Professional Documents
Culture Documents
BRTC Rate
BRTC Rate
Contact person: Prof. Dr. Md. Shamsul Hoque; Room No 408; Mobile: 01819 557964
PABX Nos: 9665650-80, 8618344-49, 8614640-44, 8616833-38, Ext. 7226; Fax - 9665639
BRTC Office Time : Sat to Wed => 9:00 am - 5:00 pm & Thu => 9:00 am - 1:00 pm
[* Field Visit inside Dhaka Tk. 5,000] [** Field Visit inside Dhaka Tk. 7,000] [Field Visit within greater Dhaka Tk. 8,000]
[Field visit outside Dhaka Tk. 10,000] [Field visit in remote area Tk. 15,000]
Sl. Test Rate Sl. Test Rate
Name of Test Name of Test
No. (Tk.) No. (Tk.)
R.C.C PIPES (Max. length of pipe is 2'-6") SOIL
1 Pipes (dia upto 600mm) 3,000 1 CBR of soils (Three points) 10,500
2 Pipes (dia above 600mm and upto 900mm) 3,600 2 Per spot field density(with necessary tests; min. 5 spots)* 5,000 + *
3 Pipes (dia above 900mm and upto 1200mm) 4,700 3 Sp. gr. 1,300
4 Pipes (dia above 1200mm and upto 1524mm) 5,600 4 Hydrometer, sieve analysis & sp. gr. 3,200
5 In-situ pipe testing * 3,000 + * 5 Linear Shrinkage 1,100
STEEL (for >60 grade rod - fees would by 25% higher) 6 Skrinkage limit 900
1 Tension (Deformed bar upto 25mm), for a set of 3 nos 1,300 7 Liquid limit / Plastic limit 1,800
2 Tension (Plain bar upto 25mm), for a set of 3 nos 1,200 8 Standard Proctor 3,700
3 Tension (Def. bar >25mm), for a set of 3 nos 1,800 9 Modified Proctor 4,200
4 Tension (Plain bar >25mm), for a set of 3 nos 1,700 10 Unit weight (wet & dry) 1,200
5 Bend test (upto 25mm), for a set of 3 nos 500 11 Void ratio (Sp. Gr. & Unit Wt.) 2,100
6 Rebend test (upto 25mm), for a set of 3 nos 700 12 Moisture content 500
7 Bend test (above 25mm), for a set of 3 nos 600 13 Organic matter content 2,100
8 Rebend test (above 25mm), for a set of 3 nos 800 14 Loss on ingnition 1,700
9 Shear Test, for a set of 3 nos 1,100 15 Grain size analysis 1,000
10 Hardness (Rockwell), for a set of 3 nos 900 16 Grain size analysis by wash sieving 1,400
11 Impact, for a set of 3 nos 1,100 17 Sand equivalent test 2,600
12 Stress-strain curves (Modulus of Elasticity), for a set of 3 nos 4,700 18 Permeability (cohesieve) 3,700
13 Deformation Measurement, for a set of 3 nos 1,100 19 Permeability (Non-cohesieve sample) 1,600
14 Spring test, for per specimen 1,700 20 One dimensional consolidation (full) 9,000
15 Tension (Eye-hooks, anchor bolt) for a set (LC 800/=) 2,000+800 21 One dimensional consolidation (e - log p) 6,000
16 W i ht for
Weight, f a sett off 3 nos 500 22 C
Consolidated
lid t d drained
d i d test
t t (Direct
(Di t Shear
Sh Test)
T t) 4 200
4,200
17 H.T. Wire, for a set of 3 nos 2,500 23 Consolidated drained compression triaxial test 20,000
18 Strand, for a set of 3 nos 7,500 24 Consolidated quick test (Direct Shear Test) 3,700
19 Angle/Plate, for a set of 3 nos (LC 800/=) 1,500+800 25 Con. undrained triaxial compression test with pore pressure 15,000
Tiles (for Acid Resistance - see Brick) (set of 5 nos) 26 Con. undrained triaxial compression test without pore pressure 10,000
1 Size & shape 1,100 27 Unconfined compression test 2,300
2 Absorption (with flexural needs additional 5 nos.) 1,100 28 Unconsolidated quick test (Direct Shear Test) 2,600
3 Flexural / Modulus of Rupture 1,200 29 Uncon. undrained triaxial compression test without pore pressure 7,000
4 Warpe 1,100 30 Max. and Min. density of cohesionless soil 3,700
31 Consolidated undrained triaxial extension test without pore pressure 12,000
El t
Elastomeric
i Bearings
B i (Min.
(Mi LC 300/ + 100/ No
N off sample)
l ) Elastomeric
El t i Bearings
B i (Min.
(Mi LC 300/ + 100/ No
N off sample)
l )
Vulcanized rubber and thermoplastic elastomer in tension and Determination of durometer hardness, ASTM D2240 (set
1 3,200 6 1,600
elongation at break, ASTM D412 (set of 3) of 1)
Short duration compression test on plain and steel
Test for rubber durability-deterioration in an air oven,
2 laminated elastomeric bearings for bridges, ASTM D4014 3,700 7 3,200
ASTM D573 (set of 3)
(set of 1)
Long duration compression test on plain and steel
Test for determining the adhesion on rigid substrates,
3 laminated elastomeric bearings for bridges, ASTM D4014 7,400 8 2,600
ASTM D429 (set of 1)
(set of 1)
Dimensional test (external and internal) giving number &
4 Determination of shear modulus, ASTM D4014 (set of 3) 4,700 9 thickness of steel plates, elastomer parallelism, elastomer 1,600
thickness, ASTM D4014 (set of 1)
5 Test for compression set, ASTM D395 (set of 4) 4,200 10 Ash content 2,600
* For complete design, fees would be Tk. 10,000/= instead of 6,700; Drinking water package (wihtout TC & FC) = 3,500+1,000 = Tk. 4,500/
[* Field Visit inside Dhaka Tk. 5,000] [** Field Visit inside Dhaka Tk. 7,000] [Field Visit within greater Dhaka Tk. 8,000]
[Field visit outside Dhaka Tk. 10,000] [Field visit in remote area Tk. 15,000]
Sl. Test Rate Sl. Test Rate
Name of Test Name of Test
No. (Tk.) No. (Tk.)
Calibration of Miscellaneous Equipment Chemical Test of Cement
1 Theodolite / Tacheometer 8,500 1 Loss on ingnition (Ordinary Portland Cement) 1,600
2 Level 6,500 2 Loss on ingnition (Compsite Blended Cement) 5,300+400
3 Vibration Machine 5,300 3 Sulfer Trioxide (S03) 4,200+300
4 Electronic Banalce 2,600 4 Insoluble Residue 3,200+300
5 Mixture Machine (Mortar cube & setting) 5,300 5 Sulfer Trioxide (S03)+ Insoluble Residue 6,300+500
6 Joilting Table 5,300 6 Silica (SiO2) 6,300+300
7 Vicat Apparatus 4,200 7 Ferric Oxide (Fe2O3) 6,400+800
8 Sieve 2,100 8 Silica+ Alumina (Sio2 + Al2O3) 19,000+1600
9 Cement Autoclave Machine 5,300 9 Alumina or Aluminium Oxide (Al2O3) 15,800+1300
10 Aluminium Oxide (Al2O3) + Ferric Oxide (Fe2O3) 15,800+1300
Pile Load Test 11 Aluminium Oxide(Al2O3)+Ferric Oxide(Fe2O3)+Silica(SiO2) 19,000+1600
1 Test Supervision & Report (per Pile) 52,500 12 Calcium Oxide (CaO) 13,700+1100
Pile Integrity Test 13 Calcium Oxide + Silica (CaO+SiO2) 16,900+1300
1 Per Pile (min. fee Tk. 40,000 for 10 nos. of pile) 2,100 14 Magnesium Oxide (MgO) 18,000+1900
15 Calcium Oxide (CaO) + Magnesium Oxide (MgO) 18,000+1900
Soil Boring (Including relevant tests & report) 16 Calcium Oxide(CaO)+Mag. Oxide(MgO)+Silica(SiO2) 24,300+2200
1 Soil Boring per bore 17 Calcium Oxide (CaO)+Mag. Oxide (MgO)+ Al2O3 30,600+2500
Within Dhaka City - depth upto 60'-0" 20,000 18 Cal.Oxide(CaO)+Mag.Oxide(MgO)+Fer.Oxide(Fe2O3) 24,300+2700
Within Dhaka City - depth upto 100'-0" 30,000 19 Cal. Oxide(CaO)+Mag. Oxide(MgO)+Fe2O3+Al2O3 26,400+3300
Outside Dhaka City - depth upto 60'-0" 25,000 20 Cal.Oxide(CaO)+Mag.Oxide(MgO)+Fe2O3+Al2O3+SiO2 29,600+3600
Outside Dhaka City - depth upto 100'-0" 35,000 21 Tricalcium Aluminate (C3A) 15,800+1300
(Notes: Minimum 3 borings for a particular site; 22 Tricalcium Silicate (C3S) 27,400+2100
27 400+2100
Guidelines := upto 3 katha : 3 nos; 3 - 5 katha : 5 nos; 6 - 10 katha : 8 nos) 23 Dicalcium Silicate (C2S) 27,400+2100
[* Field Visit inside Dhaka Tk. 5,000] [** Field Visit inside Dhaka Tk. 7,000] [Field Visit within greater Dhaka Tk. 8,000]
[Field visit outside Dhaka Tk. 10,000] [Field visit in remote area Tk. 15,000]
WATER TEST (APPROVED RATES, Effective from January 2009)
Sl. Test Rate Sl. Test Rate
Name of Test Name of Test
No. (Tk.) No. (Tk.)
Routine Drinking Water Parameters (Package) Water Quality Parameters
Parameters Miscellaneous Parameters
1 pH 1 pH 150+50
2 Color (True or Apparent) 2 Color (True or Apparent) 100+100
[* Field Visit inside Dhaka Tk. 5,000] [** Field Visit inside Dhaka Tk. 7,000] [Field Visit within greater Dhaka Tk. 8,000]
[Field visit outside Dhaka Tk. 10,000] [Field visit in remote area Tk. 15,000]