 398 378 352 348
3 160 3GR-A25 88,9 66,7 127,0 82,6 63,50 101,6 12,70 2,90 4,10 S140 429 407 397 385 366 340 337
3 XXS 3GR-A25 88,9 58,5 127,0 82,6 63,50 101,6 12,70 3,20 4,10 S152 278 264 257 250 237 221 218
3 XXS 3GR23 88,9 58,5 127,0 82,6 63,50 101,6 12,70 3,40 4,20
3 XXS 3GR-A20 88,9 58,5 127,0 82,6 63,50 101,6 12,70 3,50 4,30 18 U152 390 371 354 335 311 296 289
3 16 mm 3GR23 88,9 56,9 127,0 82,6 63,50 101,6 12,70 3,50 4,20 U160 355 340 323 306 291 276 268
3 17,5 mm 3GR23 88,9 53,9 127,0 82,6 63,50 101,6 12,70 3,60 4,20 U170 316 299 287 273 258 244 236
3 25 mm 3GR14 88,9 38,9 127,0 82,6 54,00 101,6 12,70 4,50 3,90
4 40 4GR40 114,3 102,3 152,4 92,1 54,00 127,0 12,70 2,80 4,70 20 3V160 385 363 345 331 312 296 289
4 80 4GR40 114,3 97,2 152,4 92,1 54,00 127,0 12,70 3,20 4,70 3V170 337 324 310 293 276 261 254
4 80 4GR34 114,3 97,2 152,4 92,1 73,00 127,0 12,70 3,70 7,10 3V180 316 300 292 284 269 250 248
4 120 4GR34 114,3 92,1 152,4 92,1 73,00 127,0 12,70 4,10 7,10 3V192 241 227 220 214 200 184 179
4 160 4GR34 114,3 87,3 152,4 92,1 73,00 127,0 12,70 4,40 7,10
4 XXS 4GR34 114,3 80,1 152,4 92,1 73,00 127,0 12,70 4,70 7,10 24 3Y192 534 525 510 493 478 433 416
4 XXS 4GR31 114,3 80,1 152,4 92,1 73,00 127,0 12,70 5,20 7,30 3Y200 516 518 503 482 452 418 402
4 XXS 4GR27 114,3 80,1 152,4 92,1 73,00 127,0 12,70 5,40 7,40 3Y210 453 427 416 403 379 347 341
4 7,5 mm 4GR31 114,3 79,3 152,4 92,1 73,00 127,0 12,70 5,30 7,30 3Y220 365 342 335 324 307 282 276
6 4 20 mm 4GR27 114,3 74,3 152,4 92,1 73,00 127,0 12,70 5,70 7,40 15
C M G N
Buttweld Hubs
Pressure Temperature Rating Carbon Steel
Blind Hubs
Heavy Duty Buttweld Hubs
Other Configurations
Heavy Duty Blind Hubs
Heavy Duty Buttweld Hubs
Other Configurations
Heavy Duty Blind Hubs
products, there are many other configurations in the 14 25 mm A-P120 355,6 305,6 469,9 184,2 152,40 419,1 31,75 80,00 161,00
14 34,9 mm A-P112 355,6 285,8 469,9 184,2 152,40 419,1 28,57 92,00 162,00
G-LOK range, some of wich are illustrated below. 14 34,9 mm A-P120 355,6 285,8 469,9 184,2 152,40 419,1 31,75 87,00 161,00
14 36 mm A-P112 355,6 283,6 469,9 184,2 152,40 419,1 28,57 93,00 162,00
316 stainless steel, inconel 625, hastelloy C276 weld 14 38 mm A-P112 355,6 279,6 469,9 184,2 152,40 419,1 28,57 95,00 162,00
overlaid hub are also available for corrosive service. 14 40 mm A-P112 355,6 275,6 469,9 184,2 152,40 419,1 28,57 96,00 162,00
14 45 mm A-P102 355,6 265,6 469,9 184,2 146,00 419,1 31,75 107,00 158,00
14 55 mm A-P97 355,6 245,6 469,9 184,2 146,00 419,1 31,75 117,00 158,00
14 60 mm A-P94 355,6 235,6 469,9 184,2 146,00 419,1 31,75 122,00 159,00
16 60 S152 406,4 373,0 533,4 200,0 162,00 482,6 42,88 99,00 225,00
16 100 S140 406,4 354,0 533,4 200,0 162,00 482,6 42,88 121,00 228,00
16 120 S140 406,4 344,6 533,4 200,0 162,00 482,6 42,88 126,00 228,00
16 120 S137 406,4 344,6 533,4 200,0 162,00 482,6 41,28 127,00 228,00
16 140 S140 406,4 333,4 533,4 200,0 162,00 482,6 42,88 129,00 228,00
Weld Overlaid Hub 16 140 S137 406,4 333,4 533,4 200,0 162,00 482,6 41,28 131,00 228,00
16 160 S130 406,4 325,4 533,4 200,0 178,00 482,6 42,88 144,00 254,00
16 28 mm S140 406,4 350,4 533,4 200,0 162,00 482,6 42,88 123,00 228,00
16 34,9 mm S-A134 406,4 336,6 533,4 200,0 178,00 482,6 42,88 135,00 253,00
16 40 mm S130 406,4 326,4 533,4 200,0 178,00 482,6 42,88 144,00 254,00
16 45 mm S130 406,4 316,4 533,4 200,0 178,00 482,6 42,88 148,00 254,00
16 50 mm S120 406,4 306,4 533,4 200,0 190,00 482,6 44,47 162,00 274,00
16 55 mm S120 406,4 296,4 533,4 200,0 190,00 482,6 44,47 166,00 274,00
16 65 mm S112 406,4 276,4 533,4 200,0 190,00 482,6 41,28 179,00 275,00
18 60 U170 457,2 419,2 635,0 200,0 181,00 584,2 41,28 176,00 366,00
18 100 U160 457,2 398,4 635,0 222,2 184,00 584,2 41,28 203,00 380,00
18 120 U152 457,2 387,4 635,0 222,2 184,00 584,2 41,28 218,00 382,00
18 160 U152 457,2 366,8 635,0 222,2 184,00 584,2 41,28 230,00 382,00
18 160 U144 457,2 366,8 635,0 222,2 184,00 584,2 41,28 239,00 384,00
18 32 mm U152 457,2 393,2 635,0 222,2 184,00 584,2 41,28 213,00 382,00
18 34,9 mm U152 457,2 387,4 635,0 222,2 184,00 584,2 41,28 218,00 382,00
18 44 mm U152 457,2 369,2 635,0 222,2 184,00 584,2 41,28 229,00 382,00
18 45 mm U152 457,2 367,2 635,0 222,2 184,00 584,2 41,28 230,00 382,00
18 50 mm U152 457,2 357,2 635,0 222,2 184,00 584,2 41,28 232,00 382,00
18 55 mm U140 457,2 347,2 635,0 222,2 184,00 584,2 41,28 256,00 385,00
Transition Hubs Threaded Hubs Socket Weld Hubs 18 60 mm U-A134 457,2 337,2 635,0 222,2 184,00 584,2 41,28 266,00 387,00
20 40 3V210 508,0 477,8 660,4 228,6 133,40 609,6 31,75 93,00 265,00
20 60 3V192 508,0 466,8 660,4 228,6 159,00 609,6 31,75 156,00 337,00
20 100 3V180 508,0 443,0 660,4 228,6 181,00 609,6 31,75 193,00 393,00
20 120 3V170 508,0 431,8 660,4 228,6 187,00 609,6 31,75 215,00 411,00
20 160 3V170 508,0 408,0 660,4 228,6 187,00 609,6 31,75 229,00 411,00
20 34,9 mm 3V180 508,0 438,2 660,4 228,6 181,00 609,6 31,75 196,00 393,00
20 55 mm 3V160 508,0 398,0 660,4 228,6 178,00 609,6 31,75 252,00 397,00
20 60 mm 3V152 508,0 388,0 660,4 228,6 178,00 609,6 31,75 266,00 399,00
20 65 mm 3V152 508,0 378,0 660,4 228,6 178,00 609,6 31,75 273,00 399,00
24 40 3Y244 609,6 574,8 793,8 254,0 181,00 743,0 41,28 242,00 564,00
24 60 3Y220 609,6 560,4 793,8 254,0 245,00 743,0 41,28 325,00 796,00
24 100 3Y210 609,6 531,8 793,8 254,0 203,00 743,0 41,28 373,00 658,00
24 120 3Y210 609,6 517,6 793,8 254,0 203,00 743,0 41,28 387,00 658,00
24 160 3Y200 609,6 490,6 793,8 254,0 203,00 743,0 41,28 430,00 669,00
24 65 mm 3Y192 609,6 479,6 793,8 254,0 203,00 743,0 41,28 453,00 672,00
24 70 mm 3Y180 609,6 469,6 793,8 254,0 203,00 743,0 41,28 457,00 677,00
24 75 mm 3Y180 609,6 459,6 793,8 254,0 203,00 743,0 41,28 488,00 677,00
12 Shroud Hubs Adapter Hubs Pressure - Tapped Hubs 9
C M G N
G-LOK sealrings are available in those specified in the table can be G-LOK clamps are manufactured in low
the following standard materials: available to meet specific service alloy steel or stainless steel.
AISI 4140, A564 GR 630 (17- conditions.
4PH) and Alloy 718. For applications greater than 400 Other material grades and additional si-
They can also be supplied in other C, consult Galperti Engineering for zes can be supplied on request. Low alloy
materials on request. They are advice on materials and coatings. steel clamps are coated with a green indu-
coated with either PTFE or MOS2 to All G-LOK sealrings meet the strial paint system for standard supply.
provide lubrication during make- hardness requirements of NACE MR-
up. 01-75. Clamps are supplied complete with stud
Sealrings manufactured of mate- For easy of identification G-LOK bolting in either A193 B7, A320 L7, or
rials or with coatings other than sealrings are coloured. A193 B8 grades. Bolting is supplied with hot
deep galvanized as standard, UNC/8UN th-
SEAL RINGS read series, and spherically faced heavy hex
nuts. Other coating and bolt supply options
SIZE A C D E F WEIGHT KG are available on request. Spherical washer
A4 12,79 25,40 9,53 3,17 3,18 0,01
are also available on request.
A5 15,96 27,80 9,53 3,17 3,18 0,01 Refer to page 5 for bolting and assembly
A7 23,08 34,90 9,53 3,17 3,18 0,02 procedures.
8 25,55 40,80 9,53 3,17 3,18 0,03
A11 28,73 44,00 9,53 3,17 3,18 0,03
13 38,10 60,30 9,62 3,17 3,22 0,05
14 40,90 66,70 14,29 6,35 3,97 0,13 STANDARD CLAMPS
A16 47,71 68,30 15,87 6,35 4,76 0,12
A20 53,24 82,50 19,05 6,35 6,35 0,20 CL A B C D E F G H I J K WEIGHT
23 61,21 88,90 19,05 6,35 6,35 0,20
A25 69,15 101,60 19,05 6,35 6,35 0,30 1 42,9 81,0 71,4 108,0 34,9 25,4 67,0 1/2 88,90 58,7 31,8 1,70
27 78,71 108,00 19,05 6,35 6,35 0,30 1,5 68,3 127,0 114,3 165,1 50,8 36,5 97,0 5/8 127,0 79,4 41,3 4,60
31 83,50 114,30 19,05 6,35 6,35 0,30 2 81,0 146,0 128,6 190,0 50,8 41,2 111,0 3/4 133,4 90,1 46,0 6,40
34 94,66 127,00 19,05 6,35 6,35 0,40
40 104,32 139,70 25,40 6,34 9,53 0,50 3 111,1 190,5 174,6 234,0 60,3 52,3 136,0 3/4 152,4 88,9 46,0 10,00
A42 107,50 168,30 25,40 6,34 9,53 0,90 4 136,5 215,9 206,4 266,7 60,3 61,9 156,0 7/8 177,8 104,8 52,4 14,00
46 121,85 157,20 25,40 6,34 9,53 0,60 5 174,6 260,3 247,6 314,3 76,2 73,0 184,0 1 203,2 112,7 58,7 22,00
52 136,14 168,30 25,40 6,34 9,53 0,60
6 212,8 320,7 304,8 381,0 88,9 76,3 217,0 1-1/8 238,1 122,2 61,9 34,00
54 140,20 173,10 25,40 6,34 9,53 0,71
56 147,25 190,50 25,40 6,34 9,53 0,80 8 269,9 387,4 368,3 463,6 90,4 85,9 256,0 1-1/4 266,7 149,2 73,2 51,00
62 156,50 200,00 34,93 9,53 12,70 1,50 10H 311,2 463,6 453,6 558,8 143,0 117,6 316,0 1-5/8 358,8 187,5 92,2 105,00
A64 167,60 222,40 34,93 9,53 12,70 1,90 12M 371,5 558,8 527,3 654,1 149,4 117,6 364,0 1-3/4 406,4 190,5 95,3 140,00
67 177,14 222,30 34,93 9,53 12,70 1,70
72 186,70 241,30 34,93 9,53 12,70 2,00
76 199,70 254,00 34,93 9,53 12,70 2,20
82 212,10 257,20 34,93 9,53 12,70 2,00
84 218,40 282,60 34,93 9,53 12,70 2,70 HEAVY DUTY CLAMPS
87 227,90 282,60 34,93 9,53 12,70 2,40
94 243,80 304,80 34,93 9,53 12,70 2,80 CL A B C D E F G H I J K WEIGHT
97 253,30 304,80 34,93 9,53 12,70 2,60
102 262,90 304,80 34,93 9,53 12,70 2,30 B 104,8 184,2 174,6 228,6 73,0 58,7 141,0 7/8 171,5 99,9 50,8 13,00
106 275,60 323,90 34,93 9,53 12,70 2,70 C 123,8 203,2 196,8 254,0 76,2 61,9 151,0 7/8 177,8 103,2 52,4 16,00
112 288,30 358,80 41,28 15,88 12,70 5,50 D 155,6 242,9 228,6 295,8 76,2 68,3 175,0 1 203,2 112,7 58,7 20,00
116 298,45 358,80 34,93 9,53 12,70 3,26
E 174,6 260,4 247,6 314,3 76,2 73,0 184,0 1 203,2 112,7 58,7 22,00
120 308,30 352,40 34,93 9,53 12,70 2,70
122 314,70 358,80 34,93 9,53 12,70 2,70 F 212,8 320,7 304,8 381,0 88,9 76,3 217,0 1-1/8 238,1 122,2 61,9 34,00
130 332,20 381,00 38,10 12,70 12,70 3,90 XF 212,7 343,0 327,0 406,0 102,0 83,0 234,0 1-1/4 279,4 130,0 70,0 48,00
A134 344,90 393,70 38,10 12,70 12,70 4,10 ZX 246,0 410,0 388,0 485,0 125,0 105,0 273,0 1-1/4 217,5 150,0 75,0 90,00
137 354,40 419,10 41,28 15,88 12,70 6,20
G 257,2 406,4 375,0 477,0 116,0 89,0 271,0 1-3/8 279,4 152,4 79,4 60,00
140 357,60 419,10 38,10 12,70 12,70 5,00
144 370,30 431,80 38,10 12,70 12,70 5,20 XG 257,2 406,4 381,0 508,0 127,0 114,3 284,0 1-3/8 330,2 152,4 79,4 71,00
152 389,30 450,90 38,10 12,70 12,70 5,50 X8 269,7 412,8 384,0 482,6 104,6 85,9 271,0 1-3/8 279,4 152,4 82,6 59,00
160 408,40 469,90 38,10 12,70 12,70 5,70 X10H 311,2 495,3 463,6 590,6 165,1 119,0 338,0 1-3/4 406,7 190,5 95,3 145,00
170 433,50 495,30 44,50 12,70 15,90 6,70
X12M 371,5 590,6 546,1 692,2 184,0 131,7 398,0 2 469,9 216,0 114,3 225,00
180 459,10 520,70 44,50 12,70 15,90 7,10
192 490,70 558,80 44,50 12,70 15,90 8,10 A-P 435,0 635,0 584,2 736,6 154,0 114,3 403,0 2 419,1 209,5 108,0 175,00
200 509,70 577,90 44,50 12,70 15,90 8,40 5P 435,0 711,2 650,9 838,2 203,2 142,9 465,0 2-1/2 508,0 266,7 139,7 360,00
210 535,30 609,60 50,80 12,70 19,05 10,20 S 500,1 765,2 698,5 892,2 228,6 149,2 500,0 2-1/2 558,8 266,7 139,7 440,00
213 544,80 619,10 50,80 12,70 19,05 10,40
U 601,6 860,4 793,8 990,6 222,3 165,1 541,0 2-1/2 558,8 279,4 139,7 450,00
220 561,10 635,00 50,80 12,70 19,05 10,50
232 592,90 666,80 50,80 12,70 19,05 11,10 V 627,0 762,0 804,9 870,0 165,1 233,4 535,0 2-1/4 685,8 235,0 127,0 330,00
244 625,10 704,90 50,80 12,70 19,05 12,20 3V 627,0 889,0 836,6 997,0 203,2 152,4 563,0 2-1/4 609,6 235,0 127,0 440,00
260 663,60 749,30 50,80 12,70 19,05 13,50 5V 627,0 952,4 887,4 1079,5 247,7 177,8 593,0 2-1/2 609,60 279,4 139,7 720,00
264 676,30 762,00 50,80 12,70 19,05 13,70
Y 760,4 984,3 952,50 1111,3 228,6 220,7 642,0 2-3/4 730,3 279,4 152,4 570,00
280 714,90 797,00 50,80 12,70 19,05 13,90
292 746,60 819,20 50,80 12,70 19,05 13,20 3Y 760,4 1137,6 1079,5 1299,2 322,3 222,3 711,0 2-1/4 762,0 362,0 190,5 1230,00
10 11
C M G N
G-LOK sealrings are available in those specified in the table can be G-LOK clamps are manufactured in low
the following standard materials: available to meet specific service alloy steel or stainless steel.
AISI 4140, A564 GR 630 (17- conditions.
4PH) and Alloy 718. For applications greater than 400 Other material grades and additional si-
They can also be supplied in other C, consult Galperti Engineering for zes can be supplied on request. Low alloy
materials on request. They are advice on materials and coatings. steel clamps are coated with a green indu-
coated with either PTFE or MOS2 to All G-LOK sealrings meet the strial paint system for standard supply.
provide lubrication during make- hardness requirements of NACE MR-
up. 01-75. Clamps are supplied complete with stud
Sealrings manufactured of mate- For easy of identification G-LOK bolting in either A193 B7, A320 L7, or
rials or with coatings other than sealrings are coloured. A193 B8 grades. Bolting is supplied with hot
deep galvanized as standard, UNC/8UN th-
SEAL RINGS read series, and spherically faced heavy hex
nuts. Other coating and bolt supply options
SIZE A C D E F WEIGHT KG are available on request. Spherical washer
A4 12,79 25,40 9,53 3,17 3,18 0,01
are also available on request.
A5 15,96 27,80 9,53 3,17 3,18 0,01 Refer to page 5 for bolting and assembly
A7 23,08 34,90 9,53 3,17 3,18 0,02 procedures.
8 25,55 40,80 9,53 3,17 3,18 0,03
A11 28,73 44,00 9,53 3,17 3,18 0,03
13 38,10 60,30 9,62 3,17 3,22 0,05
14 40,90 66,70 14,29 6,35 3,97 0,13 STANDARD CLAMPS
A16 47,71 68,30 15,87 6,35 4,76 0,12
A20 53,24 82,50 19,05 6,35 6,35 0,20 CL A B C D E F G H I J K WEIGHT
23 61,21 88,90 19,05 6,35 6,35 0,20
A25 69,15 101,60 19,05 6,35 6,35 0,30 1 42,9 81,0 71,4 108,0 34,9 25,4 67,0 1/2 88,90 58,7 31,8 1,70
27 78,71 108,00 19,05 6,35 6,35 0,30 1,5 68,3 127,0 114,3 165,1 50,8 36,5 97,0 5/8 127,0 79,4 41,3 4,60
31 83,50 114,30 19,05 6,35 6,35 0,30 2 81,0 146,0 128,6 190,0 50,8 41,2 111,0 3/4 133,4 90,1 46,0 6,40
34 94,66 127,00 19,05 6,35 6,35 0,40
40 104,32 139,70 25,40 6,34 9,53 0,50 3 111,1 190,5 174,6 234,0 60,3 52,3 136,0 3/4 152,4 88,9 46,0 10,00
A42 107,50 168,30 25,40 6,34 9,53 0,90 4 136,5 215,9 206,4 266,7 60,3 61,9 156,0 7/8 177,8 104,8 52,4 14,00
46 121,85 157,20 25,40 6,34 9,53 0,60 5 174,6 260,3 247,6 314,3 76,2 73,0 184,0 1 203,2 112,7 58,7 22,00
52 136,14 168,30 25,40 6,34 9,53 0,60
6 212,8 320,7 304,8 381,0 88,9 76,3 217,0 1-1/8 238,1 122,2 61,9 34,00
54 140,20 173,10 25,40 6,34 9,53 0,71
56 147,25 190,50 25,40 6,34 9,53 0,80 8 269,9 387,4 368,3 463,6 90,4 85,9 256,0 1-1/4 266,7 149,2 73,2 51,00
62 156,50 200,00 34,93 9,53 12,70 1,50 10H 311,2 463,6 453,6 558,8 143,0 117,6 316,0 1-5/8 358,8 187,5 92,2 105,00
A64 167,60 222,40 34,93 9,53 12,70 1,90 12M 371,5 558,8 527,3 654,1 149,4 117,6 364,0 1-3/4 406,4 190,5 95,3 140,00
67 177,14 222,30 34,93 9,53 12,70 1,70
72 186,70 241,30 34,93 9,53 12,70 2,00
76 199,70 254,00 34,93 9,53 12,70 2,20
82 212,10 257,20 34,93 9,53 12,70 2,00
84 218,40 282,60 34,93 9,53 12,70 2,70 HEAVY DUTY CLAMPS
87 227,90 282,60 34,93 9,53 12,70 2,40
94 243,80 304,80 34,93 9,53 12,70 2,80 CL A B C D E F G H I J K WEIGHT
97 253,30 304,80 34,93 9,53 12,70 2,60
102 262,90 304,80 34,93 9,53 12,70 2,30 B 104,8 184,2 174,6 228,6 73,0 58,7 141,0 7/8 171,5 99,9 50,8 13,00
106 275,60 323,90 34,93 9,53 12,70 2,70 C 123,8 203,2 196,8 254,0 76,2 61,9 151,0 7/8 177,8 103,2 52,4 16,00
112 288,30 358,80 41,28 15,88 12,70 5,50 D 155,6 242,9 228,6 295,8 76,2 68,3 175,0 1 203,2 112,7 58,7 20,00
116 298,45 358,80 34,93 9,53 12,70 3,26
E 174,6 260,4 247,6 314,3 76,2 73,0 184,0 1 203,2 112,7 58,7 22,00
120 308,30 352,40 34,93 9,53 12,70 2,70
122 314,70 358,80 34,93 9,53 12,70 2,70 F 212,8 320,7 304,8 381,0 88,9 76,3 217,0 1-1/8 238,1 122,2 61,9 34,00
130 332,20 381,00 38,10 12,70 12,70 3,90 XF 212,7 343,0 327,0 406,0 102,0 83,0 234,0 1-1/4 279,4 130,0 70,0 48,00
A134 344,90 393,70 38,10 12,70 12,70 4,10 ZX 246,0 410,0 388,0 485,0 125,0 105,0 273,0 1-1/4 217,5 150,0 75,0 90,00
137 354,40 419,10 41,28 15,88 12,70 6,20
G 257,2 406,4 375,0 477,0 116,0 89,0 271,0 1-3/8 279,4 152,4 79,4 60,00
140 357,60 419,10 38,10 12,70 12,70 5,00
144 370,30 431,80 38,10 12,70 12,70 5,20 XG 257,2 406,4 381,0 508,0 127,0 114,3 284,0 1-3/8 330,2 152,4 79,4 71,00
152 389,30 450,90 38,10 12,70 12,70 5,50 X8 269,7 412,8 384,0 482,6 104,6 85,9 271,0 1-3/8 279,4 152,4 82,6 59,00
160 408,40 469,90 38,10 12,70 12,70 5,70 X10H 311,2 495,3 463,6 590,6 165,1 119,0 338,0 1-3/4 406,7 190,5 95,3 145,00
170 433,50 495,30 44,50 12,70 15,90 6,70
X12M 371,5 590,6 546,1 692,2 184,0 131,7 398,0 2 469,9 216,0 114,3 225,00
180 459,10 520,70 44,50 12,70 15,90 7,10
192 490,70 558,80 44,50 12,70 15,90 8,10 A-P 435,0 635,0 584,2 736,6 154,0 114,3 403,0 2 419,1 209,5 108,0 175,00
200 509,70 577,90 44,50 12,70 15,90 8,40 5P 435,0 711,2 650,9 838,2 203,2 142,9 465,0 2-1/2 508,0 266,7 139,7 360,00
210 535,30 609,60 50,80 12,70 19,05 10,20 S 500,1 765,2 698,5 892,2 228,6 149,2 500,0 2-1/2 558,8 266,7 139,7 440,00
213 544,80 619,10 50,80 12,70 19,05 10,40
U 601,6 860,4 793,8 990,6 222,3 165,1 541,0 2-1/2 558,8 279,4 139,7 450,00
220 561,10 635,00 50,80 12,70 19,05 10,50
232 592,90 666,80 50,80 12,70 19,05 11,10 V 627,0 762,0 804,9 870,0 165,1 233,4 535,0 2-1/4 685,8 235,0 127,0 330,00
244 625,10 704,90 50,80 12,70 19,05 12,20 3V 627,0 889,0 836,6 997,0 203,2 152,4 563,0 2-1/4 609,6 235,0 127,0 440,00
260 663,60 749,30 50,80 12,70 19,05 13,50 5V 627,0 952,4 887,4 1079,5 247,7 177,8 593,0 2-1/2 609,60 279,4 139,7 720,00
264 676,30 762,00 50,80 12,70 19,05 13,70
Y 760,4 984,3 952,50 1111,3 228,6 220,7 642,0 2-3/4 730,3 279,4 152,4 570,00
280 714,90 797,00 50,80 12,70 19,05 13,90
292 746,60 819,20 50,80 12,70 19,05 13,20 3Y 760,4 1137,6 1079,5 1299,2 322,3 222,3 711,0 2-1/4 762,0 362,0 190,5 1230,00
10 11
C M G N
Heavy Duty Buttweld Hubs
Other Configurations
Heavy Duty Blind Hubs
products, there are many other configurations in the 14 25 mm A-P120 355,6 305,6 469,9 184,2 152,40 419,1 31,75 80,00 161,00
14 34,9 mm A-P112 355,6 285,8 469,9 184,2 152,40 419,1 28,57 92,00 162,00
G-LOK range, some of wich are illustrated below. 14 34,9 mm A-P120 355,6 285,8 469,9 184,2 152,40 419,1 31,75 87,00 161,00
14 36 mm A-P112 355,6 283,6 469,9 184,2 152,40 419,1 28,57 93,00 162,00
316 stainless steel, inconel 625, hastelloy C276 weld 14 38 mm A-P112 355,6 279,6 469,9 184,2 152,40 419,1 28,57 95,00 162,00
overlaid hub are also available for corrosive service. 14 40 mm A-P112 355,6 275,6 469,9 184,2 152,40 419,1 28,57 96,00 162,00
14 45 mm A-P102 355,6 265,6 469,9 184,2 146,00 419,1 31,75 107,00 158,00
14 55 mm A-P97 355,6 245,6 469,9 184,2 146,00 419,1 31,75 117,00 158,00
14 60 mm A-P94 355,6 235,6 469,9 184,2 146,00 419,1 31,75 122,00 159,00
16 60 S152 406,4 373,0 533,4 200,0 162,00 482,6 42,88 99,00 225,00
16 100 S140 406,4 354,0 533,4 200,0 162,00 482,6 42,88 121,00 228,00
16 120 S140 406,4 344,6 533,4 200,0 162,00 482,6 42,88 126,00 228,00
16 120 S137 406,4 344,6 533,4 200,0 162,00 482,6 41,28 127,00 228,00
16 140 S140 406,4 333,4 533,4 200,0 162,00 482,6 42,88 129,00 228,00
Weld Overlaid Hub 16 140 S137 406,4 333,4 533,4 200,0 162,00 482,6 41,28 131,00 228,00
16 160 S130 406,4 325,4 533,4 200,0 178,00 482,6 42,88 144,00 254,00
16 28 mm S140 406,4 350,4 533,4 200,0 162,00 482,6 42,88 123,00 228,00
16 34,9 mm S-A134 406,4 336,6 533,4 200,0 178,00 482,6 42,88 135,00 253,00
16 40 mm S130 406,4 326,4 533,4 200,0 178,00 482,6 42,88 144,00 254,00
16 45 mm S130 406,4 316,4 533,4 200,0 178,00 482,6 42,88 148,00 254,00
16 50 mm S120 406,4 306,4 533,4 200,0 190,00 482,6 44,47 162,00 274,00
16 55 mm S120 406,4 296,4 533,4 200,0 190,00 482,6 44,47 166,00 274,00
16 65 mm S112 406,4 276,4 533,4 200,0 190,00 482,6 41,28 179,00 275,00
18 60 U170 457,2 419,2 635,0 200,0 181,00 584,2 41,28 176,00 366,00
18 100 U160 457,2 398,4 635,0 222,2 184,00 584,2 41,28 203,00 380,00
18 120 U152 457,2 387,4 635,0 222,2 184,00 584,2 41,28 218,00 382,00
18 160 U152 457,2 366,8 635,0 222,2 184,00 584,2 41,28 230,00 382,00
18 160 U144 457,2 366,8 635,0 222,2 184,00 584,2 41,28 239,00 384,00
18 32 mm U152 457,2 393,2 635,0 222,2 184,00 584,2 41,28 213,00 382,00
18 34,9 mm U152 457,2 387,4 635,0 222,2 184,00 584,2 41,28 218,00 382,00
18 44 mm U152 457,2 369,2 635,0 222,2 184,00 584,2 41,28 229,00 382,00
18 45 mm U152 457,2 367,2 635,0 222,2 184,00 584,2 41,28 230,00 382,00
18 50 mm U152 457,2 357,2 635,0 222,2 184,00 584,2 41,28 232,00 382,00
18 55 mm U140 457,2 347,2 635,0 222,2 184,00 584,2 41,28 256,00 385,00
Transition Hubs Threaded Hubs Socket Weld Hubs 18 60 mm U-A134 457,2 337,2 635,0 222,2 184,00 584,2 41,28 266,00 387,00
20 40 3V210 508,0 477,8 660,4 228,6 133,40 609,6 31,75 93,00 265,00
20 60 3V192 508,0 466,8 660,4 228,6 159,00 609,6 31,75 156,00 337,00
20 100 3V180 508,0 443,0 660,4 228,6 181,00 609,6 31,75 193,00 393,00
20 120 3V170 508,0 431,8 660,4 228,6 187,00 609,6 31,75 215,00 411,00
20 160 3V170 508,0 408,0 660,4 228,6 187,00 609,6 31,75 229,00 411,00
20 34,9 mm 3V180 508,0 438,2 660,4 228,6 181,00 609,6 31,75 196,00 393,00
20 55 mm 3V160 508,0 398,0 660,4 228,6 178,00 609,6 31,75 252,00 397,00
20 60 mm 3V152 508,0 388,0 660,4 228,6 178,00 609,6 31,75 266,00 399,00
20 65 mm 3V152 508,0 378,0 660,4 228,6 178,00 609,6 31,75 273,00 399,00
24 40 3Y244 609,6 574,8 793,8 254,0 181,00 743,0 41,28 242,00 564,00
24 60 3Y220 609,6 560,4 793,8 254,0 245,00 743,0 41,28 325,00 796,00
24 100 3Y210 609,6 531,8 793,8 254,0 203,00 743,0 41,28 373,00 658,00
24 120 3Y210 609,6 517,6 793,8 254,0 203,00 743,0 41,28 387,00 658,00
24 160 3Y200 609,6 490,6 793,8 254,0 203,00 743,0 41,28 430,00 669,00
24 65 mm 3Y192 609,6 479,6 793,8 254,0 203,00 743,0 41,28 453,00 672,00
24 70 mm 3Y180 609,6 469,6 793,8 254,0 203,00 743,0 41,28 457,00 677,00
24 75 mm 3Y180 609,6 459,6 793,8 254,0 203,00 743,0 41,28 488,00 677,00
12 Shroud Hubs Adapter Hubs Pressure - Tapped Hubs 9
C M G N
Heavy Duty Buttweld Hubs
Other Configurations
Heavy Duty Blind Hubs
Buttweld Hubs
Pressure Temperature Rating Carbon Steel
Blind Hubs
Buttweld Hubs
Designations G-LOK blind hubs are designed to save HEAVY DUTY SERIES
space.
The G-LOK connector designation (exam-
Clamp material-Low Alloy Steel
ple 4 GR 40) designates the correct hub, Available for all standard size G-LOK con-
clamp, bolting and sealring sizes. The first nectors, they can carry the full basic pres- PRESSURE RATING (BAR)
number (4 in the example) refers to the sure rating of the G-LOK connector.
hub and clamp size. The correct clamp can They can also be used as closures for pres-
NOM. G-LOK
sure vessels and heat exchangers, and can 50C 100C 150C 200C 250C 300C 350C
be located in the clamp table on page 11. SIZE SIZE
The second number in the designation be drilled and tapped to incorporate instru-
(40 in the example) refers to the sealring mentation, and customised to fit your speci- 2 B14 935 887 866 840 797 742 734
fic requirements. B16 853 810 790 766 728 677 670
size. The correct sealring can be located in B20 784 744 726 704 669 622 616
the sealring table on page 10.
3 C20 908 862 841 816 775 721 713
STANDARD HUBS C23 822 780 761 738 701 652 645
C25 730 693 676 655 622 579 573
PIPE INSIDE OUTSIDE BW-HUB BL-HUB HUB BACK LIP BW-HUB BL-HUB C27 535 507 495 480 456 424 420
G-LOK O.D. DIAMETER DIAMETER LENGTH LENGTH FACE THICKNESS WEIGHT WEIGHT
NPS SCH.
SIZE 4 D27 823 782 763 740 703 654 647
A B C D D1 E F KG KG D31 779 740 722 700 665 618 612
0,5 40 1GR-A5 21,3 15,8 50,8 44,5 44,50 38,1 7,95 0,30 0,40 D34 606 594 580 562 534 497 491
0,5 80 1GR-A5 21,3 13,9 50,8 44,5 44,50 38,1 7,95 0,30 0,40 D40 456 432 422 409 389 362 358
0,5 160 1GR-A4 21,3 11,8 50,8 44,5 44,50 38,1 7,95 0,30 0,40
0,5 XXS 1GR-A4 21,3 6,4 50,8 44,5 44,50 38,1 7,95 0,30 0,40 6 XF40 1240 1200 1146 1114 1035 995 960
0,75 40 GR-A7 26,7 20,9 50,8 44,5 44,50 38,1 7,95 0,20 0,40 XF46 920 881 826 796 722 693 639
0,75 80 1GR-A7 26,7 18,9 50,8 44,5 44,50 38,1 7,95 0,20 0,40 XF56 640 604 566 521 496 465 419
0,75 160 1GR-A5 26,7 15,6 50,8 44,5 44,50 38,1 7,95 0,30 0,40
0,75 XXS 1GR-A4 26,7 11,0 50,8 44,5 44,50 38,1 7,95 0,30 0,40 8 X862 617 586 572 555 57 490 485
1 40 1GR-A11 33,4 26,6 50,8 44,5 44,50 38,1 7,95 0,20 0,40 X864 505 479 468 453 431 401 396
1 80 1GR-A11 33,4 24,3 50,8 44,5 44,50 38,1 7,95 0,20 0,40 X867 416 395 385 373 355 330 326
1 160 1GR-A7 33,4 20,7 50,8 44,5 44,50 38,1 7,95 0,30 0,40 X872 320 304 296 287 273 254 251
1 XXS 1GR-A5 33,4 15,2 50,8 44,5 44,50 38,1 7,95 0,30 0,40
1 10 mm 1GR-A5 33,4 13,4 50,8 44,5 44,50 38,1 7,95 0,40 0,40 10 X10H82 471 447 436 423 401 373 369
1,5 40 1,5GR14 48,3 40,9 79,4 60,3 54,00 60,3 11,10 0,70 1,30 X10H84 423 401 391 380 361 335 332
1,5 80 1,5GR14 48,3 38,1 79,4 60,3 54,00 60,3 11,10 0,80 1,30 X10H87 46 328 320 311 295 274 272
1,5 160 1,5GR14 48,3 34,0 79,4 60,3 54,00 60,3 11,10, 0,80 1,30
X10H94 233 221 215 209 198 185 183
1,5 XXS 1,5GR-A11 48,3 27,9 79,4 60,3 54,00 60,3 12,70 1,10 1,40
X10H97 176 167 163 158 150 140 138
1,5 14,2 mm 1,5GR-A11 48,3 19,9 79,4 60,3 54,00 60,3 12,70 1,10 1,40
12 X12M102 427 405 395 383 364 339 335
2 40 2GR-A20 60,3 52,5 92,1 69,9 50,80 73,0 11,10 1,00 1,60
X12M106 342 325 317 308 292 272 269
2 80 2GR-A20 60,3 49,2 92,1 69,9 50,80 73,0 11,10 1,10 1,60
X12M112 264 250 244 237 225 209 207
2 160 2GR-A20 60,3 42,9 92,1 69,9 50,80 73,0 11,10 1,20 1,60
X12M120 166 158 154 150 142 132 131
2 160 2GR-A16 60,3 42,9 92,1 69,9 50,80 73,0 11,10 1,30 1,70
2 XXS 2GR-A20 60,3 38,1 92,1 69,9 50,80 73,0 11,10 1,20 1,60 14 A-P106 595 577 563 546 518 482 477
2 XXS 2GR-A16 60,3 38,1 92,1 69,9 50,80 73,0 11,10 1,40 1,70 A-P112 532 505 493 478 454 423 418
2 XXS 2GR14 60,3 38,1 92,1 69,9 50,80 73,0 11,10 1,50 1,80 A-P120 427 406 396 384 365 339 336
2 12,5 mm 2GR14 60,3 35,3 92,1 69,9 50,80 73,0 11,10 1,60 1,80 A-P130 280 265 259 251 239 222 220
2 14,2 mm 2GR14 60,3 31,9 92,1 69,9 50,80 73,0 11,10 1,60 1,80
2 17,5 mm 2GR-A11 60,3 25,3 92,1 69,9 44,50 73,0 12,70 1,90 1,70 16 S112 763 724 707 685 651 605 599
2,5 XXS 2,5-3GR-A20 73,0 45,0 127,0 82,6 63,50 101,6 12,70 3,50 4,30 S120 689 654 638 619 588 547 541
2,5 20 mm 2,5-3GR-14 73,0 33,0 127,0 82,6 54,00 101,6 11,10 4,00 3,80 S130 551 523 510 495 470 437 433
3 40 3GR27 88,9 77,9 127,0 82,6 63,50 101,6 12,70 2,10 4,00 S134 488 464 452 439 417 388 383
3 80 3GR27 88,9 73,7 127,0 82,6 63,50 101,6 12,70 2,30 4,00 S137 443 421 411 398 378 352 348
3 160 3GR-A25 88,9 66,7 127,0 82,6 63,50 101,6 12,70 2,90 4,10 S140 429 407 397 385 366 340 337
3 XXS 3GR-A25 88,9 58,5 127,0 82,6 63,50 101,6 12,70 3,20 4,10 S152 278 264 257 250 237 221 218
3 XXS 3GR23 88,9 58,5 127,0 82,6 63,50 101,6 12,70 3,40 4,20
3 XXS 3GR-A20 88,9 58,5 127,0 82,6 63,50 101,6 12,70 3,50 4,30 18 U152 390 371 354 335 311 296 289
3 16 mm 3GR23 88,9 56,9 127,0 82,6 63,50 101,6 12,70 3,50 4,20 U160 355 340 323 306 291 276 268
3 17,5 mm 3GR23 88,9 53,9 127,0 82,6 63,50 101,6 12,70 3,60 4,20 U170 316 299 287 273 258 244 236
3 25 mm 3GR14 88,9 38,9 127,0 82,6 54,00 101,6 12,70 4,50 3,90
4 40 4GR40 114,3 102,3 152,4 92,1 54,00 127,0 12,70 2,80 4,70 20 3V160 385 363 345 331 312 296 289
4 80 4GR40 114,3 97,2 152,4 92,1 54,00 127,0 12,70 3,20 4,70 3V170 337 324 310 293 276 261 254
4 80 4GR34 114,3 97,2 152,4 92,1 73,00 127,0 12,70 3,70 7,10 3V180 316 300 292 284 269 250 248
4 120 4GR34 114,3 92,1 152,4 92,1 73,00 127,0 12,70 4,10 7,10 3V192 241 227 220 214 200 184 179
4 160 4GR34 114,3 87,3 152,4 92,1 73,00 127,0 12,70 4,40 7,10
4 XXS 4GR34 114,3 80,1 152,4 92,1 73,00 127,0 12,70 4,70 7,10 24 3Y192 534 525 510 493 478 433 416
4 XXS 4GR31 114,3 80,1 152,4 92,1 73,00 127,0 12,70 5,20 7,30 3Y200 516 518 503 482 452 418 402
4 XXS 4GR27 114,3 80,1 152,4 92,1 73,00 127,0 12,70 5,40 7,40 3Y210 453 427 416 403 379 347 341
4 7,5 mm 4GR31 114,3 79,3 152,4 92,1 73,00 127,0 12,70 5,30 7,30 3Y220 365 342 335 324 307 282 276
6 4 20 mm 4GR27 114,3 74,3 152,4 92,1 73,00 127,0 12,70 5,70 7,40 15
C M G N
HOW TO SELECT 3) Finally, refer to the pressure-temperature rating HEAVY DUTY SERIES
THE G-LOK CONNECTOR charts, on pages 14 to 19, to ensure that the Clamp material-Low Alloy Steel
G-LOK connector selected meets the design pressu-
re and temperature requirements for the code to PRESSURE RATING (BAR)
1) Determine the following information needed to
correctly size the G-LOK connector: which it is being specified.
NOM. G-LOK
50C 100C 150C 200C 250C 300C 350C
Maximum Service Pressure and Temperature (Your The standard line of G-LOK connectors and
SIZE SIZE
Design Conditions) products are available in materials and sizes 2 B14 737 648 593 546 513 487 481
The engineering or industry code your project has to fit nearly any requirement. But if your requi- B16 679 597 546 503 472 448 443
specified. (ASME VIII, B31.3, etc.) B20 630 554 506 467 438 416 411
rements, pipe size, material or design condi-
Pipe size and schedule or the I.D. and O.D. of the tions, are not covered by one of our charts, 3 C20 713 628 574 528 496 471 466
C23 651 573 524 483 453 430 425
weld end. please contact Galperti Engineering. We have C25 585 514 470 433 407 386 382
Your piping material. an engineering and design staff ready to help C27 434 382 349 322 302 287 284
you solve your most demanding needs. 4 D27 647 569 520 479 450 427 422
2) Refer to the tables in this catalogue: D31 614 541 494 455 428 406 401
D34 496 437 399 368 345 328 324
Locate your pipe size and schedule in the Butt D40 368 324 296 273 256 243 240
weld hub table on pages 6 to 7, then read across 6 XF40 992 960 917 891 828 796 768
to the corresponding hub size (third column). As HOW TO ORDER XF46 736 705 661 637 578 554 511
an example, the 4 schedule 40 Pipe requires a THE G-LOK CONNECTOR XF56 512 483 453 417 397 372 335
G-LOK Hub size of 4GR40. Also note that this 8 X862 483 425 388 358 336 319 315
chart has weights and dimensions for this hub and X864 397 349 319 294 276 262 259
After following the selection procedures the informa-
for most popular hub sizes. X867 330 290 265 244 229 218 215
tion necessary for ordering G-LOK connectors is X872 257 226 207 191 179 170 168
The G-LOK number for the 4GR40 designates the the quantity, the hub number and material, the seal
correct clamp, bolting and seal ring sizes for this number and seal material, and the clamp number 10 X10H82 368 324 296 273 256 243 240
X10H84 331 292 267 246 231 219 216
connection. The first number refers to the pipe and and clamp material. X10H87 274 241 220 203 191 181 179
clamp size, in our example the pipe size is 4 and X10H94 187 164 150 138 130 123 122
the clamp would be the 4. More information on A G-LOK assembly consists of the following: X10H97 143 126 115 106 100 95 94
the clamp can be located in the Clamp table on 12 X12M102 332 293 267 246 231 219 217
Two G-LOK Hubs
page 11. X12M106 269 237 216 199 187 177 176
One G-LOK Clamp Set, with four studs and eight X12M112 209 184 168 155 145 138 136
The final set of numbers is the G-LOK seal for this X12M120 134 118 108 99 93 89 88
nuts (Spherical washer available on request)
connection (in our example this would be a 40).
14 A-P106 468 412 376 347 326 309 305
The G-LOK seal chart is located on page 10. One G-LOK Seal Ring A-P112 411 362 331 305 286 271 268
A-P120 332 292 267 246 231 219 217
A-P130 220 193 177 163 153 145 143
4 4GR25 1341 1296 1250 1214 1197 G-LOK Finite Element Model
4GR27 1114 1077 1039 1009 994
4GR31 959 927 894 868 856
4GR34 630 609 587 570 562
4GR40 361 349 336 327 322
G-LOK CONNECTORS VS ANSI FLANGE G-LOK CONNECTORS VS FLANGES
5 5GR31 1319 1319 1312 1275 1256 G-LOK ANSI FLANGES
5GR34 1037 1037 1037 1037 1037 1500#
5GR40 840 840 840 840 840 The G-LOK clamp connection has a significantly
SIZE ASSEMBLY ASSEMBLY
5GR46 623 623 622 610 601 smaller diameter and a shorter lenght than that of a
5GR52 360 356 244 334 329 WEIGHT KG. WEIGHT KG.
comparably rated ANSI or API ring joint flange con- 2 9 27
6 6GR40 1108 1108 1108 1108 1108 nection, reducing weight and space required for 3 18 50
6GR46 822 822 822 822 822 make-up. 4 24 74
6GR52 663 663 663 663 663 The G-LOK is especially well suited to systems that 6 62 175
6GR62 421 407 392 381 375 8 100 300
require close piping and hookup arrangements. As
10 190 485
8 8GR62 661 661 661 661 661 there are no bolt holes to align, the G-LOK clamp 12 280 730
8GR72 472 472 472 472 472 may be rotated to conveniently locate the bolts for 16 560 1.370
8GR76 415 415 414 403 397 easy make-up and break-down of the connections.
8GR82 299 288 278 270 266 WEIGHTS GIVEN ARE APPROXIMATE
The G-LOK Connector is designed to offer the the two hubs, and as they draw the hubs together HEAVY DUTY SERIES
strength and sealing integrity of a welded joint and the seal ring rib ensures proper seal alignment. Clamp material-Low Alloy Steel
the versatility of a mechanical joint. It serves the sa- As the hubs are drawn together by the clamp as-
me purpose as a bolted flange assembly, with the sembly, the seal ring lips deflect against the inner PRESSURE RATING (BAR)
advantages of being more easily installed, lighter sealing surfaces of the hubs. This deflection elastical-
and smaller. ly loads the lips of the seal ring against the inner NOM. G-LOK
20C 50C 100C 150C 150C
A self-energized, pressure activated connection, the sealing surface of the hub, forming the self-energi- SIZE SIZE
G-LOK, clamp-type connector consists of four basic zed seal. Internal pressure reinforces this seal, so the
2 B14 1532 1480 1428 1387 1367
elements: sealing action of the G-LOK is both self-energized B16 1411 1363 1315 1278 1259
and pressure energized. B20 1309 1265 1220 1185 1168
(1) Hub
3 C20 1483 1433 1382 1343 1323
(2) Clamps C23 1354 1308 1262 1226 1208
(3) Seal C25 1216 1175 1133 1101 1084
C27 903 872 842 818 806
(4) Bolting
4 D27 1345 1299 1254 1218 1200
D31 1210 1210 1191 1157 1140
The hubs are usually welded to pipe; the seal is in- D34 950 950 950 934 920
stalled and the bolting is tightened on the clamps to D40 765 739 713 693 683
form a pipe connector that provides superior 6 XF40 1550 1500 1433 1393 1294
strength and leak integrity. The G-LOK is commonly XF46 1150 1101 1033 995 903
used in service with temperatures of up to 650C. XF56 800 755 708 651 620
The G-LOK also excels in high pressure applica- 8 X862 703 703 703 703 703
tions, with working pressure of 30,000 psi not un- X864 616 616 616 616 616
common. X867 554 554 55 554 554
X872 501 501 498 484 477
The G-LOK clamp has been designed for the opti-
mum strenght of a bolted connection. Since the bolts 10 X10H82 666 666 666 666 666
are at right angles to the axis of the pipe, they do X10H84 629 629 629 624 615
X10H87 569 550 531 515 508
not receive direct bending and pressure loads. This X10H94 388 375 362 352 346
system of clamping provides greater strength than X10H97 298 288 278 270 266
ANSI or API flanges at a fraction of the seal size G-LOK in FREE position
12 X12M102 549 549 549 549 549
and weight as a result of this design. Less bolting X12M106 501 501 501 501 498
torque is required for proper seating of the seal. X12M112 434 420 405 393 387
The design of the connector provides considerable X12M120 279 270 260 253 249
stored energy in the system when compared with 14 A-P106 624 624 624 624 624
ANSI or API flanges. This stored energy works to A-P112 548 548 548 548 548
provide leak resistance during thermal cycling and A-P120 484 484 484 484 484
A-P130 414 414 414 414 407
maintains proper bolt loading.
When properly installed, the G-LOK will usually 16 S112 889 889 889 889 889
provide greater bending and torsional strength than S120 785 785 785 785 785
S130 672 672 672 672 672
the connecting pipe. The full face contact of the con- S134 625 625 625 525 625
nector resists bending and ensures rigidity not provi- S137 592 592 592 592 592
ded by other clamp-type connectors. The pressure S140 582 582 582 582 582
S152 453 438 422 410 404
and temperature limitations are determined only by
the materials of construction. 18 U152 462 462 462 462 462
U160 422 422 422 422 422
U170 374 374 374 374 374
HOW THE G-LOK CONNECTORS SEALS 20 3V160 476 476 476 476 476
3V170 401 401 401 401 401
3V180 362 362 362 362 362
The seal ring in the G-LOK resembles a T in cross G-LOK in MADE-UP position 3V192 284 284 284 284 284
section. The base of the T is the rib that is held by
abutting hub faces as the connection is made up. 24 3Y192 623 623 623 623 623
3Y200 607 607 607 607 607
The top of the T forms the lips that seal against the G-LOK clamp connectors are interchangeable with
3Y210 525 525 525 525 525
inner surfaces of the hubs. other connectors designed and manufactured accor- 3Y220 429 429 493 429 429
2 In the assembly of the connection, the clamps fit over ding to the same standard. 19
C M G N
20 1
QUA
TE R L
IS
TUV
IT
YDS RE G
YC
O M PA
LO
L Y
IS O 0 01
9 NATIONAL
A C C R E D I T A-
TION AD - Merkblatt WO/TRD 100.
O F C E R T I F I- 6A 0388
GALPERTI ENGINEERING
AND FLOW CONTROL CONTACT ADDRESS:
Area Industriale
22050 COLICO (LC) ITALY
Tel. 0341/930780 Fax
0341/930777