Professional Documents
Culture Documents
SWP - Formwork Construction
SWP - Formwork Construction
Delivery Lorries are to observe speed limit and directional movement on worksite.
Lifting Supervisor to ensure that the materals are within the SWL of the crane and
gears before hoisting.
Only riggers and signalmen are allowed to handle the hoisting of the loads.
Loads shall be lifted in a method that will prevent them from spinning or overturning.
Workers have the necessary PPE (Leather gloves, helmet, safety boots).
Workers must wear safety harness while installing the life line. Life line shall anchor to
rigid point and always keep in tension.
Life line shall be provided once the formwork frames are constructed.
Barricades are to be provided to all open side, into or through which a person may fall
while carrying out formwork construction.
Ensure proper working platform i.e. strong & good materials is used for working
platform, secure and adequate, not over loaded, not uneven loading, etc.
Workers must wear proper PPE while cutting the timber planks.
All electrical parts should be checked before use and make sure wire is not directly
contacted with metallic materials.
When working at height and on scaffold system, always observe working at height safe
work procedures.
Formwork supervisor must ensure the formwork structure is complied with PE design if
required.
Warning sign and barricades should be provided during construction and dismantling of
formwork structure.