This document records the results of a mechanical running test of a dust extraction fan. It measures various parameters like pressure, temperature, current, speed, and vibration at intervals over the 2 hour test period. Acceptance criteria are provided for vibration levels and bearing temperature. The test is used to ensure the equipment is functioning properly before being put into operation.
This document records the results of a mechanical running test of a dust extraction fan. It measures various parameters like pressure, temperature, current, speed, and vibration at intervals over the 2 hour test period. Acceptance criteria are provided for vibration levels and bearing temperature. The test is used to ensure the equipment is functioning properly before being put into operation.
This document records the results of a mechanical running test of a dust extraction fan. It measures various parameters like pressure, temperature, current, speed, and vibration at intervals over the 2 hour test period. Acceptance criteria are provided for vibration levels and bearing temperature. The test is used to ensure the equipment is functioning properly before being put into operation.
1. Date : 2. Start Time of Run : 3. Stop Time of Run : 4. Pressure, Temperature and Current :
Time after Start-up (min.) 0 15 30 45 60 75 90 105 120
Suction Press. (barG) Discharge Press. (barG) Temp. (C) ① ② ③ ④ Ambient temp. (C) Note : Mech. run test will be continued until bearing temp. is saturated (Temp. diff. within 1.0C/15 min.). However, minimum is 1 hour and maximum is 2 hours. 5. Current Amp. 6. Voltage Volt 7. Speed RPM 8. Vibration (μm p-p or mm/sec RMS) Motor
Note : Vibration will be checked after start-up and Fan
measured after 30 min. of start-up.
Point Horizontal Vertical Axial
① ② TOTAL JUDGMENT (Acceptable / NG) Appearance Good / NG Criteria for Vibration / Bearing Temp. Vibration Acceptable / NG Fan < 90 m p-p Vibration Bearing Temp. Acceptable / NG Bearing < 80C Temp. REMARKS