Professional Documents
Culture Documents
Astm B62
Astm B62
MECHANICAL PROPERTIES
- Yield Strength : Max. 210 Mpa
- Tensile Strength : Max. 400 Mpa
- Elongation in 50mm : Max. 8%
- Reduction in area : -
- Hardness : 139 - 202 HB
CHEMICAL COMPOSITION
Alloy Element C Mn P Si Cr Ni Fe
Composition Max (%) 3.00 1.25 0.080 3.00 2.75 22.0 74.97
Limit Min (%) 0.70 1.50 1.75 18.0 67.92
SS 304 + GRAPHITE
MECHANICAL PROPERTIES
- Yield Strength : 205 Mpa
- Tensile Strength : 515 Mpa
- Elongation in 50mm : 30%
- Reduction in area : 50%
- Hardness : -
CHEMICAL COMPOSITION
Alloy Element C Mn Si P S Cr Ni
Composition Max (%) 0.080 2.00 1.00 0.045 0.030 20.0 11.0
Limit Min (%) 18.0 8.0
CHEMICAL COMPOSITION
Alloy Element C Mn Si P S
Composition Max (%) 1.00 0.40 0.040 0.050
Limit Min (%) 0.40
ASTM A36
MECHANICAL PROPERTIES
- Yield Strength : Min. 250 Mpa
- Tensile Strength : Min. 400-550 Mpa
- Elongation in 50mm : Min. 23%
ASTM B62
CHEMICAL COMPOSITION
Alloy Element C P S Si Cu
Composition Max (%) 0.26 0.04 0.05 0.40 0.20
Limit Min (%)
MECHANICAL PROPERTIES
- Yield Strength : Min. 131 Mpa
- Tensile Strength : Min 248 Mpa
- Elongation in 50mm : Min. 15%
- Reduction in area : Min 35 %
- Hardness, HB : -
CHEMICAL COMPOSITION
Alloy Element Cu Sn Pb Zn Fe Ni Sb P S Al Si
Composition Max (%) 86,00 6,00 6,00 6,00 0,30 1,00 0,25 1,50 0,08 0,005 0,005