Professional Documents
Culture Documents
DNV 2.7-3 Pad Eye Calculations For 15k Debris Catcher
DNV 2.7-3 Pad Eye Calculations For 15k Debris Catcher
Reference: Appendix-A
MGW = 11 MT
E = Elastic modulus 210000 Mpa
Dpin = Diameter of shackle pin 28 mm
DH = Diameter of pin hole 30 mm
t = Total thickness of padeye at hole 42 mm
a = Weld throat thickness 6 mm
Rpl = min distance from hole centre to edge 50 mm
Rch = Radius of cheek plate 30 mm
tpl = thickness of pad eye plate 30 mm
tch = thickness of cheek plate 6 mm
G = gravitational acc 9.81 m/sec2
PL SKL = % load of F in the pad eye considering 0.3325
all skew load effect
v = angle between sling and vertical 45 degree
0.785398163 rad
Rpad = 44.29 mm
Rpad (actual) = 45 mm
RSF:
RSF=(1.2
163138.1 N
)/(cos())
Bearing Pressure:
Tearout Stress:
(2)/
se > ((2)) 132.63 Mpa with calculated Rpad
129.47 with actual Rpad
()/()
se > 64.74 Mpa