Professional Documents
Culture Documents
4.1 Analogue Ip Set Point
4.1 Analogue Ip Set Point
4.1 Analogue Ip Set Point
Aims:
To adjust the setpoint using one of the analogue inputs, and to stop and
start the drive using a digital input
Narrative:
Consider a pump that used to circulate cooling water for a Diesel Generator.
The flow of the water is to be set by an operator using an analogue input to the
drive.
Notes:
Instructions:
Follow the exercises given to you, setting the parameters to configure
the drive suitable for use within the system.
Parameters:
Settings:
Modifications/notes:
Settings:
P0700 = P1000 =
Modifications/notes
3 Consider any modifications that you may make to improve your settings.
List them in the box provided.
Modifications/Notes:
What happens if you set P0700 = 1 and P1000 = 2 and visa versa?