The document is a commissioning checklist for a dust extraction design project. It lists items to check such as whether the dust collector and fan have been assembled correctly according to instructions. It also checks that the duct system and accessories like dampers and filters have been installed properly and that an electrician will be available for startup of the equipment.
The document is a commissioning checklist for a dust extraction design project. It lists items to check such as whether the dust collector and fan have been assembled correctly according to instructions. It also checks that the duct system and accessories like dampers and filters have been installed properly and that an electrician will be available for startup of the equipment.
The document is a commissioning checklist for a dust extraction design project. It lists items to check such as whether the dust collector and fan have been assembled correctly according to instructions. It also checks that the duct system and accessories like dampers and filters have been installed properly and that an electrician will be available for startup of the equipment.
Y N N/A The dust collector has been assembled and secured in place in accordance with the furnished instruction manual? Grounded if required?
The fan, if it isn’t installed by
the factory, has been installed per the specifications and in accordance with the furnished instruction manual. Check the fan rotation and alignment by rotating wheel and confirming that there is no rubbing noise. The damper, silencer, safety filter(s) and other accessories have been installed per the specifications and the furnished instruction manual(s).
Fabricated duct system has
been installed and connected to the collector.
Confirm the compressed
air line been connected?
Has an in-house electrician or the electrical contractor been scheduled to be at the startup of the equipment?