Professional Documents
Culture Documents
All Lines and Hoses, Sensor Cables - Checking Tightness and Condition
All Lines and Hoses, Sensor Cables - Checking Tightness and Condition
09
MODEL 374.5 /6
MODEL 375.1
MODEL 375.3
MODEL 375.4
MODEL 940, 942, 943, 944
MODEL 930, 932, 933, 934
MODEL 950, 952, 953, 954
MODEL 957
MODEL 958
MODEL 970, 972, 974, 975, 976
Checking
1 Visually check all lines and hoses of the Attention should be paid to leaktightness
brake system, and all other lines and hoses of the lines and hoses as well as damage or
for oil, brake fluid, fuel, coolant and other conditions (e.g. corrosion, porosity,
compressed air chafing marks etc.) which rule out further
use.
If damage/defects are found:
BE42.10-N-1002-10B Permissible pressure loss without operation of the bar 0.1 0.1
brake system (measurement period 10 min)
© Daimler AG, 10/28/09, G/09/09 / ap00.20-w-0051a / All lines and hoses, sensor cables - checking tightness and condition Page 1/2
MODEL 374.5 /6 MODEL 375.1 MODEL 375.3 MODEL 375.4 MODEL 940, 942, 943, 944 MODEL 930, 932, 933, 934 MODEL 950, 952, 953, 954 MODEL 957 MODEL 958 MODEL 970, 972, 974, ...
BE42.10-N-1002-10B Permissible pressure loss without operation of the bar 0.1 0.1
brake system (measurement period 10 min)
BE42.10-N-1002-10B Permissible pressure loss without operation of the bar 0.1 0.1
brake system (measurement period 10 min)
BE42.10-N-1002-10B Permissible pressure loss without operation of the bar 0.1 0.1
brake system (measurement period 10 min)
© Daimler AG, 10/28/09, G/09/09 / ap00.20-w-0051a / All lines and hoses, sensor cables - checking tightness and condition Page 2/2
MODEL 374.5 /6 MODEL 375.1 MODEL 375.3 MODEL 375.4 MODEL 940, 942, 943, 944 MODEL 930, 932, 933, 934 MODEL 950, 952, 953, 954 MODEL 957 MODEL 958 MODEL 970, 972, 974, ...