Professional Documents
Culture Documents
Saveetha School of Engineering Saveetha University Department of Automobile Engineering Lab Requirements
Saveetha School of Engineering Saveetha University Department of Automobile Engineering Lab Requirements
SAVEETHA UNIVERSITY
LAB REQUIREMENTS
Sr.
No. Description Qty
1. Lead Acid Battery -12V (55 to 70 AH rating) 2No.
2. Hydrometer 3No.
3. Battery Capacity Tester 2No.
4. Battery Charger Heavy Duty (6-36 Volts, 0-10 Amp) 2No.
5. Dwell Tachometer 2No.
6. Ignition Timing Light with Advance Mechanism (12V Battery) 2No.
Spark Plug Cleaning & Testing Machine With Compressed Air Supply
7. Line 1No.
8. Test Lamp 2No.
Alternator Regulator Tester for testing electronic Regulator
9. (Automobile Range) 2No.
10. Head Light Beam Aligner for Light/ Heavy Vehicle 1No.
11. Horn with Relay Different Types 3No.
12. Starter- Over running clutch & Reengaged 2No.
Auto Electric Wiring Board Complete with all Auto Electric
13. Points/equipments 1No.
14. Electronics Ignition System Board Complete 1No.
15. Magneto Ignition System Board 1No.
16. Auto Electrician Tool KIt 2No.
2No
17. Ammeter
2No
18. Voltmeter
2No
19. Multimeter
20. Wire gauge 2No.
21. Feeler Gauge 2No.
22. Tool Trolley 1No.
23. Bench Vice 4 Inches 2No.
24. Wire Stripper 2No.
25. Combination Pliers 3No.
26. Hand Tools Kit 1 Kit
27. Dynamo/Alternator/Regulator test bench for automobile range 1Each
28. Cadmium stick tester (Battery tester) 1 No.
29. Compressed Air Supply according to lab. Dimensions Complete
V I - IC engines lab