Professional Documents
Culture Documents
Pin Radio Gm300
Pin Radio Gm300
Above are the Pin-outs of Motorola GM300 Accessory connector. This connector can be
ordered through
Motorola dealers. Hardware Kit that includes 16 connector pins, and housing - Kit
#HLN9457
Connection to SRP-1
Make up a link cable as following table
SRP-1 Connector Pin GM300 ACC connector Pin
Pin 2 (+12V)
Pin 3 (RX AF)
Pin 4 (TX AF)
Pin 5 (PTT)
Pin 6 (SQLS)
Pin 9 (GND) -
-
-
-
-
- Pin 13 (Switch A)
Pin 11 (Discriminator AF Output)
Pin 5 (Flat Transmit Audio)
Pin 3 (Microphone PTT)
Pin 8 (COR or Programmable I/O) **
Pin 7 (Ground)
** For the 16 Channel versions, Pin 8 must be programmed as "PL/DPL & CSQ Detect -
Active Low" using GM300 programming software. Other programmable Pins should be
disabled.
When you use DP/DPL you need to ground the Hook terminal on Microphone plug (Pin3).