Professional Documents
Culture Documents
Pad Area: Plan Polymer Room
Pad Area: Plan Polymer Room
Pad Area: Plan Polymer Room
Pad Area
Figure 1
Figure 2
200mm Thk
Loads Assumption
DL = 6000 kpa( pad weight, equipment included ) ( NSCP Specs for Heavy Equipments )
yc = 24 Kn/m
DL= 0.2(1.5)(24) + 6(1.5)
DL= 16.2 kn/m
Dead Load Total = 16.2 Kn/m
5000mm
No. of bolts= ( For bolts Design for 200mm spacing)
200mm
22.68 (5000)
T=
50
Tensile failure occurs along the surface of the cone at an avereage stress of 4 f'c ( REF. 2003
American Institute of Steel Construction Inc. Steel Guide )
Fig. 1.2
Design Objective :
1.Prove that the allowable compressive stress(3000 psi ) of existing concrete will not exceed its limit due to failure of tension.
2. Design an anchor bolt that could carry the weight of slab .
T
Ag =
0.33 Fu
0.5
Ag =
0.33 (58)
Ag = 0.026 in2 Use 0.142 in2 (1/2 inch dia.) See Table 2.A
Ref. (American Institute of Steel Construction)
T(1000)
A=
2 f'c
0.5(1000)
A=
23000
A= 4.56 in2
0.5(1000)
Stress =
4.56
Allowable Stress that concrete will not rupture thru tension failure
W Steel Section
W Steel Section
Fig.3
Weight Ultimate For Beam AB
Loads Assumption
DL = 6000 kpa( pad weight, equipment included ) ( NSCP Specs for Heavy Equipments )
yc = 24 Kn/m
Figure 3.1
Design Of Beam
Given :
Mu = 85 kn-m Span= 5m
Fy = 248 mpa Ra= 68.04 kn
Wu = 27.216 kn/m
A 36 W Section
Design Objective
Design a beam that could carry the weight of slab including its super imposed loads
Mu
0.66 fy ( Compact Section ) =
Sx
85.05 ( 1000)
0.66 (248) =
Sx
3
Sx = 519.611 use 895 x 10 for comercial section W 14 x 38
Condition;
Fb( Allowable) > fb ( Actual ) 85.05 (1000)
fb=
895
Fb = 0.66 (248)
Fb= 163 Mpa fb= 95.05 Mpa
V
fv =
d(tw)
68.04(1000)
fv =
358.1 (7.9)
fv= 24 mpa
Summary
Anchor Bolt Use: Min. of 12 mm
Loads/ Stress Loads/ Stress A36 Carbon Steel Anchor Bolt Tread headed , fy =248 Mpa, Fu= 400 mpa,
Remarks
Allowable( MPA) Actual (Mpa)
Tension Failure
219 psi 109.64 psi Safe
W Section
Loads/ Stress Loads/ Stress Use: W 14 x 38 A 36 Steel ( For Beam)
Remarks
Allowable Actual Fy = 248 mpa ,Fu= Mpa
Flexure
163 95.05 Safe
Shear
99.2 24 Safe