Download as xlsx, pdf, or txt
Download as xlsx, pdf, or txt
You are on page 1of 2

1.

311 BC-2 Belt conveyor tail drum lagging damaged, rubber lagging removed due to belt sway coming continiously.
2. 311 BC-2 Belt conveyor tail drum and snub pulley bottom spillage material cleaned.
3. 331 BC-1 Belt conveyor discharge chute jam cleared. (Chute jammed due to wet material) Return scrapper adjusted.
4. 331 BC-4 Belt conveyor discharge chute jam cleared. (Chute jammed due to wet material)
5. 331 BC-4 Belt conveyor discharge chute hole patch work done.
6. 311 BC-1 Belt conveyor discharge chute jam cleared. (Chute jammed due to wet material)
7. 311 BC-3 Belt conveyor return scrapper fixed.
8. Cooler water spray nozzles cleaned.
9. Kiln supporting rollers cleaned.
10. Kiln girth gear spray pattern checked found ok.
11. Cooler baghouse hopper no-5 high level alram came, hammering done.
12. Blending silo top airslides covered with tarpallen.
13. 331 WF-1 to WF-5 weigh feeders discharge chute jam cleared.
y coming continiously.

eturn scrapper adjusted.

You might also like