Gustavo

Te envío los pasos para configurar la IER 400.

IER configuration

Connect a laptop to IER with an UTP cable. Configure 192.168.0.50

IP address in the laptop. Connect to IER via http. The IER IP address
is 192.168.0.100.
One time connected to IER enter the user "admin" and password
"13542" on your browser.
Step 1.
Go to Connection Configuration -> Rs232 com settings and change
“Number of data bits” value to 8 and “Parity” value to “None”.
Press “Apply all modifications”

Step 2.
Go to Configuration and Adjustements -> Emulation Parameters and
change “Possible values:” value to “Main transitions”.
Press “Apply all modifications”

Step 3
Go to Configuration and Adjustements -> Printer Parameters and
change “Vertical global offset (1/10 mm)” value to “-10”, and change
“Print pos global offset (1/10 mm)” value to “5”.
Press “Apply all modifications”